1 / 8

MTF SLIT

MTF SLIT. COMPONENTS. Adjusting Blocks and Mounting Plate. Steel Blocks. Clamps. Shims. Slide Blocks. Two Blocks of Oil Hardening Steel are separated by shims 100um thick. This forms the slit for MFT measurements.

doli
Download Presentation

MTF SLIT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MTF SLIT COMPONENTS Adjusting Blocks and Mounting Plate Steel Blocks Clamps Shims Slide Blocks

  2. Two Blocks of Oil Hardening Steel are separated by shims 100um thick. This forms the slit for MFT measurements. The blocks are secured via two sets of clamps made from aluminum blocks and stainless steel bolts

  3. The steel blocks need to be adjustable so the slit can be centered under the XRAY beam. To allow adjustment, the bocks have a groove which allow them to move along a ridge on the slide blocks.

  4. The actual adjustment is made by turning the left and right adjusting screws. A dial indicator is mounted on one of the adjusting blocks to determine the amount of movement.

  5. The steel blocks are pulled together with the stainless steel shims separating them by 100 microns. The blocks are clamped loosely at the bottom. Then the sliding blocks are placed in the grooves of the steel blocks. The dial indicator is bolted to one of the adjusting blocks. Adjusting screws are placed in the threaded adjusting blocks. The adjusting blocks are then bolted to the underside of the mounting plate.

  6. The mounting plate ready for assembly. The mounting plate is placed over top of steel blocks.

  7. The top clamps are set in place and tightened.

More Related