1 / 9

S12X Full-Emulator: Pictures of the Emulator Hardware

S12X Full-Emulator: Pictures of the Emulator Hardware. S12X CPU-Module. TARGET CONNECTORS – ALL S12X SIGNALS AVAILABLE FOR EASY PROBING. TARGET CONNECTORS – ALL S12X SIGNALS AVAILABLE FOR EASY PROBING. JUMPERS – TO SELECT S12X VOLTAGES FROM POD OR TARGET.

toshi
Download Presentation

S12X Full-Emulator: Pictures of the Emulator Hardware

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. S12X Full-Emulator:Pictures of the Emulator Hardware

  2. S12X CPU-Module TARGET CONNECTORS – ALL S12X SIGNALS AVAILABLE FOR EASY PROBING TARGET CONNECTORS – ALL S12X SIGNALS AVAILABLE FOR EASY PROBING JUMPERS – TO SELECT S12X VOLTAGES FROM POD OR TARGET S12X CPU 2nd SILICON – (BLUEFIN2) WITH MANY S12X BUG FIXES LED INDI- CATORS PIN SOCKETS FOR THE CRYSTAL AND PLL- FILTER ANALOG SIGNALS TO BE NEXT TO THE S12X CPU S12X SIGNAL NAMES MARKINGS

  3. S12X Emulator-Motherboard Port-Replacement-Unit (PRU) FPGA AND ICs – RECREATES PORTS A, B, C, D, E & K 8Mbit - Unlimited HARDWARE BREAKPOINTS (on the Print-Side) HOUSE-KEEPER COMMUNICATION CONTROLLER SYSTEM 2MByte EMULATION RAM CONNECTORS TO TRACE BOARD EMULATOR MAIN FPGA POWER SUPPLY CONNE- CTOR PC COMMUN- ICATION CONNE- CTOR CONNE- CTORS TO THE CPU- MODULE AND THE TARGET 2MByte SHADOW RAM (on the Print-Side) HIGH SPEED CONNE- CTORS TO THE CPU- MODULE 3.3V VOLTAGE REGUL- ATOR

  4. New Trace Boardfor the S12X and HCS12 INDEPENDENT TRACE CLOCK TRACE FPGAS TRACE LED INDICATORS MISC CONNECTORS ALLOW SAMPLING USER-DEFINED 16 SIGNALS 8 MByte TRIGGERS & FILTERS RAMS FOR 8MByte OF S12X GLOBAL ADDRESS SPACE (component side & print side) TRACE RAMS 1,000,000 FRAMES 72-bit WIDE (component side & print side) TRIGGER-IN & TRIGGER-OUT CONNECTORS AND TPs

  5. HCS12 Emulator Components * FLEX-CABLE ADAPTER ALSO AVAILABLE FOR THE S12X FAMILY

  6. HCS12 Emulator Components

  7. Escaping From the Target at Any of 4 Directions S12X & HCS12 Target Boards are often buried deep between modules, with very limited access to the target board. The Nohau Flex-Cable resolves this problem by allowing to escape from the target, and connect to the full-emulator, in any of 4 directions. The flex-cable is also designed for high-speed operation above 100MHz, and includes controlled impedance and shielding

  8. System View

  9. The IntuitiveSeehau User-Interface

More Related