1 / 25

Bemalastic 1213 Bridge Deck Membrane

Bemalastic 1213 Bridge Deck Membrane. Bridge Deck Waterproofing. Bridge Preparation. After sandblasting, Waterproofing primer applied. Which system one ply/two ply.

elvina
Download Presentation

Bemalastic 1213 Bridge Deck Membrane

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bemalastic 1213 Bridge Deck Membrane Bridge Deck Waterproofing

  2. Bridge Preparation

  3. After sandblasting, Waterproofing primer applied

  4. Which system one ply/two ply • One ply is generally used on MTO bridges in Ontario. The application is 5 mm thick Bemalastic 1213 and MTO approved 1/8 inch Protection Board. • Two Ply is generally used on the Superelevated bridges and in Toronto where the fabric reinforcement Reemay is sandwiched between two layers of Bemalastic 1213 approximately 2.5 mm thick each. Then the hot material layer is covered with protection board as above.

  5. Typical Single Ply Application

  6. Bemalastic 1213 applied 5 mm thick on the deck

  7. Protection Board being applied into the hot rubber

  8. Ready to pave

  9. Typical 2 ply system application

  10. Other Waterproofing

More Related