1 / 17

I. Kolmasova 1 , O. Santolik 1,2 , J. Soucek 1 , J.-E. Wahlund 3 , J. Bergmann 3

IMPLEMENTATION OF PLANETARY PROTECTION REQUIREMENTS FOR THE RPWI EXPERIMENT ONBOARD THE JUICE SPACECRAFT. I. Kolmasova 1 , O. Santolik 1,2 , J. Soucek 1 , J.-E. Wahlund 3 , J. Bergmann 3. 1 Institute of Atmospheric Physics AS CR, Prague, Czech Republic, iko@ufa.cas.cz

melia
Download Presentation

I. Kolmasova 1 , O. Santolik 1,2 , J. Soucek 1 , J.-E. Wahlund 3 , J. Bergmann 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IMPLEMENTATION OF PLANETARY PROTECTION REQUIREMENTS FOR THE RPWI EXPERIMENT ONBOARD THE JUICE SPACECRAFT I. Kolmasova1, O. Santolik1,2, J. Soucek1, J.-E.Wahlund3, J. Bergmann3 1Institute of Atmospheric Physics AS CR, Prague, Czech Republic, iko@ufa.cas.cz 2 Faculty of Mathematics and Physics, Charles University, Prague, Czech Republic 3 Swedish Institute of Space Physics, Uppsala, Sweden International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  2. MOTIVATION UN Space Treaty of 1967 Article IX States Parties to the Treaty shall pursue studies of outer space, including the Moon and other celestial bodies, and conduct exploration of them so as to avoid their harmful contamination and also adverse changes in the environment of the Earth resulting from the introduction of extraterrestrial matter, and where necessary, shall adopt appropriate measures for this purpose. International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  3. MOTIVATION • COSPAR (Commitee on SpaceResearch) isresponsiblefortheformulationofthethe planetary protection rules • anymission to planetary bodies must follow guidelines for protection of terrestrial and extraterrestrial biosphere and for the preservation of the integrity of sites for future exploration studies • planetary protection and organic contamination control are important to mission planning, science, and design of hardware systems International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  4. SOLAR SYSTEM BODIES CATEGORIZATION The solar system bodies are divided in 5 categories according to the body structure and mission type (flyby, orbiter, lander). The categorization is supported by an analysis of the “remote” potential for contamination of the liquid-waterenvironments that may exist beneath their surfaces. A probability of introducing 1 viable terrestrial organism should be less than 10-4 (for Ganymede)‏ International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  5. CATEGORY SPECIFIC LISTING Category I: Flyby, Orbiter, Lander: Undifferentiated, metamorphosed asteroids Category II: Flyby, Orbiter, Lander: Venus; Moon (with organic inventory); Comets; Carbonaceous Chondrite Asteroids; Jupiter; Saturn; Uranus; Neptune; Ganymede; Titan; Triton; Pluto/Charon; Ceres; Kuiper-Belt Objects > 1/2 the size of Pluto; Kuiper-Belt Objects < 1/2 the size of Pluto Category III: Flyby, Orbiters: Mars; Europa; Enceladus Category IV: Lander Missions: Mars; Europa Category V: Any Earth-return mission International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  6. PLANETARY PROTECTION ACTIVITIES • Probability of impact and survival factors analysis • Spore Burden analysis • Spores - a special dormant state of some bacteria • Burden - in PP practice, the part of sampled microbes that survive a heat shock (80°C, 20 min) • Probability of Contamination • Contamination Control • Recontamination Prevention International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  7. PROBABILITY OF IMPACT • expectedmaximum probability of accidental impact on Europa, Titan, Ganymede, Callisto and Enceladus • Flyby and Orbiter spacecraft value: 10-2 • Launch vehicle (or part thereof) value: 10-4 • the impact analysis includes failure modes, which is needed for the assessment of transfer of spores to the surface International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  8. SURVIVAL FACTOR ANALYSIS The number of microbes of type X that could survive on an icy body is based on the initial contamination level [NX0] and various survival factors: NXS = NX0 xF1x F2x F3x F4 xF5 xF6 xF7 F1—Total number of cells relative to assayed cells (NX0)‏ F2—Bioburden reduction survival fraction, when applied F3—Cruise survival fraction F4—Radiation survival fraction F5—Probability of impacting a protected body, including spacecraft failure modes F6—Probability that an organism survives impact F7—Burial survival fraction NXSshould be less than 10-4 International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  9. HOW TO ACHIEVE ACCEPTABLE CONTAMINATION (Nx0) • Surfaces must tolerate sampling with damp swabs • Areas that cannot be cleaned/assayed must be identified • Surfaces should be smooth, spores like rough surfaces • Components and materials should tolerate temperatures used for dry heat microbial reduction (110°C to 125°C)‏ • Record keeping (assay results, hardware treatment history,manipulation with hardware after collection of assays or microbial reduction process)‏ • All of the above apply also to hardware from outside sources International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  10. CONTAMINATION CONTROL Class 105 (ISO class 8) or better for payload assembly International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  11. RECONTAMINATION PREVENTION • good cleanroom practices minimize recontamination • use of remove-before-flight covers • proper storage • transport in clean boxes International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  12. ECSS-Q-ST-70-55C Microbial examination of flight hardware and cleanrooms Swab assay 1 ‏ for aerobic mesophilic heat tolerantspores and vegetative bacteria International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  13. ECSS-Q-ST-70-55C Microbial examination of flight hardware and cleanrooms Swab assay 2 for aerobic mesophilic bacteria International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  14. RPWI (RADIO & PLASMA WAVES IINVESTIGATION) • Experiment selectedfor the JUICE (JUpiterICy moon Explorer) spacecraft • RPWI is a highly integrated instrument package that provides a set of plasma and fields measurements • The key planetary protection requirements for the ESA JUICE mission are: • 1) the probability of impact on Europa should be evaluated and strictly controlled • 2) the chance for contamination of Ganymede’s putative ocean should be negligible. International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  15. DESIGN RULES FOR RPWI TO FULFILL PLANETARY PROTECTION REQUIREMENTS • consider parts qualifications and manufacturing processes when selecting components; all components and materials should survive 125°C when inactive • take into account the advantage of vacuum and radiation conditions after launch • assess temperature/time profiles of manufacturing processes, especially for items behind radiation shielding • design for tolerance to assays, accountable surfaces must tolerate sampling with damp swabs or wipes International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  16. DESIGN RULES FOR RPWI TO FULFILL PLANETARY PROTECTION REQUIREMENTS • identify areas that cannot be cleaned/assayed • IPA or ethanol are acceptable for passive contamination control • assembly and test of flight hardware in ISO 8 clean room conditions • follow ECSS-Q-ST-70-55C (microbial examination of flight hardware and cleanrooms) and ECSS-Q-ST-70-58C (bioburden control of cleanrooms)‏ • transport in clean boxes to prevent recontamination International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

  17. Thankyouforourattention! Спосибо за Ваше внимание! International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments” IKI, Moscow, Russia, 7 March 2013

More Related