“Client-side DWDM”: A model for next-gen Baltimore region optical fanout

1. “Client-side DWDM”: A model for next-gen Baltimore region optical fanout Dan Magorian Director of Engineering and Operations MidAtlantic Crossroads (MAX) Presentation to Joint Techs, Fermilab July 17, 2007

2. Here’s the usual optical fanout nonstarter situation at most places • Almost all RONs have dwdm systems, either hard-provisioned with jumpers or with ROADMs. • Hardly any campuses have dwdm systems, but many are fiber-rich. • So most campuses figure that will bolt dark fiber to lambdas to connect RON lambdas to high-bandwidth researchers. • If any actually materialize on their campus as real demand with “check in hand”. • A few realize this many not scale and are thinking about white light switches to conserve fiber. • When they think about dwdm systems to carry lambdas to edge, cost usually prohibitive, given fiber resources and lack of perceived need for many dwdm system features.

3. So the Baltimore region wasn’t much different from anyone else • Actual “check in hand” researcher 10G demand to JHU, UMBC, & others was uncertain until recently. • Community had been well served by MAX & Internet2 high-performance layer 3 transit services. No one in Baltimore or DC had yet joined NLR. • Tho MAX has been fanning out NLR lambdas across the region for other projects and customers for years. • But recently, Teraflow testbed & other projects appeared with actual needs for 10G lambdas to Balt researchers • Also, growing demand from less well-heeled esearcher projects for vlans over shared 10G lambdas, similar to NLR’s Framenet service. • So, suddenly Balt institutions had to get their act together.

4. Luckily, had resources needed for this • BERnet (Baltimore Educational Region network) has long history of good forum for horse trading assets and working mutual deals between 7 participants: state net, university net, libraries, 4 universities. • Many other regions have similar forums, but this level of cooperation actually rather uncommon in Mid-Atlantic, so BERnet frequently touted as good cooperative model. • Had just built cooperative dwdm regional ring year before, run by Univ System MD, and all 7 participants already had dark fiber lit with 1310 to two main pop locations. • MAX was already in midst of procuring 3rd generation unified dwdm system to replace 2 fragmented metro rings built 2000-2003 (more on that next time). • State net was willing to contribute a fiber spur to Baltimore no longer used in production net for research needs.

5. High-level BERnetdiagram, inc comingMIT-MAX RON-RON interconnection.(Will mean at least 4R&E paths to get 10G north: I2, NLR, Awave,and MIT) MIT dwdm Albany MIT dwdm Boston MIT dwdm NYC Lambdas to Europe MIT dwdm BALT BERnet dwdm 6 St Paul NLR and I2 lambdas BERnet Participants BERnet Participants MAX dwdm MCLN MAX dwdm CLPK

6. BERnet Regional Diagram inc new MAX dwdm JHMI MIT 300 Lex. JHU 40 wavelength MUX w ITU XFP’s Client Side Path UMBC 660 Redwood 6 St. Paul 40 wavelength Amplified Line Side Path One Transponder Pair to Pay for and Provision End to End MCLN NLR & I2 College Park

7. Already BERnet had talked through L3 routed vs L2 bypass tradeoffs • Not news to anyone in this community, same most places: • High-end researcher demand approximates circuits with persistent large flows needing low latency. • National R&E backbones like ESnet have moved to accommodate that by building circuit switching for top flows • Upgrading campus L3 infrastructures (the “regular path”) to accommodate this emerging demand involves very expensive router and switch replacement. • Usual interim approach is for campuses to “special case” researchers with L2 bypass infrastructure until greateroverall demand warrants 10G end-to-end for everyone.

8. Originally, plan was to extend USM dwdm system down to DC • But new MAX dwdm wouldn’t be same system, would have created OEO and need for two transponder pairs, • Didn’t want to use “alien waves” across core: • problems with no demarc • need for color coordination across diverse systems. • Wanted participants to understand longer term cost implications of 1 vs 2 transponder pairs per lambda. • One transponder pair instead of two means half the incremental cost to add 10 G channels ($32K vs. $64K ea). Over $1M save if all 40 populated. • Transponders dominate costs over long term! • Unlike state nets, were within distance, didn’t need OEO for regen.

9. So instead, I talked BERnet participants into DIY idea of “client dwdm”. • Everyone is familiar with full-featured dwdm system features. Also lots of vendors selling low-cost bare-bones dwdm systems, eg Ekinops, JDSU, etc • 3rd alternative: “do it yourself” minimal dwdm components (that aren’t even systems) are perfect for regional fanout from full-featured systems. • So one XFP or SFP goes in client (trib) pluggable ports of dwdm system, and other side goes in IT or researcher ethernet switch or even in 10G nic. Also switch to switch. • Instead of $30-60k dwdm cost per chassis for participants, cost is only $22k for 40 lambda filter sets + $6k per “colored” Finisar or equivalent XFP pair. 1G or 2.5G SFPs under $1k/pr Also $15k/pop for newly released Aegis OLM-8000 optical power monitors from 99/1 taps to view 8 fibers. • Lower costs mean even small folks can play!

10. “Client” and “Line” dwdm provisioning example Client side: instead of “normal” 1310 optic, uses “colored” dwdm XFP pair on an assigned wavelength 40 km reach $6K JHU 660 Redwood 6 St. Paul Line side: Transponder Pair makes the 185 km reach with Amps and holds the client XFP $32K MCLN NLR & I2 College Park

11. Many commodity 40 channel 2U C band passive parallel filters are available. We chose Bookham who OEM components for Adva and others’ dwdm systems, and had them packaged for us. We needed 99/1 tap ports for optical power monitors. Beware: many dwdm system vendors mark up filters significantly. Also, some still 32 channel. Could have also done 10-channel, not much cheaper.

12. DWDM DWDM DWDM DWDM DWDM DWDM More “Client Dwdm” examples XFP pairs on an assigned wavelengths on 40 channel dwdm filters (40 km reach $6K). Red lambda is to DC, blue to NYC, green local to UMBC JHU switch 6 St. Paul 660 Redwood 300 W Lexington UMBC All each participant fiber needs is filter pair plus one optical power monitor at each pop, not full dwdm chassis

13. This “client dwdm” approach has lots of advantages in many situations • Good interim approach where have fiber and need to do more than just put 1310 over it, but don’t have budget or need for full or even bare-bones dwdm system. • Easy to migrate existing 1310 services onto dwdm colored sfps and xfps. Doesn’t take lot of optical expertise. • Optical power monitors are very important for snmp data to mrtg power levels. Remember, while some lambdas are from campus IT switches, some researcher lambdas from their switches or nics may not be visible to campus IT at all. • Because one end in full-featured dwdm xpdr client port, still have benefit of support of 10 G WANphy, SONET/SDH, OTU2 for international partners, Fiber Channel (DR sites), GMPLS enable control plane and Dynamic Provisioning for DCS service. • Main caveat: Cisco and Ciena proprietary pluggable optics! • Other folks considering using it, eg NOAA & NASA/GSFC.

14. Deploying it in August, will let you know how it comes out!Will forward info on filters or optical power monitors we used to anyone interested.Thanks! magorian@maxgigapop.net