SGX Installation Guide page 3 License Upgrade Guide page 13

1. NeoAccel SGX Installation GuideDear Customer:We are pleased to provide you with our training presentation for our SSL VPN-Plus installing and license configuration to help you with your deployment.--The NeoAccel Support Team

2. SGX Installation Guide page 3 License Upgrade Guide page 13 Table of Contents

3. NeoAccel SSL VPN-Plus™ SGX Installation Guide

4. Prerequisites to Get Started • SSL VPN-Plus SGX Appliance(s) • SGX-800 • SGX-1200 • SGX-2400 • A Desktop or Laptop connected to same switch as the SGX appliance • Management Console • Require JRE 1.4.2 or above on administrator’s PC • SSL VPN-Plus Access Terminals • WAT: IE 5.0 & above, Firefox, Safari, NetScape • QAT: Windows 2000 & above • PHAT: Windows 2000 & Above, WinCE 5.0 & above Red Hat 9.0, Red Hat EL 3, Knoppix, Debian, MAC OSX 10.3, 10.4, 10.5

5. Powering ON the device • Connect the power cable. Connect network cable to eth0 Eth0: 192.168.10.230 SGX800 Eth0: 192.168.10.230 SGX1200 Eth0: 192.168.10.230 SGX2400

6. Connecting to the Gateway • Power on the SGX appliance • Connect a desktop to same switch the SGX is connected to OR use a cross over cable to directly connect to eth0 port on SGX • Add one additional IP address to your desktop, say 192.168.10.200 • If ping is allowed in network, try ping to 192.168.10.230.

7. Access Management Console Open the default browser on your machine and visit the following URL to open the SSL VPN-Plus Management Console https://192.168.10.230/sslvpn-plus/nmc Default credentials are admin/admin. If your desktop does not have Java 1.4.2 or above, it will redirect you to download Java on your machine.

8. Networking Setup • Go to INTERFACE screen and change the IP address as per your network • If you want to connection the SSL VPN-Plus appliance in dual ARM mode • Select eth1 as “private network” • Say apply to apply changes • Uncheck “single ARM mode” for neoeth0 • Say apply to apply changes • For any other routing changes, please create routers from ROUTE screen

9. Licensing Setup • NeoAccel runs an online license server to provide license to customers • You need SSN (Software Serial Number) and password to get a license from license server • To get a license of SSL VPN-Plus, open management console and go to LICENSE screen. • Follow the instructions on screen to get/update license • Please refer to attached “Licensing guide” for more details.

10. Internal Workstation Internal Server Internal Network External Firewall eth1 Internet Router eth0 SSL VPN-Plus Gateway Internet Internal Workstation Internal Server Internal Network External Firewall eth1 Internet Router SSL VPN-Plus Gateway Internet Deployment Options Single ARM Mode in DMZ Parallel to Firewall

11. Internal Workstation Internal Workstation Internal Server Internal Server Internal Network Internal Network External Firewall External Firewall Firewall: DMZ eth1 Firewall: DMZ eth1 eth0 SSL VPN-Plus Gateway Internet Router Internet Router Internet Internet eth0 SSL VPN-Plus Gateway Deployment Options Internal DMZ External DMZ

12. Access SSL VPN-Plus Portal • Open URL: https://<WAN side IP address of gateway machine>/sslvpn-plus/ • Example: https://vpn.corporate.net/sslvpn-plus/

13. NeoAccel SSL VPN-Plus License Upgrade Guide

14. SSL VPN-Plus Licensing • Licensing based upon • Number of days • Maximum concurrent users • SSL VPN-Plus features • Two types of licenses • Registered: Variable parameters • Evaluation: 30 days, max 25 users • Global license server: • https://utils.sslvpn-plus.net/sslvpn-plus/users/ • License management through management console

15. Prerequisites • You need the Software Serial Number (SSN) and password to access NeoAccel License Server • The SSN no. and password are specified on the one page main document you have got with the appliance. • If you need any help with licensing write to license@neoaccel.com or call Technical Support at • +1.408.436.1000 • To get the license you need Internet connectivity from your desktop from where you are logged on to NeoAccel management Console.

16. #1: Open Management Console Login into Management console

17. #2: Visit License Management Screen Go to License management screen. If license has expired, a warning message will be shown

18. #3: Update License Click on update button to update license Enter your SSN No. and click OK to generate license request.

19. #4: License Request Generated Click on “copy to Clipboard” to copy the license request string displayed in the control Click on “Open License Server to go to NeoAccel License Server

20. #5: Visit License Server A new browser window is opened in the default browser. If you have Firefox set as default browser, please copy the URL in the address bar and use Internet Explorer to open the license server page. Enter your SSN and password to enter license server

21. #6: License Request Posting Page You need to copy the license request from management console here.

22. #7: Post License Request Copy the license request from management console to license server page. Click on submit button to generate license key.

23. #8: License Key is Generated This is your license key which you need to copy to management console screen.

24. #9: Apply License Key Copy the license key from license server page to management console. Click Ok button to apply the license

25. #10: License is Updated Updated license information is displayed here.

26. Contact NeoAccel LICENSE SUPPORT   email: license@neoaccel.com phone: 408.436.1000 TECHNICAL SUPPORT   email: support@neoaccel.com phone: 408.436.1000 CORPORATE HEADQUARTERS NeoAccel, Inc. 4340 Stevens Creek Blvd, Suite 275 San Jose, CA 95129 USA TEL: +1 408 274 8000 FAX: +1 408 274 8044 EMAIL info@neoaccel.com