1 / 18

Welcome to the ease of off-line programming your Mazaks

You bought a Mazak, which is a hard-working machine, and a smart choice. Now the question is how to tool it up to get maximum production. You should get the full info on MazaCAM: your smart tool. Welcome to the ease of off-line programming your Mazaks

dawson
Download Presentation

Welcome to the ease of off-line programming your Mazaks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. You bought a Mazak, which is a hard-working machine, and a smart choice.Now the question is how to tool it up to get maximum production.You should get the full info on MazaCAM: your smart tool... • Welcome to the ease of • off-line programming your Mazaks • Have you ever wished that you could convert between controls including to the latest Matrix control? • Would you like to write your Mazatrol programs completely off-line, on your PC or laptop? • How about drawing a part using an easy-to-use CAD system, or importing an existing CAD drawing, and then convert the CAD drawing to ready-to-go Mazatrol? • These, and many other features, are the benefits that current MazaCAM users take full advantage of. 1530 The Alameda, Suite 100 • San Jose, CA • 95126 408-249-1529 | www.mazacam.com | mazacam@mazacam.com

  2. Do you want to run your earlier Mazatrol programs on your new Mazak machine-tools? Recoup Programming Hours Invested In Your Proven Programs When you put a new CNC into your shop, one of the questions is “How long is it going to take to get up and running with this new machine?” With your earlier CNCs, you usually have a large library of proven programs made over years of effort. “The new machine will have more power, but how can we use those hundreds of existing, proven programs?” 1530 The Alameda, Suite 100 • San Jose, CA • 95126 408-249-1529 | www.mazacam.com | mazacam@mazacam.com

  3. Achieve higher efficiency by programming your Mazaks off-line, and don’t waste valuable machine time Mazaks are valuable machine tools. It’s up to you to get the most out of them. You want to achieve the highest level of efficiency possible. An example of inefficiency in a shop is machines tied down doing things other than cutting parts, like programming at the control, setup, etc. The MazaCAM Off-line Editor gives you advanced programming capabilities that are aimed at putting your Mazaks to work, and making you money. MazaCam is compatible with the range of generations of Mazak controls from the earliest T2 to the latest Matrix control. It supports M2, M32, M-Plus, Fusion 640M, up from T1, T2, T3, T32, T-Plus, Fusion 640T, 640MT, Fusion-Pro and the Matrix controls. Also all standard G-code CNCs. (call for details). 1530 The Alameda, Suite 100 • San Jose, CA • 95126 408-249-1529 | www.mazacam.com | mazacam@mazacam.com

  4. Program Directly from CAD Draw in CAD or import IGES or DXF CAD files. Simply select tools and assign cuts to the geometry and you get Mazatrol output. Import CAD files into a true CAD/CAM system for Mazatrol and G-code If the customer supplies a CAD file, you can simply import it instead of spending all the time re-entering every dimension on the blueprint. This saves considerable time (as most of the time of CNC programming is entering the geometry) and error (as it is easy to misread some blue-prints, aside from just the regular type of problem). 1530 The Alameda, Suite 100 • San Jose, CA • 95126 408-249-1529 | www.mazacam.com | mazacam@mazacam.com

  5. MazaCAM CAD/CAM Matrix Edition--Programming the broad spectrum of Mazak controls from the earliest T1 to the latest Matrix • MazaCAM can convert older programs (T1, T2, T32, T-Plus, M2, M32, M-Plus, etc.) to the latest controls including the Matrix, and can convert down to most older machines. • MazaCAM can load CAD files and program them directly to Mazatrol. • MazaCAM can print, convert between controls, do file management, communicate with Mazak’s CMT, edit off-line or create new programs off-line. • Our MazaCAM Editor comes with the ability to program T1, T2, T3, T32, T-Plus, M2, M32, M-Plus, Fusion, MT, Pro-series and Matrix. 1530 The Alameda, Suite 100 • San Jose, CA • 95126 408-249-1529 | www.mazacam.com | mazacam@mazacam.com

  6. We do Normal Lathes: T1, T2, T3, T32, T+, Fusion-640T Matrix But also between all Integrex Generations: T3 Integrex Integrex (Matrix and MT-Pro) T32 Integrex Fusion-640 Integrex e-Machine (Matrix and M-Pro) And between Integrex and e-Machine (Turn vs Mill Style): Matrix Integrex Fusion-Pro Integrex Fusion 640MT Integrex Matrix e-Machine Fusion-Pro (M-Pro) e-Machine } } }

  7. MazaCAM is the only mainstream CAD/CAM system that also integrates off-line programming for Mazaks in Mazatrol, including Matrix. • Programs the Matrix • Converts between all generations of Mazaks • Program in a CAD/CAM environment. • (We call our mainstream CAD/CAM: "GeoPath“) • Create your drawings from a blueprint. • Program Mazatrol from a CAD file. • Program Mazatrol in a Mazatrol Editor. • Communicate to all Mazaks. • Print Mazatrol programs. • Mazatrol file management. • Excellent technical support. • Communicate to any CNC. • CAD/CAM outputs G-code to any CNC. • Customizable EIA post-processors. 1530 The Alameda, Suite 100 • San Jose, CA • 95126 408-249-1529 | www.mazacam.com | mazacam@mazacam.com

  8. Mazaks with Mazatrol have a definite advantage over other CNC brands. • Mazatrol programs are easier to understand because actions are designated in commonly used machinist terms, like "Drilling", "Tapping". "Pocket", "Chamfer", etc., versus G-Code is all code words. • Mazatrol programs are much shorter, often a few pages of program versus G-Code which takes hundreds or thousands of lines to do the same task.  When the operator looks at the Mazatrol program, such as to make tweaks to the program or to re-start at a certain process, or just to follow what is going on, it is far easier to find and understand the Mazatrol program. • Set-up time is reduced with easy to understand Mazatrol programs. • Mazatrol has more powerful tool data, etc. Programming in Mazatrol uses all the advantages above. But when one programs the Mazak with G-code only, one loses the Mazatrol advantages, and reduces it to the lower level of the competition's CNCs. To have this great Mazak machine with this great Mazatrol but not use it, is a sad waste: Muda*. Let’s not waste the Mazatrol advantage. 1530 The Alameda, Suite 100 • San Jose, CA • 95126 408-249-1529 | www.mazacam.com | mazacam@mazacam.com * Muda means "waste" in Japanese.

  9. Keep the Mazatrol advantage with MazaCAM • Whether you program in CAD/CAM or Mazatrol, you can maintain your advantage with MazaCAM because you can still output Mazatrol to your Mazaks. • More and more clients may demand that shops program from the clients’ CAD files. We give you the ability to program from CAD files and still keep the Mazatrol advantage. • If your shop still depends on older machines but needs to buy a newer machine, MazaCAM can handle the conversion from older machines to the newer CNCs. • Programmers don’t have to lose the Mazatrol advantage to program from CAD. 1530 The Alameda, Suite 100 • San Jose, CA • 95126 408-249-1529 | www.mazacam.com | mazacam@mazacam.com

  10. How can we help you be more productive?ONE PROGRAMMING SYSTEM FOR ALL THE CNCS IN THE SHOP • We can output Mazatrol or G-code, our G-code post-processors are very powerful and include sub-routines. • We can load CAD files and output to both Mazatrol and G-code. • We offer training to all customers at no extra cost. • Once a program has been created, it can be converted to any other Mazak machine. No matter what control. • We can program all Integrex machines (Fusion MT, Pro, Matrix). • We read many different types of Mazatrol programs into MazaCAM. • MazaCAM customers continue to purchase Mazaks because they can program them easily. 1530 The Alameda, Suite 100 • San Jose, CA • 95126 408-249-1529 | www.mazacam.com | mazacam@mazacam.com

  11. This is what Mazak Users say about us: • “MazaCAM has increased my ability to use the Mazaks in my shop. There are times I can take a program home and work with it. This saves time. There are things that are easier to do in the MazaCam than they are at the control. I currently have just one Mazak mill but we have just purchased another mill from Mazak and it will be here very soon. You could say that the MazaCAM software has made us want to own more Mazak machines. ”Anthony Castiglia, Owner, Precision Sheet Metal, Inc • “Your software has definitely affected how we use our Mazaks in particular. The software has helped us a lot with configurations, instruments and stuff. We have no problems at all. Since we got your software we have purchased five or six Mazaks. ”Nick Bustos, Stackmatch • “Using the MazaCAM software on our Mazaks has increased production. The ability to program offline helps out a lot. We can have things ready for the guys whenever the parts come up. We don’t have to spend anytime at the machine that way ”Mike Moffi, Programmer, Ace Manufacturing • “ I bought the MazaCAM software specifically to work on Mazaks. It just makes it easier because we don’t have to go to the shop floor a lot; we can do it right at our desks. ”Steve Layton, Supervisor, Franklin Electric Company • “I love the MazaCAM software. I bought it because I love the Mazak mill turn and the MazaCAM software lets us use the Mazaks a lot. The software has increased our involvement with the Mazak machines as well as the production. I barely work the machine now. I mainly keep track of the work, that’s all. It’s much easier now. ”Jun Miguel, Programmers Industry 1530 The Alameda, Suite 100 • San Jose, CA • 95126 408-249-1529 | www.mazacam.com | mazacam@mazacam.com

  12. For more information or to see a demo call us at: 408.249.1529 | 888.322.3226 Visit our web site or email us at: www.mazacam.com | mazacam@mazacam.com 1530 The Alameda, Suite 100 • San Jose, CA • 95126

More Related