Using your ENA Connect Phone

1. Using your ENA Connect Phone Polycom IP 320/330

2. Getting to know your IP 320/330 Soft Keys Navigation arrows: Left arrow will take you to previous menu Dial Button Line keys – this is a 2 line phone Menu Button Speaker Button Mute Button

3. Buttons versus Soft Keys Throughout this training and in the user guides, we will refer to both Buttons and Soft Keys • Buttons: Refers to the physical buttons on the phone. These vary depending on the phone model, but are labeled with the name of the function they perform. They always perform the same function. • Soft Keys: Refers to the keys that appear below the LCD screen on your IP Phone. These are called “soft” because the function they perform changes depending on the state of the phone. You will notice different options appearing on the soft keys when you are on-hook versus on a call, as well as when you are using the soft keys to perform certain tasks.

4. Placing a call • Preferred Method (like a cell phone) • Enter number, with handset still in cradle, and • Pick up handset (you will be in handset mode), OR • Press “Dial” soft key or button (you will be in speakerphone mode) • Option 2: • Pick up handset and dial the number • NOTE: Dialing this way, there is an inter-digit timeout. If you wait too long between entering the digits for the number you want to call, the system will think you are done entering digits and attempt to dial the numbers you have entered so far

5. Placing a Call (cont’d) • You do *not* need to dial “9” to get an outside line • You do *not* need to dial “1” before making a long distance call • If you do dial “9” to get an outside line, or “1” for a long distance number, don’t worry, the call will still go through

6. Answering a call • Pick up the Handset • Press the Speaker button • Press the Headset button • Press the Line key for the line that is ringing (this will activate the speakerphone) • Answer or Reject soft key • Answer soft key will answer the ringing line and put your phone in speakerphone mode • Reject soft key will stop the call from ringing at your phone and either send it to Voicemail or the next number in your call forwarding sequence, if you have one set up

7. Answering multiple calls • If you are on line 1 and another call comes in, it will ring on line 2 • You will hear a beep and the LED next to line 2 will flash • Press the Line 2 button to answer that call. This will automatically put the party on line 1 on hold • If you are done with the party on Line 1, you can press the “End Call” soft key before answering the second call • Use the Line Buttons to toggle back and forth between the active calls you have. The LCD screen will update to show you who is on each line • When you are done with a call, press the “End Call” soft key to disconnect that call.

8. Calling from your Call Lists: IP 320/330 • Press the Menu button, select Features, then use the down arrow on the silver disk, to get to Call Lists, then use the down arrow to select the call list you would like to view • To call someone back using your call lists, access them as noted above. Use the arrows to select the contact you want to call and then press the Dial button • Note: to quickly access your “Received calls” you can use the Callers soft key

9. Setting Up Your Voicemail • The first time you call into your voicemail, you will be asked to: • Change Your PIN • The default PIN for all new users is 1111# • Your new PIN can be between 4 and 15 digits • Record Your Name Announcement • Record Your Greeting • Please do ALL THREE! • If you don’t record your name announcement, then callers will not be able to access you in the Dial By Name directory of the Auto Attendant • If you already accessed your mailbox for the first time and didn’t record your name announcement and/or greeting, you can do it now, but logging into your mailbox, choosing 9 for User options, 1 for Greetings/Name Announcements, 1 to record your Greeting and 2 to record your Name Announcement

10. Checking Voicemail: IP 320/330 • How to know you have new messages: • Red Indicator light will blink • An Envelope icon will appear next to your extension number on the LCD screen • When you pick up the handset you will hear stutter dial tone • To check your messages • Press the VMail soft key, and enter your PIN • If you perform the above steps from an ENA Connect phone in your organization (other than your own) press * when asked for your PIN, then enter your mailbox number and PIN • From a phone outside your ENA Connect system, dial your number and press * when you hear your voicemail greeting. • You may need to access your number by using the Dial by Name Directory off your school’s Auto Attendant

11. Using Voicemail • When listening to your Messages • Option 1 = Replay the message • Option 2 = Save the message • Option 3 = Delete the Message • Option 4 = Forward the message to another subscriber on the system • Record an introduction to the forwarded message • Press 6 to add recipients • Press 2 to Send • Option 5 = Reply to Message • Option 6 = Plays envelope information for that message only Note: if you don’t want to hear the Envelope information before your messages are played, you can turn that off in your user options. From the main menu, choose 9 for User Options, then 3 for Message Playback Options, then 2 for Envelope Information Playback

12. 3-way Conference • You can Conference 3 people (including yourself) • During an active call, press Conference button or the more then confrnc soft keys • Note: IP 320/330 do not have a Conference button so users will need to use the soft key • Enter number of person you want to bridge in • Note: the first person is on hold during this time • When that person answers, hit conference button or confrnc soft key to join all parties together • If you would like to “split” the conference into two separate calls, you can press the split soft key.

13. Transferring a call: IP 320/330 • Blind • Answer call • Press Trans soft key • Press Blind soft key • Enter the number you want to transfer to • Press the Dial Button • Consultative • Answer call • Press Trans soft key • Enter the number you want to transfer to • Announce the caller (the caller is on hold during this step) • Press Trans soft key again to complete the transfer • Directly to Voicemail • Answer call • Press Trans soft key • Press Blind soft key • Dial *90 and extension • Press the Dial Button

14. Applications: IP 320/330 • Press the Menu button, then select Applications • Applications allows you to view the following • Weather • Current weather • Weather forecast • Weather alerts • Admin • Provisioning

15. Adding a contact as a star code speed dial • For contacts that you call often, you may want to make them a star code speed dial • From the phone: Dial *74<speed dial number>*<phone number>, where <speed dial number> is a two digit number between 01 and 20, and <phone number> is the number to assign to the speed dial. • Recommend dialing this string with the handset on hook and then pressing the “Dial” button. The system will play a confirmation message that your speed dial has been accepted Note: This function can also be performed in the portal

16. Call Forwarding – From the Phone • 3 Main types of Call Forwarding • *62 – Call Forward on Busy (*63 to reset) • NOTE: All lines must be busy for the call to be forwarded • *72 – Unconditional Call Forward (*73 to reset) • *92 – Call Forward on No Answer (*93 to reset)

17. Redial • Press “redial” Button (if your phone has one)or • *00