1 / 39

AGEC 220

2. Introduction. Factor-factor decision: The manager must decide which combinations of inputs to use in order to achieve the firm's economic objective.Cost minimization: The factor-factor decision involves finding the least-cost combination of inputs, from the different input combinations possible

domani
Download Presentation

AGEC 220

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. 1

    2. 2 Introduction Factor-factor decision: The manager must decide which combinations of inputs to use in order to achieve the firm’s economic objective. Cost minimization: The factor-factor decision involves finding the least-cost combination of inputs, from the different input combinations possible, that will produce a given level of output.

    3. 3 Firm produces a single product Firm has two variable inputs; other are fixed (The production function can be expressed as: Y = ƒ(X1, X2 | X3 ……. Xn) ) Firm is a price taker. Assumptions

    4. 4 Physical Relationships Production Surface: describes the “hill” of increased production obtained as we increase use of the variable inputs. A three dimension production surface; (1) Each elevation on the “hill” has the same level of output (such as line A, B, and C); (2) Production level C > B > A.

    5. 5 Isoquant: line indicating all combinations of two variable inputs that will produce a given, or constant, level of output. How do you derive an isoquant? Example: (1) Daily farm combine grain (X1) and hay (X2) for his herd’s feed ration. Different combinations that can produced the same level of output (Y = 11000 lbs of milk) Physical Relationships

    6. 6 distance between the isoquant and the origin indicates the level of output, or height of the production surface. closer the isoquant is to the origin, the lower the level of output. The farther away from the origin, the higher the level of output. Isoquants can never intersect. Characteristics of Isoquants

    7. 7 Marginal Rate of Substitution (MRS): rate at which one variable input can physically substituted for another variable input in the physical production process calculated by the dividing the change in the replaced input (? replaced) by the change in the added input (? added). Marginal Rate of Substitution (MRS)

    8. 8 X1 -- the variable input being replaced X2 -- the variable input being added MRSX2X1 = ?X1 / ?X2 . Marginal Rate of Substitution (MRS)

    9. 9 X2 -- the variable input being replaced X1 -- the variable input being added MRSX1X2 = ?X2 / ?X1. Marginal Rate of Substitution (MRS)

    10. 10 Input being replaced: vertical axis Input being added: horizontal axis. Slope of the isoquant at any point is equal to MRS at that point.

    11. 11 Calculate the MRS for the dairy example. Note: |MRSX2X1| > 1, X2 is good substitute for X1. |MRSX2X1| < 1, X2 is less efficient substitute for X1.

    12. 12 (1) Perfect Substitutability: It occurs when one unit of an input can be exchanged for another input on a consistent basis (or unchanged ratios). MRSX2X1 = ?X1 / ?X2 = constant. Possible Rates of Input Substitution

    13. 13 (2) Imperfect Substitutability: one unit of an input can be exchanged for another input on a inconsistent basis (or changed ratios). Possible Rates of Input Substitution

    14. 14 (3) Fixed proportions (or Perfect complementarity): inputs must be used in a fixed ratio. Note: The substitutability is zero. Possible Rates of Input Substitution

    15. 15 Economic Relationships Isocost line: line indicating all combinations of two variable inputs that can be purchased for a given, or same level of expenditure. TE = (PX1* X1) + (PX2* X2) (1) Example: Daily farmer TE = $100; Price of grain: PX1=$0.20/lb; Price of hay: PX2 = $0.10/lb. Question: how many units of each input could be purchase?

    16. 16 Isocost Curve

    17. 17 The closer to the origin, the lower the level of total expenditure and the fewer inputs can be purchased; the farther away from the origin the higher the level of total expenditure and the more inputs can be purchased. Inverse Price Ratio(IPR): slope of the isocost line is - PX2 /PX1; the price of the input on the horizontal axis divided by the price of the input on the vertical axis. indicates the relative value of the input, or how they substitute for one another economically. Isocost Curves

    18. 18 Price Changes If the price of the one of the variable input changes, the slope of the isocost line also changes. If PX2 ?, TE0 ? TE1 If PX2 ?, TE0 ? TE2

    19. 19 If PX1 ?, TE0 ? TE1 If PX1 ?, TE0 ? TE2 Price Changes

    20. 20 (1) The end points of the isocost line show how many units of the variable input could be purchased if all the expenditure were spend on one input. (2) A change in total outlay causes a parallel shift in the isocost line. (3) A change in one input price causes the isocost line to rotate around the intersection of the isocost line and the axis of the other input. (4) A reduction in the use of one input is necessary to increase use of the other input. (5) The slope of the isocost, also called IPR, is the price of the input on the horizontal axis divided by the price of the input on the vertical axis Isocost Summary

    21. 21 Factor-Factor Decision Two equivalent approaches (Numerical and Graphical) can be used to determined the least-cost combination of inputs.

    22. 22 Manager equates the the MRS (the slope of the isoquant) to the inverse price ratio (the slope of the isocost) to determine the least-cost combination of inputs. That is, MRSX2X1 = - PX2 /PX1 Numerical Approach

    23. 23 The least-cost combination of inputs is located at the point of tangency between the isocost line and the isoquant. (Recall that at the point of tangency of two curves, the slope of two curves are equal to each other.) (1) Isoquant is known, and the slope of isocost curve -PX2 /PX1 (2) Parallel move the isocost curve and find TE1. TE0 is too lower to reach the isoquant (optimal Y); TE2 is too higher b/c it has the same effect as TE1. Graphical Approach

    24. 24 Expansion of Production Level Isocline: is a line connecting the least-cost combinations of inputs for all output levels at a specific price ratio; shows how, at a given price ratio, inputs should be added as production increases. Expansion path: is a line connecting least-cost combinations of inputs for each level of output at “the specific price ratio the manager believes relevant.”

    25. 25 Product-Product Decision situations in which the firm produces multiple products from a given set of resources.

    26. 26 The firm produces two products The firm has a fixed set of resources The firm is a price taker (both inputs and outputs) Question: How to mathematically express the above assumptions as a production function? Assumptions

    27. 27 The product-product decision involves determining how the two products substitute for one another in the firm’s production process. Because the firm will act as a rational producer with fixed amounts of inputs, the objective is to combine outputs produced in the proportion that results in higher revenue, given a resource constraint. Product-Product Decision

    28. 28 Physical Relationships Production possibilities frontier (PPF): curve depicting all the combinations of two products that can be produced using a given level of inputs (or expenditure).

    29. 29 Example: A farmer with the following inputs and output: Input (X): Nitrogen fertilizer Output 1 (Y1): Corn Output 2 (Y2): Grain Sorghum Step 1: Define TPP curve for each output; Step 2: Derive PPF by specifying the level of input use. Note: The relationship that exists between the two crops is considered competitive. Deriving a Production Possabilities Frontier

    30. 30 Economic convention places the output that is being replaced on the vertical axis, and the output being added on the horizontal axis. The distance from origin is an indication of the level of input being used. PPF

    31. 31 Marginal Rate of Product Substitution (MRPS): describes the rate at which one output must be decreased as production of the other product is increased, and, by definition, is the slope of the PPF; Calculated by dividing the change in the product being replaced by the change in the product being added. Marginal Rate of Product Substitution (MRPS)

    32. 32 Isorevenue Line Isorevenue line: is a line depicting all combinations of two products that will generate a given, or same, level of total revenue. TR = (PY1* Y1) + (PY2* Y2) Example: Corn: PY1 = $2.50/bu.; Sorghum: PY2 = $5.00/bu. Question: If TR = $150, how many units of each crop will be sold?

    33. 33 distance from the origin from the origin indicates the level of revenue. The closer to the origin, the lower the TR; the farther away from the origin, the higher the TR. slope of isorevenue line is - PY2/PY1, also referred to as the Inverse Price Ratio (IPR). end points of the isorevenue line show how many units of each output would have to be sold if all the TR came from selling only that output. Isorevenue Curve

    34. 34 Price Changes A change in an output price causes the isorevenue line to rotate around the intersection of the isorevenue line and axis of the other output. Question: If price of one product increase, what will happen to isorevenue curve?

    35. 35 Product-Product Decision Two equivalent approaches can be used to determine the revenue maximizing combination of a given level of input use: numerical and graphical approaches.

    36. 36 The manager equates the MRPS to IPR to determine the output combination that maximize revenue. MRPSY2Y1 = - PY2 /PY1 Numerical (mathematical) Approach

    37. 37 The revenue maximizing combination of product is located at the point of tangency between the isorevenue line and the PPF, or the point where the slopes of the two curves are equal to each other. Graphical Approach

    38. 38 Product Price Increase: PY2 increases to P?Y2 , and PY1 remain constant ?? TR (slope - PY2 /PY1) shifts to TR? (slope - P?Y2 /PY1) ? Producers use more resources to produce Y2 and less to produce Y1 until the slope of TR? equals to the slope of PPF. Product Price Decrease: Product Price Decrease: PY2 decreases to P?Y2 , and PY1 remain constant ?? TR (slope - PY2 /PY1) shifts to TR? (slope - P?Y2 /PY1) ? Producers use less resources to produce Y2 and more to produce Y1 until the slope of TR? equals to the slope of PPF. Price Changes

    39. 39 Competitive Relationship Complementary Relationship An Increase in one product brings about an increase in the level of production of the other. Supplementary Relationship The amount of one product can be increased without increasing or decreasing the amount of the other product. Joint Product It occurs when the production of one product actually results in the production of another. Possible Product-Product Relationships

    40. 40 Expansion path: the line connecting the combination of products that will maximize revenue for any given level of resources, at the price ratio the manager considers relevant and probable. Expansion Path

More Related