1 / 10

Connecting Programer:

Connecting Programer:. FEM-IB connector is upper back side of board Labels on connector should face towards front of VME Crate:. Connecting Programer:. FEM connector is top side of board Labels on connector should face towards bottom of VME Crate:. Initialzing Programmer.

ddeming
Download Presentation

Connecting Programer:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Connecting Programer: • FEM-IB connector is upper back side of board • Labels on connector should face towards front of VME Crate:

  2. Connecting Programer: • FEM connector is top side of board • Labels on connector should face towards bottom of VME Crate:

  3. Initialzing Programmer • Under “All Programs” open Xilinx ISE Design Suite 13.1 -> Lab Tools -> Impact • Answer “No” to Automatically Create and Save Box:

  4. Initialzing Programmer • In drop down box: • For FEM-IB board select FEM_IB.ipf • For FEM board select FEM.ipf • Enter OK

  5. You should see 2 devices for FEM-IB and 4 for FEM board FEM-IB FEM

  6. Checks • Click on device • Right click and select “Get Device ID” • Should get “ReadIdcode Succeded” • If failure, then cable is backwards. Correct and repeat. • Close window, answer “NO” to “Save Project”

  7. To Program • Locate Main project file for FPGA to be programed and double click it • For the FEM-IB

  8. To Program • Answer “Yes” when windows gives the warning message. • The Xilinx package should open (Slide 9) • Scroll down to find the Configure Device (iMPACT) option and double click • A new iMPACT window should appear (Slide 10) • Select device to be programed (xcf02s) for the FEM-IB, left click to highlight and right click to get menu. • Select program. Take default options and click on OK button • Wait for operation to complete 30-60 seconds depending on device

More Related