1 / 13

Operation TCR

Operation TCR. 2 nd of July to 10 th of September 2001 More than 20 major events Events grouped by equipment group and zone affected. Niels.Schionnemann@Cern.ch. Electrical events.

devin
Download Presentation

Operation TCR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Operation TCR 2nd of July to 10th of September 2001 More than 20 major events Events grouped by equipment group and zone affected Niels.Schionnemann@Cern.ch

  2. Electrical events • 19/08 18:42: Electrical disturbance of 400 kV EDF due to storm, main PS magnet tripped. No electrical equipment switched off. • 19:15 PS running again • 19/08 21:08: Compensator 1 BE tripped due to storm. SPS and PS stopped. • 21:21 PS running again • 21:40 Meyrin filters fall out. PS still ok • 22:14 Compensator in BE ok, SPS running • 22:29 Meyrin filters ok • 20/08 00:34: Compensator 1 BE tripped due to storm. PS and SPS stopped • 1:30 PS and SPS running again Niels Schionneman ST/MO/TCR

  3. Electrical events • 20/8 06:48 Short circuit in transformer EHT3 BE • Transfo was idling but the short circuit caused an unbalance in the network and made the compensators trip. • Demi water off Prevessin and Meyrin • PS and SPS stopped • Electrical problem solved at 7:20 • Cooling PS ok at 9:20 • Cooling SPS ok at 10:20 Niels Schionneman ST/MO/TCR

  4. Electrical events • 29/8 18:47 Explosion in 18kV breaker sub-station 7 • 7 18kV breakers in the PS loop trip • The 66kV supply for the transfo SEH1 tripped. Meyrin off tension • Auto transfer switched to EOS after 5 sec • The 18kV trips due to malfunction of protection equipment/selectivity problem • PS and SPS stopped for 24h Niels Schionneman ST/MO/TCR

  5. CV events concerning PS • 3/7 14:20 Water leak alarm in PS • Demanded access but found no leak. Drains were blocked and condense water from air condition caused the water level to raise • 15:33 PS running again • 4/7 21:43 Cooling problem in 361 • MCR can not switch on main magnet due to high temperature in 361 • Ventilator in cooling tower not running on max speed • 23:43 PS running again Niels Schionneman ST/MO/TCR

  6. CV events concerning PS • 15/7 9:01 PS demi water stopped • A UPS supplying the PLCs for the demi water stations had tripped due to water infiltration • UPS bypassed and PLCs and water stations started • 11:25 PS running again • 19/8 2:43 and 7:19 Demi water station 359 stopped. PS stopped • Station stopped twice due to heavy storms. Started station manually • 3:05 and 7:39 Cooling ok Niels Schionneman ST/MO/TCR

  7. CV events concerning PS • 20/8 19:00 Demi water for TT2 stopped • No beam for SPS • No alarms received in TCR • Magnet in TT2 supplied from TOF line. To be changed • 20:20 Cooling station in 378 started again • 23/8 20:15 Demi water temperature too high in East area • Pumping station running on max • Primary water temperature at 25 degrees due to very warm weather. • Informing MCR. Situation unchanged all night Niels Schionneman ST/MO/TCR

  8. CV events concerning PS • 25/8 15:10 Pump in cooling circuit for ISOLDE exploded • ISOLDE stopped • No fluid alarms in TCR, only electrical alarm • Isolated pump and started spare pump • 15:40 Cooling ok Niels Schionneman ST/MO/TCR

  9. CV events concerning SPS • 6/7 17:45 Temperature interlock on main magnet in BA3. SPS stopped • Supply valve closed on primary side of heat exchanger • 19:38 SPS running again • 9/7 11:45 Temperature interlock on septum magnet in BA6. SPS stopped • Pump stopped by faulty pressure sensor • 12:30 SPS running again • 27/7 10:25 BA6 cooling off. SPS stopped • CV working on PLC for BA6 cooling. A faulty Siemens module caused the station to stop • 10:55 SPS running again Niels Schionneman ST/MO/TCR

  10. CV events concerning SPS • 2/8 14:27 Demi water BA81 stopped due to water leak. No beam for North area • Access to machine given but leak is not found • Manages to start pumps and refill continuously • 15:39 North area beam back on • 5/8 Compensator tripped due to missing cooling in BA3. SPS Stopped • No alarms in TCR • Cooling stopped due to problem with the PLC • 19:40 SPS running again • 10/8 20:40 Same problem as above • 21:30 SPS running again Niels Schionneman ST/MO/TCR

  11. CV events concerning SPS • 27/8 4:20 Cooling for septum magnet BA2 stopped. SPS stopped • No alarms in the TCR. Pump restarted from TCR • 4:22 SPS running again Niels Schionneman ST/MO/TCR

  12. CV events concerning SPS • 2/9 4:31 + 3/9 4:56 Demi water BA3 stopped. No alarms in TCR • Problem seen when compensator in BB3 tripped • SPS stopped for 1h each time • Cooling stopped due to error in PLC • 3/9 23:59 Demi water for CAV2+RF1 BB3 stopped • SPS stopped for 3.5h • Cooling stopped due to electrical problem on pump for CAV2 circuit. Pumps started in forced mode. Niels Schionneman ST/MO/TCR

  13. Various events • 14/7-15/7 RTserver crashes several times • Different zones at Meyrin without supervision for various periods. • Fire brigade instructed to do rounds and keep a close eye on the synoptic. • 16/7 Bugs found and fixed by IN. Situation back to normal. • 27/8 3:55 Vacuum sector valve closed TS1 and TS2. SPS stopped. • 4:00 Valve in TS1 opened. OK for SPS • 4:10 Valve in TS2 closes • 4:12 Valve in TS2 opened. OK for SPS Niels Schionneman ST/MO/TCR

More Related