210 likes | 331 Views
PALM-3000 Status and the 3388-actuator Xinetics Deformable Mirror. A.H. Bouchez, R.G. Dekany, J.R. Angione, C. Baranec, K. Bui, R.S. Burruss, J.R. Crepp, E.E. Croner, J.L. Cromer, S.R. Guiwits, D.D.S. Hale, J.R. Henning, D. Palmer, J.E. Roberts, M. Troy, T.N. Truong, J. Zolkower
E N D
PALM-3000 Status and the3388-actuator Xinetics Deformable Mirror A.H. Bouchez, R.G. Dekany, J.R. Angione, C. Baranec, K. Bui,R.S. Burruss, J.R. Crepp, E.E. Croner, J.L. Cromer, S.R. Guiwits,D.D.S. Hale, J.R. Henning, D. Palmer, J.E. Roberts,M. Troy, T.N. Truong, J. Zolkower 2009 CfAO Fall Retreat 11/7/2009
The PALM-3000 upgrade The Palomar AO system • 241 actuators, 16x16 sampling, 2 kHz max frame rate • Typical perf.: 190 nm RMS WFE • Instruments: • PHARO nIR imager & spectrometer • Project 1640 nIR coronagraphic IFS • SWIFT visible IFS • Visitor instruments Palomar AO & SWIFT installed on the 5.1m Hale telescope The PALM-3000 upgrade • 3388 active actuator deformable mirror • Wavefront sensor with up to 63x63 pupil sampling • Wavefront reconstructor computer to run at up to 2 kHz • Expected performance: • 95 nm RMS WFE in median conditions (r0=9.2 cm) • 79 nm RMS WFE in 75th percentile conditions (r0=11.0 cm)
Marois et al., Science 322, 2008 Oppenheimer et al., AJ 679, 2008 2.5” Brown et al., ApJ 639, 2006 Science Drivers • Galactic • Hot, young exo-Jupiter studies • Faint debris disks • Mass/luminosity of pre-main sequence binaries Require high contrast in the near-infrared • Solar system • Giant planet satellite surface geology • Multiplicity of TNOs and asteroids • Surface minerologyof large asteroids Require high Strehl in the visible PALM-3000 will deliver >50% Strehl in V band! 3
P3K-GPI comparison How is PALM-3000 different from GPI? • Budget: $9M, including science instrument and calibration WFS • Reusing many components of the current AO system • Planning optimization after delivery (less algorithm development, modeling) • Optimized for brighter stars • Contrast of ~10-7 at 1” around V=7 stars • Wider search area • dark hole extends to 2.1” at 1.65 µm • Testbed for coronagraphic techniques • APLC + IFS, [Vortex, band-limited] + imager • Visible light AO capability • Northern hemisphere 4
The Project 1640 Instrument • PI: Ben Oppenheimer, American Museum of Natural History • Apodized Lyot coronagraph with a low-resolution (/=30) J-H band integral field spectrograph back-end. • Post-coronagraphic calibration wavefront sensor being developed by JPL. • Expected flux ratio reached at 1.0” radius from bright stars (3 in 1 hr): • PALMAO 8 x 10-4 • P3K 5 x 10-6 • P3K + JPL Cal 2 x 10-7 Raw spectra of a broadband calibration source Project 1640 in the lab at AMNH 5
DM3388 OAP1 TTM OAP2 DM241 FM1 Science Instrument Volume FM3 SSM2 FM2 FM4 SSM1 HOWFS & ACam Optical Relay • Reuses existing bench, off-axis parabolas, steering mirrors, tip/tilt mirror, science dichroics, DM (DM241). Retain current science focus position • New HOWFS, high-order DM (DM3388), Acquisition Camera and Stimulus • Passes 120” Ø field • DM3388 located at pupil, 10.5° AOI • DM241 located at +742 m conjugate, 16.0 ° AOI • Requires 4 fold mirrors (meets 50% transmission requirement, incl. telescope) • Acquisition camera rides on HOWFS focus stage
Optical Relay Performance Optical Performance • On-axis aberrations corrected by DMs (astigmatism from dichroic, alignment errors) • Field aberrations 30” off axis are ~32 nm RMS • Woofer DM at non-pupil conjugate leads to focal plane distortion, on same scale as tip/tilt anisoplanatism Mechanical Tolerances • <5 mas image drift over 300s in the focal plane • <5% misregistration of finest subaperture in 300s in pupil plane • Requires both careful mechanical design and active, open-loop flexure compensation J band spot diagrams at science focus, using DMs to correct on-axis aberrations Image shift induced by applying corrections for these errors at +742 m conjugate
High-Order Deformable Mirror • Manufactured by Xinetics using a new actuator structure • Development funded by an SBIR grant • World’s highest actuator count deformable mirror • 66 x 66 = 4356 actuators on 1.8 mm pitch • We control 3388 on 112 mm • Very, very late Acceptance testing at Xinetics Inc., Aug. 2009
DM Actuator Structure Actuator Structure • Actuators are machined from monolithic blocks of PNM • 6x6 mosaic of 11x11 actuator blocks • 2mm thick Zerodur facesheet • Stroke ~1.4 µm without face sheet, uniform to 9% RMS. Prior to face sheet bonding
Deformable Mirror Testing Zygo surface map of a portion of the mirror, with every 4th actuator poked • All actuators are functional • Influence functions are uniform • With face sheet, measured stroke is 1.1-1.2 µm
Deformable Mirror Status • Unpowered surface figure: 0.03 µm RMS, 0.5 µm P-V • Mirror is currently being silver coated. • Expect to receive it in Pasadena in 2-3 weeks.
DM Electronics and Cabling Implementation issues • Driver electronics dissipate ~4 kW; mounted on telescope due to cable length constraints • Cables require redesign to meet observatory operational requirements
High Order Wavefront Sensor • Shack-Hartmann design with selectable 8, 16, 32 or 63 samples across the pupil • CCD50 detector (128x128 pixels) in SciMeasure Lil’ Joe camera • Uses a tilted spherical collimator and cylindrical lens to match mircrolenses to DM3388 actuators at 10.5º AOI See Baranec, Proc. SPIE 7015, 2008.
HOWFS microlens arrays • Images of the microlens arrays in the assembled HOWFS arrays taken with a CMOS alignment camera.
HOWFS alignment • Spot patterns recorded with the CCD50 camera • Preliminary alignment:
HOWFS Subaperture Alignment In the 63x63 subaperture mode, the pupil will be shifted with respect to the detector to preserve Fried geometry. In the other modes, we will use use modal control. 63 63 32 32 16 16 8 8
Wavefront Processor Computer Strategy • Despite reconstruction problem being 250 times larger than for present-day systems… 8192 slopes x 3631 actuators, vs. 512 slopes x 243 actuators • Perform full matrix multiplication reconstruction • Parallelize, and use off-the-shelf Graphics Processor Units for computation • House GPUs in a remote cluster of low-cost desktop PCs (in observatory computer room) Implementation • VMM calculations performed on 16 Nvidia GPUs in 8 PCs • Advantages: Low cost, simple software implementation, rapid upgrade cycle • PC 0 provides the interface, scheduling, and control of the cluster • PC 9 is dedicated to telemetry recording (1 Tb RAID, Berkeley DB) • Communication provided by a Quadrics switch (latency measured to be 19 µs) • All running Real-Time Linux • Publish/subscribe environment
Servo Control Architecture Flexible control system Modes: • Control DM3388 & TTM, offload to DM241 • Split modes btw. DM3388 & DM241, offload to TTM • Fixed DM241 (good seeing only) • Calibration WFS input to centroid offsets & DM3388 positions
Future Plans PALM-3000 Testbed • Demonstrate performance of all new components before taking Palomar AO system offline • Includes all PALM-3000 components except DM241, final optics (eg. off-axis parabolas, stimulus), and steering mirror mounts • Low-cost monochromatic source and refractive optics • Testbed integration this month (Nov. 2009) • Goal is to demonstrate closed-loop operation at 2 kHz by April 2010 Future Milestones • Project 1640 Cal WFS integrated with Palomar AO Dec. 2009 • PALM-3000 pre-ship review planned for June 2010 • First light in February 2011