1 / 18

System Introduction New Board Description

Introduction to IP LDK-100/300/300E Digital Key Telephone System. System Introduction New Board Description. LCOB. LDK-50/100 MB Iss: Rev:. MPB. LCOB. LCOB. LCOB. LDK-50/100 MB Iss: Rev:. ED 3667. ED 3667. 1. System Introduction. System Overall Configuration.

diza
Download Presentation

System Introduction New Board Description

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction to IP LDK-100/300/300EDigital Key Telephone System • System Introduction • New Board Description

  2. LCOB LDK-50/100 MB Iss: Rev: MPB LCOB LCOB LCOB LDK-50/100 MB Iss: Rev: ED 3667 ED 3667 1. System Introduction System Overall Configuration VMIB (Voice Announcement Service) LCO WTIB PSTN STIB : So RF Base DECT VoIP DTIB IP SLIB E1 RS232C G4 Fax ISDN Phone PRI Video Phone (ISDN Based) ISDN Printer Voice Mail Billing/PMS PC Admin BRI Voice Networking(PRI) PFTU Battery Ext MOH Ext. Paging Loud Bell (Relay) Voice Mail DKTU SLT LAN:10M Ethernet Remote Services Gateway PSTN Internet PC Attendant PC Phone PC Admin CTI/TAPI Server Voice Mail Billing /PMS DKTU SLT PC WAN WAN Data Network area Voice Networking (VoIP) Router Hub (10/100M) IP Phone 1/16

  3. CO/Extension Boards -. LCOB : Analog CO. Interface B/D (4 ports) -. PRIB : ISDN PRI Board (30 channels) -. BRIB/BRIBE : ISDN BRI Board (8 channels) -. STIB/STIBE : ISDN S/T Interface (8 channels) -. DTIB : Digital KTU Interface B/D(12,24 ports) -. SLIB24/48 : Single Line Tel Interface B/D(6 ports) -. DSIB : 6 Digital KTU and 6 SLT Interface B/D(12 ports) -. SLIBII : Single Line Tel Interface B/D(12 ports) -. WTIB : DECT Interface B/D (4Cell +Opt 4Cell) -. WTIU : DECT option B/D (4 Cell ) -. SLIB2E : 12 port SLT Interface B/D -. VOIB/VOIBE: VOIP Interface B/D(8 chs/24 chs) -. CLCOB4/8 : 4/8 ports CO Interface B/D with CID function -. VMIB/VMIBE: Voice Mail I/F B/D (8 chs, max.10Hr) Terminal -. Digital KTU : KD/E, LKD, LDP-7000 Series DSS, Phone Box -. SLT, Fax, Modem -. Wireless Terminal GDC-330H,335H,345H 1. System Introduction System Components LDK-300/300E KSU -. KSU : Key Service Unit -. MPB : Main Processor Board -. MPBE for IP LDK-300E -. PSU : 350W, 250W -. PSU-D : 320W -. Universal Slot : 9 EA Optional boards -. DTRU : DTMF Receiver Unit(2 chs) -. CMU : Call Metering Unit(16KHz,12PR,50PR) -. RGU5 : Ring Generator Unit(External) -. PFTU : Power Failure Transfer Unit (6 circuits) -. DTRUII : DTMF Receiver Unit (4 chs) -. CPTU A/B : Call Progress Tone detection Unit (2 chs) -. MODU : Modem Unit (33.6kbps) -. RGU : Ring Generator Unit ( Int 25Hz) -. DTRU4 : DTMF receiver unit ( 4 chs) -. RAU : Relay Alarm Unit -. CPTU4 : Call Progress Tone detection Unit (4 chs) -. CMU4 : Call Metering Unit (4 chs) -. VOIU/VOIUE: VOIP Interface Unit (2 chs/12 chs) -. RPTU : RePeaTer unit for DKTU -. SDMU32/SDMU_A : SDRAM module -. CIDU4/8 : Caller ID unit(4/8 chs)-DTMF/FSK Type -. VCEU/VCEUE : Voice Channel Expansion Unit (4 chs) -. FMEU2 : Flash Memory Expansion Unit (5 hours) 2/16

  4. LDK-100 CO/Extension Boards All kinds of CO & Extension card used in LDK-300 [LDK-100 Only] BRIBE : 2 Basic Rate Interface BRIUE : 2 Basic Rate Interface NPRIB : 1 Primary Rate Interface KSU -. KSU : Key Service Unit -. MPB : Main Processor Board -. PSU : 120W -. PSU-D : 320W -. Universal Slot : 6 EA Optional boards All kinds of option boards used in LDK-300 [LDK-100 Only] SIU :1 Serial port LANU : 10 Base-T Ethernet port SMEMU : 2Mbytes SRAM Expansion DMEMU : Software Download PLLU : for ISDN Board Terminal -. Digital KTU : KD/E, LKD, LDP-7000 Series DSS, Phone Box -. SLT, Fax, Modem, TAD -. Wireless Terminal: GDC-330H,335H,345H 1. System Introduction System Components 3/16

  5. 1. System Introduction System Max. Call Capacity -. Medium / Large Size Digital KTS -. Maximum Capacity -. VMIB LDK-100 : Max. 16 Channels, 20 Hours(2) LDK-300/300E : Max. 24 Channels, 30 Hours(3) -. WTIB LDK-100 : Max 16 Cells(2) LDK-300/300E : Max 24 Cells(3) 4/16

  6. 1. System Introduction System Resources & Capacity 5/16

  7. Board Unit CLCOB 4/8 VOIBE VMIBE / AAIBE MPBE LMUE PSU-D CIDU 4/8 VOIUE VCEUE PMUE 2. New Board Description New Board/Unit 6/16

  8. 2. New Board Description CLCOB4/8 • Description • CLCOB4 provides 4 Loop start CO line interface. • CLCOB8 provides 8 Loop start CO line interface. • CLCOB4/8 can be installed on the universal slot No.1-9 of any KSU. • Maximum 200 analog lines limit Analog CO interface ports. • Pulse Dial function is not applicable in CLCOB8. • CLCOB4/8 are implemented to accommodate CIDU4/8 option board. • Add-on boards : • -.CLCOB4 : DTRU4, CPTU4-C, CIDU4(CID + CMU-50PR) • -.CLCOB8 : DTRU4, CPTU4-C, CIDU8(CIDU + CMU-50PR) Switching Functions LED Indications-CLCOB4/8 7/16

  9. 2. New Board Description CIDU4/8 • Description • There are two types of CIDU4/8, FSK-CIDU4/8 and DTMF-CIDU4/8. • FSK/DTMF CIDU4/8 detects Caller ID signal that are supplied from the CO line interface. • FSK/DTMF CIDU4/8 interface contains Microprocessor, CID Unit in the Memory, • Call Metering Unit (CMU-50PR). • FSK/DTMF CIDU4/8 is used as an Option Board in CLCOB4/8 and cannot be used alone. • Only when CIDU4/8 is inserted to CLOB4/8, the MPB recognizes CLOB4/8 board • as IPP board. • FSK-CIDU4/8 enables CID function in case of On-hook(Type I) and Off-hook(Type II). • DTMF-CIDU4/8 enables only for On-hook(Type I). Switching Function LED Indications 8/16

  10. 2. New Board Description VOIBE/VOIUE • Description • The VOIBE/VOIUE card can be installed in LDK-300 and LDK-100. • Its main job is to provide the Ethernet interface for S/W applications and VOIP feature with • optional VOIUE daughter. • VOIB is installed on the universal slot No. 1-9 of KSU except the slot No. 9 of 1st KSU. • The number of ports are expanded to 24 channel comparing with the existing VOIB. • VOIBE has twelve(12) ports basically and VOIUE has additional twelve(12) • ports. Switching Functions LED Indications 9/16

  11. 2. New Board Description VMIBE/AAIBE • Description • VMIBE/AAIBE provides system announcement, ACD/UCD announcement, and User Greeting. • Voice quality has been improved comparing with VMIB/VMIB2/AAIB. • Enhanced features are implemented • (Message forwarding and message rewinding while listening message) • Add-on boards: • -. VMIBE : VCEUE, FMEU2 • -. AAIBE : VCEUE. Switching Functions LED Indications 10/16

  12. / AAIBE 2. New Board Description VCEUE/FMEU2 • Description • VCEUE: Provides additional 4 VMIBE channels. • FMEU2: Provides additional 5 hours recording time of VMIB2 and VMIBE. • The voice recording capacity of VMIBE and AAIBE • 1. VMIBE • 5 hours (System greeting : 30 minutes, User greeting : 4 hours and 30 minutes) • 2. VMIBE with FMEU2 • 10 hours (System greeting : 30 minutes, User greeting : 9 hours and 30 minutes) • 3. AAIBE • 13 minutes (System greeting : 10 minutes, User greeting : 3 minutes) Compatibility of VMIB/VMIB2/VMIBE with optional boards 11/16

  13. 2. New Board Description MPBE/PMUE • Description • The 32MB SDRAM is used for software downloading and additional features. • Before installing the MPBE, you must install the PMUE. • The MPBE must be used for expanding from LDK-300 system(300 ports) to LDK-300 • Expansion system(600 ports) and installed on the MPB slot of the 1st KSU. • To operate LDK-300 Expansion system, connect the CN 1 of MPBE to the CN1 of LMUE • with Link cable attaching ferrite core. • MPBE doesn’t have one external page port and one external MOH port comparing with MPB • The LMUE has one external page port and one external MOH port. • Add-on Boards: PMUE,MODU • Description • The PMUE has a program for system control, administration, and call processing. • The PMUE is mounted on the MPBE. • The PMUE has 8M bytes of four 70ns 16Mbit flash ROMs which is available of software • downloading by BDM(Board Debug Module) tool, ISDN line or LAN port. 12/16

  14. 2. New Board Description MPBE/PMUE Various switches and connector Functions Function of SW3 LED Indications 13/16

  15. 2. New Board Description LMUE • Description • The LMUE is used to connect master system to expansion system for IP LDK-300E • The LMUE has one external page port and one external MOH port. • The LMUE is installed on the MPB slot of the 4th KSU. • To operate LDK-300 Expansion system, connect the CN 1 of MPBE • to CN 1 of LMUE by Link Cable having ferrite core. Switches and connectors Function 14/16

  16. 2. New Board Description LMUE 15/16

  17. 2. New Board Description PSU-D • Description • LDK-300 PSU-D is installed on the left first and second slot of the mother board. • Two PSU-D can be inserted • In case two PSU-D are inserted, the power is provided by the method of load sharing. • If one is failed, another one supplies the power with the system. PSU-D Specification Power Supply Capacity 16/16

  18. Thank you

More Related