1 / 28

Creating Logo from Polymer Clay "Youth Futures" Workshop - Tiberias

Creating Logo from Polymer Clay "Youth Futures" Workshop - Tiberias. Created by Andrei Sleptzov Youth Futures Trustee, Tiberias. Clay of Logo's Colors, Cold Enamel Tools: Rolling Pin, Cutters, Tools for Clay, Metal Pin, E7000 Glue Molds: Heart, Magen David. Preparation of Pin's Base.

ellis
Download Presentation

Creating Logo from Polymer Clay "Youth Futures" Workshop - Tiberias

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Creating Logo from Polymer Clay "Youth Futures" Workshop - Tiberias Created by Andrei Sleptzov Youth Futures Trustee, Tiberias

  2. Clay of Logo's Colors, Cold Enamel Tools: Rolling Pin, Cutters, Tools for Clay, Metal Pin, E7000 Glue Molds: Heart, Magen David

  3. Preparation of Pin's Base Work Similar to Putty

  4. Kneading Process

  5. Note: Base is Made of Light-Colored Background

  6. Flattening Background

  7. Cut Base

  8. Remove Excess Clay

  9. Scrape Base off of Surface

  10. Repeat for other Colors of Logo

  11. Cut Hearts of Different Colors

  12. Remove Excess Material (Save for Later Use)

  13. Shapes Created

  14. Make all Shapes Before Next Step

  15. Arrange Hearts on Light Background

  16. Heart to Heart

  17. Cut Around Logo Pattern

  18. Remove Excess

  19. Round Corners with Tool

  20. 2 Examples - White and Gray Backgrounds

  21. Bake at 130 Degrees Celsius for 25 Minutes and Allow to Cool

  22. Burnish with Electric Tool

  23. Burnish with Electric Tool

  24. Fill with Cold Enamel and Dry for 24 Hours. Finish by Gluing Pin. January 2008 "Youth Futures" Tiberias

More Related