1 / 8

Select the emulator you want to use Here I have selected the SD XDS 510 USB emulator

Select the emulator you want to use Here I have selected the SD XDS 510 USB emulator Click on “Add” below. Specify the connection name. Make sure the address is selected in the Connection Properties TAB. Click finish. You will find the board you created appear on the left

elmer
Download Presentation

Select the emulator you want to use Here I have selected the SD XDS 510 USB emulator

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Select the emulator you want to use Here I have selected the SD XDS 510 USB emulator Click on “Add” below

  2. Specify the connection name Make sure the address is selected in the Connection Properties TAB Click finish

  3. You will find the board you created appear on the left The list of processors will appear on right Select F2800 Select Add below

  4. You’ll see this box appear Select the gel file location and hit OK

  5. Now the board and processor have been created. Hit Save and Quit

More Related