1 / 7

Common Ice-maker Problems and solutions

A-1 Appliance is producing ice-maker repairing tips to fix things and enjoy the benefits of your machine once again.

elinaphilip
Download Presentation

Common Ice-maker Problems and solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Is your Ice-maker taking a longer time to produce ice ?? • Observe the symptoms • of malfunction and try DIY repairing • method before calling a repairman. • Symptoms may take time to • develop and recur if the machine • is not fixed the first time. • Most icemakers are • temperature-sensitive, and as the • freezer temperature rises and falls, • this sensitivity can cause symptoms • to be intermittent.

  2. Five main Symptoms • Ice cubes taste or smell bad. • water supply problems. • The ice is "slabbing;" cubes are freezing together • into blocks in the bin. • "Hollow" cubes. The ice cubes are "shelling," • or not freezing completely before the harvest cycle • tries to eject them from the mold. • The fill tube keeps filling with ice and blocking • the flow of fill water. • The icemaker is not working at all, or is • producing ice very slowly. http://www.a-1appliance.com

  3. : Food Blocking Ice Harvest : http://www.a-1appliance.com

  4. SLABBING This generally occurs when the ice is not ejecting from the ice mold properly. If there are cubes left in the ice mold after a harvest cycle, the new water fill will overfill the mold for the next batch.

  5. Ice Mold Deposits Low water pressure can also cause the valve to leak, Sometimes badly enough to overfill or overflow the ice mold. However, this particular problem usually shows up as an ice-blocked fill tube. http://www.a-1appliance.com

  6. Blocked (Frozen) Fill Tube http://www.a-1appliance.com

  7. Contact A-1 Appliance Parts : Address:11208 S. Memorial Pkwy, Suite G,Huntsville, AL   35803 : Toll-Free Phone: 1-800-841-0312Local: (256) 883-3211Fax: (256) 883-3220 Website : www.a-1appliance.com

More Related