1 / 14

Program PAL using BP

Program PAL using BP. by Svilen Piralkov. Running BP Win. Open BPWin from the Deskop When Registration prompt appears click “NO”. Main Window. Click “Device” to select the PAL to be used. Select Device. Choose “Lattice GAL22V10/B/BQ/C/D” and click “Select”

evangeline-kline
Download Presentation

Program PAL using BP

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Program PAL using BP by Svilen Piralkov

  2. Running BP Win • Open BPWin from the Deskop • When Registration prompt appears click “NO”

  3. Main Window • Click “Device” to select the PAL to be used

  4. Select Device • Choose “Lattice GAL22V10/B/BQ/C/D” and click “Select” • Verify that the Device selected is the same as the chip used.

  5. Main Window • Once the device is selected click “Data Pattern” to load the JED file

  6. Data Pattern • Make sure “Hexadecimal” is selected • Click “Open”

  7. Load File • Click “Browse…” to choose the JED file to load it to the PAL

  8. Select a File • Select the file and click Open

  9. Load File • Click OK

  10. Data Pattern • Click OK

  11. Main Window • Verify that the “Device” and “Data Pattern” are the ones desired • Check the following boxes: • Continuity • Erase • Program • Verify & Test Twice • Secure & Test Twice • Click “PROGRAM”

  12. Program PAL • Click “Ok”

  13. Fuse Warning • If this window appears click “Ignore” • After programming the device the software should return back to the main window

  14. PAL Programmed • No errors should appear and “Function Complete” should be displayed at the bottom.

More Related