Isolation Trip Timer

1. www.lingona.com.au • Isolation Trip Timer • The LSLITT Isolation Trip Timing module from Lingona is 12/24VDC device that is designed to time delay shutdown of an electronic functional battery master isolation switch. When the key switch is turned to the OFF position ( loss of ignition supply ), the Isolation Trip module will begin time shutdown delay for a chosen time period before controlling the output isolation signal to disengage an electronic shut down functional battery master isolation switch. The LSLITT has an emergency stop activated shutdown application after a 30 sec delay shut down to ensure the engine is shut down before the isolation trip function is activated. • The Isolation Trip Timer kit includes- • LSLITT 12/24VDC operating control module (used for dual voltage 12 or 24 volt DC application ). • Note- the external relay required ( recommended HELLA 3062 for 24V application ) is not included. Isolation Trip Timing Module Installation Wiring Instructions Main Power Relay BATT IGN 12/24 V DC Key C/B Pos Power Supply Off Ignition Switch MACHINE SIDE OF Battery Isolator 12/24 V DC 3-WH 1-RD IGN Input BATT 10A Max C/B 5-BR 7-PU AUTO E-STOP S/DOWN n/a Optional Emergency Stop 8-OR Emergency Stop instant shutdown. Connect pins 5 & 6 through a normally closed contact for instant emergency stop shut down. N/C emergency stop contact system for instant isolation shutdown if emergency stops are applied. If not required connect these 2 x wires in pins 5 and 6 ( brown and green ) together. 6-GN n/a 2-BK AUX OUTPUT GND 4-YL Hella 3062 Relay 24v application Isolation Trip Timer Battery Isolator Lucas Shunt contacts Ground / Earth Connection Timing Selection DIP SW Settings S1- 1 min S2- 5 min S3- 10 min S4- 15 min C/Breaker, Ign Switch, emergency stop, Relay Not Inc 4 Distributed By Locksafe Industrial Safety Equipment