1 / 2

UCC28063 versus UCC28061

UCC28063 versus UCC28061. SUMMARY OF MAJOR IMPROVEMENTS Reduced hysteresis currents on high-voltage sense inputs Variable gain for small- and large-signal transients to have fast response but minimize audible noise Special dropout-handling to avoid recovery peaks & noise

dulcea
Download Presentation

UCC28063 versus UCC28061

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. UCC28063 versus UCC28061 • SUMMARY OF MAJOR IMPROVEMENTS • Reduced hysteresis currents on high-voltage sense inputs • Variable gain for small- and large-signal transients to have fast response but minimize audible noise • Special dropout-handling to avoid recovery peaks & noise • Revised OVP levels and actions on VSENSE input • Single-phase condition reduces CS threshold to 0.167V • Short and Open protection on TSET input; Open on CS • Internal gate-drive cross-conduction minimized • Leading and trailing-edge blanking on CS and ZCD signals • Lower trans-conductance allows smaller COMP values • CARRY-OVER FROM UCC28061 • Dual-interleaved TM boost-PFC • ZCD-winding inputs and thresholds • UVLO: VCCON and VCCOFF thresholds • No AC-input range-change (same as is -061) • AC-line zero-crossing distortion correction • VREF voltage trim and current capability • TSET gain factor setting and trim • VSENSE enable threshold & HVSEN thresholds • COMP offset and clamp levels • GDA & GDB drive capability and speed • VINAC brownout 1.4V threshold and 440ms delay • Phase-fail detection and 12ms delay • PHB single-phase on and off thresholds • PWMCNTL function and drive capability

  2. UCC28060 to UCC28061 to UCC28063

More Related