1 / 11

ECE4006 Group 6 – Presentation 9

Track the progress of Gigabit Ethernet development including board soldering, testing, debugging, layout adjustments, and financial updates. Stay updated on upcoming tasks and testing results.

estherm
Download Presentation

ECE4006 Group 6 – Presentation 9

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ECE4006 Group 6 – Presentation 9 Gigabit Ethernet Gautam Khanna http://content.honeywell.com/vcsel/products/datacom.stm

  2. Gigabit Ethernet - Overview • Upcoming Tasks • Order PCB Board • Complete Testing of Tranceiver Board • Prepare Bill of Materials • Start Work on Final Report Completed/In Progress • Tranceiver Board • Soldered 2nd and 3rd boards • Tested • Debugging • 2nd Run Tranceiver Layout • Revised Gantt Charts • Updated Financial Budget • Website Updated

  3. Last Week (2nd Tx Board Tested) PRBS7 2nd Tx Board Soldered

  4. This Week….Adjustments Made to 2nd Board D21.5 PRBS7

  5. 3rd Board – Soldering & Surgery

  6. Results of 3rd Board • Possible Causes of Jitter: • Bad Solder Joints • Underneath Ground Plane may be too close to pins which are not grounded • NO CAPACITOR DECOUPLING!!!!!!!!! PRBS7 – Baseline Transmitter Test

  7. Receiver Testing Attenuation Testing Setup PRBS7

  8. Layout for 2nd Board

  9. Financial Budget

  10. Gantt Chart Update

  11. Tasks For Next Week • Order PCB Board • Solder the new Tranceiver Board • Complete Testing of Tranceiver Board • Prepare Bill of Materials • Start Work on Final Report

More Related