1 / 27

Reinforced Plastics

Reinforced Plastics. MFG 355. Composites. Metals are isometric materials Composites can cut weight by not being isometric and still maintain the strength in the desired directions Composites are, by definition, solid materials composed of more than one substance in more than one phase.

emerald-bryant
Download Presentation

Reinforced Plastics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Reinforced Plastics MFG 355

  2. Composites • Metals are isometric materials • Composites can cut weight by not being isometric and still maintain the strength in the desired directions • Composites are, by definition, solid materials composed of more than one substance in more than one phase

  3. Composites

  4. Processes • Thermoplastic processes –Very short fibers • Matched die/compression molding • RTM • Spray-up • Hand lay-up for wet and prepreg materials • Filament winding and fiber placement • Pultrusion

  5. Advanced Composites • Long (continuous) fibers • Very high performance reinforcements • Carbon and aramid • Resins are also very high performance • Typically aerospace applications

  6. Engineering Composites • Shorter fibers/fiberglass • Lower mechanical properties (stiffness) • Lower performance resins

  7. Matrix Materials • Resins • Both thermosets and thermoplastics can be used • Short fibers are generally used in thermoplastics • Long fibers are generally used with thermosets

  8. Matrix Materials • Short fiber composites • Less than 0.2 inches (whiskers) • Processed through standard thermoplastic processes • Must pass through gates, runners, and gap between processing screw and barrel walls • Thermoplastics generally benefit greatly from even the short reinforcement materials

  9. Matrix Materials – FRP • Intermediate length fiber reinforcement • The longer the fibers, the more difficult it is to coat the fibers enough to reap strength benefits • Low viscosity thermosets “wet-out” the materials better than high viscosity thermoplastics • Generally use unsaturated polyester and vinylester resins for FRP

  10. Matrix Materials – Advanced • Very long fibers or continuous fibers • Typically used with thermosets, also for “wet-out” reasons • Used generally in advanced composite parts and have greater material property requirements • Generally use epoxy resins

  11. Reinforcements • Three main types of fibers • Fiberglass • Carbon fiber or Graphite • Organic fibers, aramids (kevlar)

  12. Fiberglass • Spin molten glass • Different types of glass can be made • E-glass (improved electrical resistance) • S-glass (high strength) • C-glass (high chemical resistance)

  13. Carbon or Graphite Fiber • Originally some distinction was made—now the two refer to the same material • Made from PAN fibers, pitch or rayon fibers • Through heating, raw material looses most non-carbon atoms in the chain • Processing also aligns carbon chains • Carbon fibers have very high modulus (stiffness)

  14. Organic Reinforcement Fibers • Aramid fibers have greatest strength and modulus properties of organic fibers • Kevlar is the most commonly used aramid fiber • Aramids are strong and stiff but their greatest value is in impact applications • Front of airplane wings • Armor applications

  15. Reinforcement Forms • Fiber manufacturers package the fibers on spools called tows • Fibers are generally converted to other forms after manufacturing • Chopped fibers (including whiskers) • Mat (random) • Woven fibers • Tapes • Prepregs

  16. Manufacturing Methods • Thermoplastic processes using short fibers • Injection molding • Extrusion • Minor changes are made to accommodate the fiber reinforcements • All gaps in flow path should be increased • A resin viscosity decrease may be necessary

  17. Manufacturing Methods • Matched die or Compression molding • Reduced flow path over injection or extrusion • SMC compression molding allows for continuous fibers, mats or weaves • These processes offer parts that are finished on both sides where most other composite processes do not

  18. Manufacturing Methods • Resin transfer molding • Fiber preform is placed in the mold cavity • Preform doesn’t move—resin is pulled/pushed in

  19. Manufacturing Methods • Spray-up • Fibers are chopped, coated with resin and sprayed onto the mold

  20. Manufacturing Methods • Hand Lay-up (wet and prepreg) Wet Prepreg

  21. Fiber Orientations • Isometric materials have equal strength in all directions • Composites can be lighter weight by not having strength in the directions that it is not needed • Lay-up still has to have some balance and symmetry

  22. Vacuum Bagging • Provides for increased part consolidation • Reduces matched die mold costs

  23. Manufacturing Methods • Filament winding and fiber placement • Fiber placement has greater accuracy • Fiber placement can wind on less symmetrical and even partially concave mandrels • Tubes, tanks, wind turbine blades and rockets

  24. Manufacturing Methods • Roll wrapping • Faster than filament winding • Limited to symmetrical mandrels

  25. Manufacturing Methods • Pultrusion • High volume production • Comparable to extrusion but the main processing force is tension • Profile is pulled from the machine

  26. Plant Concepts • Many of the processes require considerable space • Curing equipment for large parts can be very large (and expensive) • Controlling volatiles (solvents and resins) must be taken care of • Molds can be both expensive and fragile

  27. Thank You

More Related