1 / 52

New Mexico FFA

New Mexico FFA. Agricultural Mechanics Career Development Event Plumbing. Boiler Drain. Used to release waste liquids from some type of storage vessel such as a hot water heater. Chain Wrench. Used to hold pipe and other round objects and for tightening or loosening of pipe and fittings.

skyler-pierce
Download Presentation

New Mexico FFA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. New Mexico FFA Agricultural Mechanics Career Development Event Plumbing

  2. Boiler Drain • Used to release waste liquids from some type of storage vessel such as a hot water heater.

  3. Chain Wrench • Used to hold pipe and other round objects and for tightening or loosening of pipe and fittings.

  4. Check Valve • A check valve allows liquids to only flow in one direction.

  5. Clear Vinyl Tubing • Clear Vinyl tubing is used to carry fluids that are under high pressure, very flexible which eliminates fittings.

  6. Compression Repair Coupling • Should be used to make temporary repairs on PVC and metal pipes where a break or leak occurs.

  7. Copper Hot Water Heater Plumbing Pipe. • Used to attach a hot water heater to inlet and outlet valves.

  8. Copper Tubing Cutter Used to cut and de-burr copper tubing.

  9. Drum Auger • Quite often referred to as a plumbers snake. May be electric or hand powered and is used to clear stopped drains.

  10. Flange • A rim or collar used to hold a pipe or shaft in place.

  11. Float Valve • Used for controlling the water level in a storage reservoir.

  12. High Pressure Tubing • Used to prevent hose rupture on implements such as sprayer and power washers.

  13. Hose Bib • A threaded male end faucet also known as a wall hydrant

  14. Lawn Faucet/Sillcock • A threaded female end faucet generally used on the exterior wall of a building.

  15. Gate Valve • A valve in which the line-closing element is a gate that is raised or lowered to regulate flow

  16. Ball Valve • A valve that uses a ball to seal against the seat

  17. Globe or Stop Valve • A valve in which the closing element is a sphere, or a flat or rounded gasket, which is moved into or onto a round port

  18. “O” Ring • An “O” ring is used to form a seal between two metal parts.

  19. Pipe Plug • Closes off the end of a pipe similar to a cap but fits inside the pipe. May also be used on a flat surface such as an oil pan, engine block.

  20. Pipe Cap • Closes off the end of a pipe by threading on to the outside of the pipe.

  21. Pipe Thread Compound • A putty applied to pipe threads before fittings are tightened. Aids in forming a water tight seal.

  22. Pipe Vise • Used to hold pipe securely when cutting, threading, or reaming.

  23. Plastic Pipe • Black in color and comes in rolls. Size may vary and it is joined together using clamps and fittings. Relatively inexpensive and used when covering a great distance.

  24. Plastic/PVC Pipe Cutter • A plier like tool designed to cut plastic and PVC pipe.

  25. Pipe Dies • Used to thread a variety of sizes of pipe manually, uses a ratcheting handle.

  26. Pressure Switch • An electric control mechanism that activates a pump when water levels drop in a storage reservoir. Also used to activate air compressors.

  27. Propane Torch • Generally used to heat copper tubing for sweating purposes.

  28. PVC Coupling • A glue on fitting used to connect two pieces of pipe.

  29. PVC Elbow • May be a 45 degree or 90 degree, used to form a corner in pipe.

  30. PVC Pipe • Rigid plastic pipe, generally white in color, used for a variety of plumbing purposes. Fast glue based assembly.

  31. Rigid Copper Tubing • May be used for water and some gases. It is normally connected with sweat on fittings.

  32. Stop and Waste Valve • This type of valve allows you to turn off the flow of liquid and drain the system.

  33. Street Ell or elbow • Used to connect two different sizes of pipe while making a forty five or ninety degree turn. Generally found in black and galvanized pipe.

  34. Submersible Pump • An electric powered pump that is placed inside well casing to pump water to the surface.

  35. Sucker Rod • Rods used to connect a wind mill to the pump at the bottom of the well casing, or a pump jack to a pump in the casing.

  36. Sump Pump • A pump that is used to remove water that has accumulated in some type of pit.

  37. Sweat On Copper Tubing Fittings • Copper fittings that are connected using heat and solder rather than threads

  38. Tee • Used to connect three joints of pipe. May be found in black, galvanized or PVC.

  39. Teflon Tape • A thin, flexible tape attached that seals threads to form a water or gas tight seal. Used in place of pipe thread compound.

  40. Thermcouple • A sensor for measuring temperatures. Used in hot water heaters and furnaces to activate the heating elements in gas units.

  41. Union • Most commonly used to connect two gas lines or pipes together, may be black pipe or galvanized.

More Related