1 / 185

New Mexico FFA

New Mexico FFA. Agricultural Mechanics Career Development Event General Shop. Adjustable Wrench. Used to loosen or tighten hexagon and square nuts. This wrench adjusts to fit a variety of sizes. Air Pressure Hose.

eagan-mcknight
Download Presentation

New Mexico FFA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. New Mexico FFA Agricultural Mechanics Career Development Event General Shop

  2. Adjustable Wrench • Used to loosen or tighten hexagon and square nuts. This wrench adjusts to fit a variety of sizes.

  3. Air Pressure Hose • A thick wall small diameter hose that carries compressed air from the tank or piping to the tool.

  4. Air Pressure-Type Grease Gun • Used to supply high volumes of grease at high pressures.

  5. Airless Spray Gun • A spray gun that may be used without the need for compressed air to propel the paint.

  6. All Thread Rod • A metal rod (usually 36” long)threaded from one end to the other, generally cut to a specific length.

  7. Allen or Setscrew Wrench • A piece of hexagon stock with a 90 degree angle on one end that is used to tighten or loosen female, hexagon, hollow type set screws.

  8. Anvil • Used to shape, bend, rivet, or cut steel. This tool provides a hard surface for hammering.

  9. Aviation Tin Snips • Used to cut compound curves and intricate designs out of thin sheet metal.

  10. Double Bit Axe • Has 2 cutting edges. Used also to cut small trees, trim trees, and logs, and trimming tops.

  11. Single Bit Axe • Used for building and construction work. This tool has a single cutting edge and one flat edge.

  12. Hand Axe • Used for cutting small limbs and brush and sharpening stakes. The tool has one sharp edge and one flat edge for driving stakes.

  13. Ball Pein or Machinst Hammer • Has various uses by the mechanic or machinist. The hammer has a round crowned hammering face at one end and a fall at the other.

  14. Barrel Bolt • Generally used as a latch mechanism to keep doors closed.

  15. Bench Brush • Used to clean benches, stools, and machinery.

  16. Blacksmith’s Hammer • Used to work and mold hot and cold metal. The end has a blunt wedge shape at one end and the hammering surface at the other end is square.

  17. Bolt Clipper or Cutter • Used to cut bolts, round stock, reinforcing bar, wire and chain.

  18. Bolt Snap • Used to attach chain, latch doors etc.

  19. Box End Wrench • Used to tighten or loosen hex head nuts and bolts, completely surrounds the nut which will lessen slippage.

  20. “C” Clamp • Used for clamping wood when gluing and holding metal in position while tacking or welding.

  21. Cape Chisel • Used for cutting keyways and grooves because it has a narrower cutting edge than the flat chisel.

  22. Center Punch When struck with a hammer it leaves small indentation where a drill bit will catch and start a hole when drilling in metal.

  23. Chain Hoist • A device used to lift heavy objects by working an endless chain through two or more chain sheaves.

  24. Chuck Key • Used to tighten the gear type chuck for a drill or drill press.

  25. Clevis or Shackle • Used to fasten an implement or material to various objects such as a draw bar or to a cable for pulling.

  26. Closed “S” Hook • Generally used to connect two items such as chain where the S is permanently closed.

  27. Combination End Wrench • Widely used tool and is popular because the wrench has the advantage of having both the open and box end on the same wrench.

  28. Come-Along • Used to hoist and pull objects.

  29. Crow Bar • Used for moving stones and prying where leverage is required. The tool has a taper on one end and a blunt chisel on the other end, and is 4-5 ft. long.

  30. Cup Brush • Used for cleaning corrosion/rust from metal.

  31. Die

  32. Die Stock

  33. Tap and Die Set

  34. Disc Grinder • Used to remove slag burrs and smooth welds on large metal surfaces.

  35. Dividers • Commonly used to transfer a specific measurement from one surface to another.

  36. File Card • Small brush with wire bristles used to clean the teeth of files.

  37. Double Cut File • Used to remove metal faster than single cut files. A double cut file produces a rough surface and requires heavy pressure when filing.

  38. Single Cut File • Is usually used to produce a smooth surface finish. Light pressure should be used when filing with the single-cut file.

  39. Half RoundFile • Used to remove metal or wood inside large holes and on concave circular surfaces.

  40. Round File • Used to remove metal or wood from holes.

  41. Taper or Three Square File • Used for sharpening hand saws.

  42. Hose Clamp • Device used to secure hoses to their fittings.

  43. Wire Hose Clamp • A wire clamp used to attach hoses to radiators or engine water pumps.

  44. Hydraulic Jack • Low setting jack generally used indoors where it can be easily moved.

  45. Mending Brace • Small rigid metal strap with pre drilled holes that are used to attach/splice materials together.

  46. Measuring Wheel • Used to measure linear distance between two points.

  47. Mixing Paddle • Used to stir paint or other liquids with an electric drill.

  48. Nibbler • Used to cut light gauge metals, especially useful when cutting curves or arcs.

  49. Nut Driver • Used to turn small hex nuts and bolts, faster and easier than a wrench.

  50. Offset Screwdriver • Used where space is restricted and the screw is difficult to reach. Bits are available in standard or phillips types.

More Related