1 / 5

TBE 2730

TBE 2730. Routing. Dial Plan. Dial Plan Analysis Form Dialed String Total Length Call Type Switch routes off: First digit dialed Length of digits dialed Type Attd = attendant or operator Dac = Direct access to trunk group (TAC on Trunk group form) Extension

eldon
Download Presentation

TBE 2730

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TBE 2730 Routing

  2. Dial Plan • Dial Plan Analysis Form • Dialed String • Total Length • Call Type • Switch routes off: • First digit dialed • Length of digits dialed • Type • Attd = attendant or operator • Dac = Direct access to trunk group (TAC on Trunk group form) • Extension • Fac = Feature access codes form • Command: - Change Dialplan Analysis

  3. ARS Tables • ARS (Automatic Route Selection) Analysis • Table that tells switch how to route calls based on digits dialed • Dialed String – digits (assumed that 9 has already been dialed) • Total min. – minimum # of digits to route on (1 – Max.) • Total max. – maximum # of digits to route on (Min. – 28) • Rte pat. – Route Pattern 1 – 254 or deny to block call. • Call type – emergency, operator, international • Fnpa – foreign number plan area (toll calls) • Hnpa – home number plan area (local calls) • Svcl – service call (911) • Affects billing in SMDR • Command = Change ars analysis #

  4. Routing Tables • ARS (Automatic Route Selection) Digit conversion • Converts digits that are specifically dialed • Matching pattern – digits • Minimum • Maximum • Delete • Replacement String • Net – ARS/AAR • Conv – allow more conversions or no more conversions • ANI required • Command = Change ars digit-conversion # • Route Pattern table • Group number – trunk group to route call out • Can overflow to 6 different groups • FRL • Delete digits • Insert digits • Defaults • Can only change not add • Command = Change route-pattern #

  5. Routing Tables • AAR (Automatic Alternate Routing Analysis • Just like ARS except used for on-net routing over private network • Dial different access code digit and point to AAR from FAC table • Routing Commands • List ars analysis – shows digits and routes • List ars digit-conversion – shows and digit manipulations • List ars route-chosen (digits) – shows what route a call will take. Assume that 9 has already been dialed. • List aar route-chosen (digits) – shows what on-net route a call will take. Assume aar access digit has been dialed (8) in our case.

More Related