1 / 6

Dissolve 67.58g FeCl 3 .6H 2 O in 250ml of 2M HCl.

Ferrofluids 1. Dissolve 67.58g FeCl 3 .6H 2 O in 250ml of 2M HCl. Dissolve 39.76g FeCl 2 .4H 2 O in 100ml of 2M HCl. Modified from Berger et al, Journal of Chemical Education, 1999, 26, 7, 943-948. Ferrofluids 2. 1M FeCl 3 should be used within one week of preparation.

eara
Download Presentation

Dissolve 67.58g FeCl 3 .6H 2 O in 250ml of 2M HCl.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ferrofluids 1 Dissolve 67.58g FeCl3.6H2O in 250ml of 2M HCl. Dissolve 39.76g FeCl2.4H2O in 100ml of 2M HCl. Modified from Berger et al, Journal of Chemical Education, 1999, 26, 7, 943-948

  2. Ferrofluids 2 1M FeCl3 should be used within one week of preparation. 2M FeCl2 should be used within one week of preparation.

  3. Ferrofluids 3 Combine 3ml of FeCl2 solution and 12ml of FeCl3 solution and fill a burette with 150ml of 0.7M ammonium hydroxide solution. Add ammonia very slowly whilst stirring. A black precipitate of magnetite will form.

  4. Ferrofluids 4 After addition is complete, stop stirring and use a strong magnet (Nd2Fe12B) to settle the black precipitate to the bottom of the flask. Decant off the water and add fresh water. Rinse the precipitate and again decant off the water. Repeat three times to remove excess ammonia.

  5. Ferrofluids 5 Transfer the viscous liquid to a weighing boat using a little extra water if necessary. Use a magnet on the base of the weighing boat to remove excess water. Add 24ml of tetramethylammonium hydroxide (25% solution) and stir with a glass rod

  6. Ferrofluids 6 Hold a magnet on the base of the weighing boat and let the solid settle to the bottom. Decant off any excess liquid to leave a very viscous black liquid. The viscous liquid should form spikes if a magnet is held underneath the weighing boat. You may need to adjust the amount of water.

More Related