1 / 14

Paydirt Getting Started

Paydirt Getting Started. Agenda. Installing the software Digitizer Sentinel SuperPro Lock/Key/Dongle Setting up the Digitizer What information is out there Menu overview Typical Workflow Scale Reference Points Data Types. Installing the Software. Sentinel SuperPro www.setupmykey.com

ednabell
Download Presentation

Paydirt Getting Started

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Paydirt Getting Started

  2. Agenda • Installing the software • Digitizer • Sentinel SuperPro Lock/Key/Dongle • Setting up the Digitizer • What information is out there • Menu overview • Typical Workflow • Scale • Reference Points • Data Types

  3. Installing the Software • Sentinel SuperPro • www.setupmykey.com • v7.6.3 • GTCO Digitizer • www.gtco.com

  4. Setting up the Digitizer

  5. Sources of Information • CD • Support/Shared • Support/TMLS • Documentation/Sitework • Documentation/Terramodel

  6. Other Sources • ftp://ftp2.trimble.com/pub/tmsupport/PAYDIRT/ • www.trimble.com

  7. Menu Overview • Software Demo • File • Edit • View • Reports • Tools • Window • Help

  8. Typical Workflow • Start the project • Digitize/Import Surface Data • Contours • Sloping lines • Elevation Points /Boreholes • Digitize/Import Deduction Data • Subgrade Adjustments • Pads • Digitize/Import Areas • AOI’s • Reports

  9. Scale • Always use known distance if digitizing • Scale can make large $$$$ errors • Check your data • Using a known distance • Use Math Tools or Terramodel • Setup a shortcut to Math Tools. • 3 programs in one • Paydirt Sitework, Terramodel, and Math Tools

  10. Reference Points • Use two points that are visable on all sheets • Large distance apart • If two sheets with a match line use two common points near the match line. • If three or more sheets look at the instructions on ftp://ftp2.trimble.com/pub/tmsupport/PAYDIRT/

  11. Data Types • Most used • Contours • Sloping Lines • Subgrade adjustment • Pads • AOI’s • Rarely used • Elevation Points / Boreholes • Sloping Areas • Cut Stakes and Control Points

  12. Build Confidence • Use the Tutorial to: • Test your Digitizing Skills • Test your Tiff Take-off Skills • Test your CAD Import Skills • Compare the results from all three to see if they are allowable. • Be artistic and try to get solutions for • over excavation • Layback slopes • Use the reports to see what you are doing • 3D Views and Cross Sections

  13. Remember you are just building a SURFACE to compare to another for Cut, Fill, or Cut and Fill volumes. • Use the reports to visualize if you are achieving your intended results.

  14. Review Tutorial Project • Data Types • Surfaces • Validation • Reports

More Related