1 / 11

Kaarle J. Kupiainen 1,2 , Mikko Savolahti 1 , Niko Karvosenoja 1 , Zbigniew Klimont 2

Finnish BC emission inventory, and national characteristics and user practice influence on domestic wood combustion emissions. Kaarle J. Kupiainen 1,2 , Mikko Savolahti 1 , Niko Karvosenoja 1 , Zbigniew Klimont 2 1 Finnish Environment Institute (SYKE)

emilia
Download Presentation

Kaarle J. Kupiainen 1,2 , Mikko Savolahti 1 , Niko Karvosenoja 1 , Zbigniew Klimont 2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Finnish BC emission inventory, and national characteristics and user practice influence on domestic wood combustion emissions Kaarle J. Kupiainen 1,2, Mikko Savolahti 1, Niko Karvosenoja1, Zbigniew Klimont 2 1 Finnish Environment Institute (SYKE) 2 International Institute for Applied Systems Analysis (IIASA) Project “Mitigation of Arctic warming by controlling European black carbon emissions (MACEB)” LIFE+ 09 Environment Policy and Governance

  2. National BC emission inventory (FRES model) Some model results and comparisons with global and regional models Effect of national characteristics on domestic wood combustion emissions User practice influence on domestic wood combustion emissions – sensitivity study Conclusions Content

  3. Finnish Regional Emission Scenario (FRES) modelwww.environment.fi/syke/pm-modeling • Finnish national IAM, the national tool under UNECE CLRTAP • Anthropogenic emissions 1990, 2000, 2005, 2010, 2020, 2030, 2050 (several activity scenarios) • Comprehensive and congruent calculation for primary and secondary PM gases • primary PM (TSP, PM10 - 2.5 - 1 - 0.1, chemical composition in size classes) • SO2, NOx, NH3, NMVOC • GHGs • Abatement technologies and costs • 8 main sectors, more than 100 subsectors GAINS model compatible • Large point sources (approx. 250), area emissions (1 1km2) • Several emission heights BC OC Source: Kupiainen et al. 2006. EMISSIONS OF PRIMARY CARBONACEOUS PARTICLES, THEIR UNCERTAINTIES AND SPATIAL ALLOCATION IN FINLAND. Proceedings of the IUAPPA Regional Conference, Lille and Paris, 5-8 September 2006

  4. Finnish Regional Emission Scenario (FRES) modelwww.environment.fi/syke/pm-modeling Machinery and off-road Road traffic OC Domestic wood comb., stoves Domestic wood comb., boilers

  5. Transport and domestic wood combustion are key sectors BC emission reductions happen mainly in the transport sector (Euro-standards) The national climate strategy (2008) scenario assumed increasing fuel wood use and some improvements in combustion technology in the domestic sector The additional emission reduction scenario (2020red) assumes further reduction potential (-25% BC, -19% OC) Domestic sector: All masonry heaters are modern (except in recreational buildings), boilers are equipped with ESPs (-8% BC, -7% OC reduction) Transport sector: All vehicles have Euro5 or Euro6 abatement (-16% BC, -9% OC reduction) Power generation & Industry: Fabric filters in large combustion plants, ESPs in small combustion plants (<50MW) (-1% BC, -3% OC reduction) Finnish BC and OC emissions by sector

  6. Comparison with other BC emission inventories • Comparison with Bond et al. (2007)* BC inventory and the GAINS model** (http://gains.iiasa.ac.at) BC results shows rather good agreement • Key sectors are the same in all assessments, but there are differences in total emissions as well as sectoral distribution * National data for Arctic Council countries presented in Sarofim et al. 2009. Current Policies, Emission Trends and Mitigation Options for Black Carbon in the Arctic Region. • **GAINS model projections: • ’nat’ activities according to the national submissions within the Gothenburg protocol revision • ’IEA REF’ and ’IEA 450’ according to the International Energy Agency 2009 databases

  7. BC and OC emission factors – national characteristics have to be reflected in emission inventories • Dataset in 2005 (Kupiainen et al. 2006) was compiled based on international measurement literature on stoves (national BC/OC measurement were not available at the time) • National measurements (field and lab) on Finnish devices became available in 2007-2009 (Tissari et al., 2007) and showed important differences compared with the old dataset : • Masonry heaters and sauna stoves are most common device types in Finland (see pie chart). They are operated for a short time and with a high combustion rate. • This is in contrast to e.g. iron stove or fireplace (abundant in Central Europe, US) where the need is to generate heat for a long time at low power Fig : Tissari et al. 2007. AtmEnv 41, 8330-8344 FRES model

  8. BC and OC emission factors – national characteristics have to be reflected in emission inventories Emission factors (mg MJ-1) Emissions (Gg a-1) +12% in total BC emissions, +39% in domestic wood sector BC -19% in total OC emissions, -44% in domestic wood sector OC

  9. Sensitivity study on the influence of combustion practices on small scale wood burning emissions • Emissions in domestic sector are influenced by combustion devices, fuel properties and user practices • Studies indicate drastic increases in PM emissions from wood heaters and stoves with poor user practices • No exact knowledge of the share of users with bad practices -> sensitivity study • Three emission profiles were designed for input to the model to study the effect of common user mistakes in operation of residential heaters • Emissions with best operational practice of a heater • Emissions with common user mistakes (not fuel related) • Current emission profile was treated as average practice (composite of several devices and measurements) (2) (3) (1) • 1) and 2) based on Tissari et al. 2008 (Atm Env 42, 7862-7873) and Frey et al. 2009 (Boreal Env Res. Vol 14, 255-271)

  10. Sensitivity study on the influence of combustion practices on small scale wood burning emissions • Assumed ‘Poor combustion practice’ situation: • 50% of users make the common mistakes, 5% burn according to the best operational practice of the heaters • Assumed effect of education campaign: • 90% of poor practice switched to best and average practice • 20% of average practice is switched to best practice • After the campaign • 5% of users make common mistakes, 35% burn according to best operational practice • Emission reductions -30% in domestic wood BC -15% in total BC -47% in domestic wood OC -30% in total OC Assumed effect of an educational campaign

  11. Conclusions • Finnish BC emission inventory in good agreement with the GAINS model • Small scale combustion in the domestic sector is a major source of BC (and OC) and it is projected to become the biggest emitter in the future. • National characteristics of domestic wood combustion (e.g. influence of stove types and use patterns) should be reflected in BC inventories • Emissions in domestic sector are influenced by combustion devices, fuel properties and user practices • Common mistakes in user practices can lead to significantly higher PM emissions than during optimal operation • Share of users making common mistakes in operating their stoves can be significant • Emission reductions could be reached through non-technical measures, e.g. informing and educating people. The benefit of such measures is that the effect could be rather immediate compared to technical measures

More Related