1 / 8

SOLUTIONS

SOLUTIONS. What does that mean?. What is a solution?. Possible to have any state dissolved in any other; however,. most inorganic rxns which involve solutions have solid or gas dissolved in water, so our emphasis will be on aqueous solutions. Solution Composition [concentration].

devi
Download Presentation

SOLUTIONS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SOLUTIONS What does that mean? What is a solution? Possible to have any state dissolved in any other; however, most inorganic rxns which involve solutions have solid or gas dissolved in water, so our emphasis will be on aqueous solutions. Solution Composition [concentration] mass solute x 100 mass solution mol solute Mass % - Molarity = L solution Mole fraction of A = nA=χA For acid-base, 1 eq = mass of A or B which produces 1 mol of H+ or OH-. For redox 1 eq = quantity of oxid or red agent which will provide or accept 1 mol of e-. Normality = # equivalents nA+ nB L solution Molality = mol solute kg solvent

  2. SOLUTIONS What is the molality of a solution prepared by dissolving 18.3 g of cobalt(II) nitrate in 500. mL H2O? What is m for the ions? How would you prepare 250. mL of a 2.00 M solution of NaOH? What is the normality of a 0.500 M solution of HCl? H2SO4? Dilution • Dilution is adding solvent to decrease the concentration of a solution • The amount of solute stays the same, but the concentration decreases • Dilution Formula: Ms x Vs = Md x Vd • Describe how to prepare 100. mL of a 0.25M solution from a 2.00M stock solution

  3. Determining Concentration of an Unknown Solution The Beer-Lambert Law One way to determine an unknown concentration, is to measure the amount of light absorbed by a colored solution. A sample is placed in a spectrophotometer adjusted to absorb a specific λ of light. The amount of light transmitted or absorbed by the solution is measured (see lab handout Analysis of Food Dyes…) The amount of light absorbed is related to Beer’s Law (A = εbc) and can be compared to a calibration curve to determine the concentration of the colored substance in the sample.

  4. Note: If the original solution has been diluted multiply by the ratio (volume dil/vol. orig.). If reduced (evap) multiply by the ratio (reduced vol./orig vol.). • Example: A 50.0 mL sample containing Cr3+ ions is diluted to 250. mL and shows an absorbance of 0.256 at 415 nm. Determine the concentation of chromium(III) ions in the original 50 mL sample. 0.17M x 250.0 mL/50.0 mL = 0.85M

  5. Titration Titration is the use of a standard solution to determine the concentration of another (unknown) solution. A certain volume of one solution (standard) which is acidic or basic, is added to a known volume of a solution whose concentration is unknown (also acid or base, opposite of the standard solution). The volume of standard added is just enough to neutralize the unknown. This is determined by using an indicator. The concentration of the unknown solution can then be calculated using the equation MuVu = MsVs Example: 25.0 mL of 0.250M NaOH is titrated with 15.00mL of an acetic acid solution. MsVs ____ (0.250 M)(25.0 mL) _______________ 0.417 M Mu = = = Vu 15.0 mL

  6. Calculate the volume of 0.200 M of sulfuric acid needed to completely neutralize 10.0g of sodium bicarbonate.

  7. Solubility Rule of thumb? Why? Explained by energies of solution formation. 3 parts to solution formation: • Breaking up (expanding) the solute ∆H1 positive and higher for polar/ionic • Overcoming the intermolecular forces in (expanding)the solvent ∆H2 Also + and higher for polar/ionic • Solvent and solute interaction to form solution ∆H3 negative Enthalpy (heat) of solution ∆Hsoln = Lattice Enthalpy ∆H1 + ∆H2 + ∆H3 Heat of Solvation Illustrations Oil in water; NaCl in water; I2 in hexane Identify which in each pair would be most soluble in water: hexane or ethanol Ethanol or octanol ↑ temperature generally increases solubility for solid in liquid ↑ pressure increases solubility of gas in liquid

  8. Colligative Properties • Adding a solute to a solvent affects the properties of the solvent. • Vapor pressure is depressed • Raoult’s Law: PA = P0A x (nA/nsoln) • Distillation • Boiling Point is elevated • Freezing point is depressed • Osmotic Pressure is elevated • Osmosis Place these in order of increasing bp (all are 1.00m aq solutions): glucose, calcium chloride, hydrochloric acid, nitrous acid. "distillation." Online . Britannica Student Encyclopædia. 27  Sept.  2008  <http://student.britannica.com/eb/art-66040>.

More Related