210 likes | 389 Views
ATCoach Tactical Edition PAR Simulator (APARS) US AIR FORCE TRAINING SUPERVISOR & AIR TRAFFIC CONTROLLER ORIENTATION CLS2004.A.0-Intro. OBJECTIVES. This course provides instruction on the following: Identification and description of the hardware components.
E N D
ATCoach Tactical Edition PAR Simulator (APARS) US AIR FORCE TRAINING SUPERVISOR & AIR TRAFFIC CONTROLLER ORIENTATION CLS2004.A.0-Intro
OBJECTIVES • This course provides instruction on the following: • Identification and description of the hardware components. • Installation of the hardware components. • Power on, Log-In/Out, and Power off procedures. • User manual format. • Description of the software. • Data management of ATCoach files: • Function Keys Config (IQAK) File, .atcinit File, & Radar Data File • Site File • Scenario Files • Aircraft Model File • Exercise Setup: • Standalone • Playback • Error Check • Exercise Manipulation: • Commands & Menus
ATCoach Tactical Edition PAR Simulator (APARS) HARDWARE DESCRIPTION CLS2004.A.0-001.1
LESSON OBJECTIVE • Action: • Identify hardware components. • Condition: • In a classroom environment. • Standards: • In accordance with (IAW) the Manufacturer’s User Manual and the ATCoachTactical Edition PAR Simulator User Manual.
Hardware Components • The ATCoach Tactical Edition PAR Simulator (APARS) consists of the following: • Sun Blade 150 Workstation(s) • 550 MHz UltraSPARC IIi Processor • 256 MB PCI33 168-pin DIMMs Main Memory • Internal disk 40 GB, 7200-rpm Enhance IDE disk drive • Internal 48x-speed CD-Rom • Internal 1.44 MB floppy • External tape drive • 10/100 BaseT Ethernet • AC power 100-120; 220-240 VAC, 47-63 Hz • Operating 40° F to 95° F, 10% to 90% relative humidity • Nonoperating -4° F to 150° F • Dimensions & Weight • Height 4.6” • Width 18.0” • Depth 17.6” • Weight 26.9lb.
Hardware Components • The ATCoach Tactical Edition PAR Simulator (APARS) consists of the following: • Sun Blade 150 Workstation(s) • Sun PGX64 24-bit, 2-D graphics on the motherboard • 20.1” LCD Monitor
Hardware Components • The ATCoach Tactical Edition PAR Simulator (APARS) consists of the following: • Headset interface control unit(s); Override capability. • Plantronics H51N Supra Headsets; Monaural with noise-canceling microphone. • Plantronics SHS 1890 push-to-talk amplifiers. • Speakers.
Hardware Components • The ATCoach Tactical Edition PAR Simulator (APARS) consists of the following: • 10/100 Auto-sensing hub. • 56k V90 Modem. • External Tape Drive.
Hardware Components • The ATCoach Tactical Edition PAR Simulator (APARS) consists of the following: • Power conditioner with 30 minute power backup capability. • Surge protectors.
Optional 2nd Position Hardware Components • The ATCoach AN/TPN-18 Radar Simulator (APARS) complete: (Less Keyboard, Mouse & Cables)
ATCoach Tactical Edition PAR Simulator (APARS) PRESENTATION COMPLETE
ATCoach Tactical Edition PAR Simulator (APARS) HARDWARE INSTALLATION CLS2004.A.0-001.2
LESSON OBJECTIVE • Action: • Install/Configure hardware components. • Condition: • In a classroom environment. • Standards: • In accordance with (IAW) the Manufacturer’s User Manual and the ATCoach Tactical Edition PAR Simulator User Manual.
Hardware Installation - Prep • Step One: • Unpack the Sun Blade 150 Workstation(s). raptor Optional Position talon Primary Position • NOTE: If the Sun Blades are not labeled you must power them on to determine which computer is which. (You must wait to do this.) • Step Two: • Unpack the Monitor(s). • Step Three: • Unpack the Modem. (Primary Position). • Step Four: • Unpack the Headset Interface Unit(s).
Hardware Installation - Prep • Step Five: • Unpack the Headsets and Push-to Talk Amplifiers. • Step Six: • Unpack the Speakers. • Step Seven: • Unpack the Hub. • Step Eight: • Unpack the Tape Drive. (Primary Position). • Step Nine: • Unpack the UPS and Surge Protectors.
IEEE 1394 Connectors Not Used SCSI: Connect to Tape Drive USB: Connect to Keyboard USB: Connect to Mouse LAN: Connect to Hub (Position One) VGA Video: Connect to Monitor Serial: Connect to Modem Power: Connect to Surge Protector Hardware Installation - Cables • Sun Blade 150 - talon, Monitor, & Peripherals Audio (Voice Recognition) Connect to Headset Interface Unit • Primary position.
Audio (Voice Recognition) Connect to Headset Interface Unit IEEE 1394 Connectors Not Used USB: Connect to Keyboard VGA Video: Connect to Monitor Power: Connect to Surge Protector LAN: Connect to Hub (Position Two) USB: Connect to Mouse Hardware Installation - Cables • Sun Blade 150 - raptor, Monitor, & Peripherals • Optional position. • Must be networked to talon to obtain mounted files. • Voice recognition.
Hardware Installation - Cables • Sun Blade 150 – talon & raptor, Monitor, & Peripherals Audio (Voice Recognition) Connect to Headset Interface Unit
Audio (Output) Connect to Speakers Microphone Connector Not Used Hardware Installation - Cables • Sun Blade 150 - talon & raptor, Monitor, & Peripherals
raptor talon Hardware Components • Auxiliary Equipment & Peripherals (Less Keyboard & Mouse)
ATCoach Tactical Edition PAR Simulator (APARS) CLASS COMPLETE CLS2004.A.0-001