100 likes | 241 Views
ACC Quick and Easy CDA. The Most Flexible, Easy-to-Use and Cost-Effective Car Drying Aid Ever. Page 2 of 10. How Does ACC Quick and Easy CDA Work?.
E N D
ACC Quick and Easy CDA The Most Flexible, Easy-to-Use and Cost-Effective Car Drying Aid Ever
Page 2 of 10 How Does ACC Quick and Easy CDA Work? • Q&E CDA is a special blend of hydrocarbons and emulsifiers that when blended at the right level of EB (ethylene glycol mono butyl ether) followed by dilution with water, produce both cost effective and high performance car drying aids for a wide range of dilution rates • Fool Proof and Freeze/Thaw stable formulations that work every time! • Ranges of formulation concentrations from 100 to 10% Quick and Easy CDA/EB blends in water • Easily makes all products with recommended dilution rates of from 1:1200 to 1:100 • NO gelling or thickening during dilution
Page 3 of 10 Physical (Typical)Properties of ACC Quick and Easy CDA
Page 4 of 10 The Ease of Formulating with ACC Quick and Easy CDA • Determine (using charts and information supplied) what concentrations of ACC Quick and Easy CDA/EB blend you need for the desired cost, dilution rates and and drying performance • Add the proper amount of ACC Quick and Easy CDA and EB to a clean tank and mix well. If fragrance is desired, add fragrance and blend with organics. (Note: If greater than about 1% fragrance is added, especially to low actives formulations, you may need to add additional (about same level as fragrance) EB to maintain clarity and stability.) • Following mixing of the CDA/EB and Fragrances (if desired), water should be added slowly with mixing until all the desired water is added. Final product should be crystal clear and uniform and disperse completely clear into water. • Product is ready to drum and use at recommended dilution rates
Page 5 of 10 Recommended Ratios of ACC Quick and Easy CDA, EB and Water for Optimum Formulations Greater than about 88 to 90% water additions, may result in freeze thaw instability
Page 6 of 10 Typical Formulation Using ACC Quick and Easy CDA • Dilution rate for final customer would be in the range of 300 to 400:1
Page 7 of 10 Car Drying Aids Product Dilutions for ACC Quick and Easy CDA • Higher dilution rates than 87% with water are not recommended due to possible F/T stability issues
Page 8 of 10 Economics of ACC Quick and Easy CDA Formulations • Total Chemical Costs for making 450 lb. DrumUsing 70% ACC Quick and Easy CDA/ 30% EB • Assumed Pricing of $2.20/lb. of ACC Q & E CDA and $1.40/lb. EB
Page 9 of 10 Benefits of Using ACC Quick and Easy CDA • Product Consistency and Stability-- Fool Proof Operation • Only need ONE basic formula with EB to make hundreds of different customer products-- Just dilute with water to desired concentration • Freeze / Thaw Stable Products • Products can be made to achieve dilution rates from 100:1 to 1200:1 using the same product/EB blend and diluting appropriate concentrations. • No added emulsifiers needed • No oils to stock or handle • Minimal Smearing of Windshields by products • Cost Effective compared to other car drying aid emulsifiers for drum users • Rapid water sheeting and beading from car surface due to finest particle sizes of oil droplets
Page 10 of 10 Contact our office today.We look forward to hearing from you! 7050 Engle Road, Suite 103 Middleburg Heights, OH 44130 Phone: 216.221.3952 Fax: 216.221.4291 www.advancedchemicalconcepts.com