1 / 24

C LIC T est F acility 3

C LIC T est F acility 3. The Controls System. Stephane Deghaye AB-CO-FC Section Meeting 18-02-2004. Overview. The CLIC machine – Introduction The CTF3 – The Machine View The CTF3 – The Controls View The CTF3 – The Visit. Introduction to CLIC. CLIC: C ompact LI near C ollider

eve
Download Presentation

C LIC T est F acility 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CLIC Test Facility 3 The Controls System Stephane Deghaye AB-CO-FC Section Meeting 18-02-2004

  2. Overview • The CLIC machine – Introduction • The CTF3 – The Machine View • The CTF3 – The Controls View • The CTF3 – The Visit AB/CO/FC Section Metting Stephane Deghaye

  3. Introduction to CLIC • CLIC: Compact LInear Collider • Electron-Positron collider • Energy range: 0.5 to 5 TeV • Two beams acceleration scheme • Compact: ~40 km • High gradient: 150 MV/m • High RF frequency: 30 GHz AB/CO/FC Section Metting Stephane Deghaye

  4. CLIC Layout AB/CO/FC Section Metting Stephane Deghaye

  5. CLIC Drive Beam Layout AB/CO/FC Section Metting Stephane Deghaye

  6. Why the CTF3? CLIC Test Facility 3 addresses feasibility issues: • Test of drive bean generation (bunch frequency multiplication) • Produce RF power @ 30 GHz • Validate RF power source design • Test of high current – long pulse gun Reuse the LEP Pre-Injector complex AB/CO/FC Section Metting Stephane Deghaye

  7. CTF3 Layout AB/CO/FC Section Metting Stephane Deghaye

  8. Bunch Frequency Multiplication • The only way to produce enough RF power @ 30 GHz • Transform very long pulses into short pulses with higher frequency • Delay loop  multiplication by 2 • Combiner ring  multiplication by 5 • CTF3 klystrons @ 3 GHz  3 GHz x 2 x 5 = 30 GHz AB/CO/FC Section Metting Stephane Deghaye

  9. Delay Loop AB/CO/FC Section Metting Stephane Deghaye

  10. Combiner Ring AB/CO/FC Section Metting Stephane Deghaye

  11. CTF3 Phases • The project is divided in 3 phases • Preliminary phase (already done) • Initial phase (where we are) • Nominal phase (end 2004 or early 2005) • This staging allows to deal with the increasing demands on performance as new hardware becomes available. AB/CO/FC Section Metting Stephane Deghaye

  12. Preliminary Phase • Use LPI with a shortened linac and a modified EPA (isochronous) • New gun (CLIO by LAL) • Main goal: bunch frequency multiplication AB/CO/FC Section Metting Stephane Deghaye

  13. Preliminary Phase: Results • Factor 5 recombination successfully performed • Bunch distance from 333 ps to 67 ps • Frequency from 3 GHz to 15 GHz AB/CO/FC Section Metting Stephane Deghaye

  14. Initial Phase • New linac suited for high current • Another new gun (CTF3 gun by LAL too) • Main goals: fully loaded acceleration and RF power production AB/CO/FC Section Metting Stephane Deghaye

  15. Nominal Phase • New delay loop and combiner ring with RF deflector @ 1.5 GHz and 3 GHz resp. • Main goals: recombination at high charge and RF power production. • Delay loop built by Frascati AB/CO/FC Section Metting Stephane Deghaye

  16. The Controls View For the first run of 2004 we have: • 15 VME crates including the MTGC • 2 CAMAC crates • 1 PLC AB/CO/FC Section Metting Stephane Deghaye

  17. Timing • Dedicated MTG (DMCRMTGC) producing 2 zero crossing synchronised telegrams (SCT & FCT) • SCT: 1.2 s BP, classical format. • FCT: 10 ms BP, bits patterns for PROD & MEAS groups. Ex: bit 4 in MEAS indicated whether we perform the Sem-Grid acquisition or not. AB/CO/FC Section Metting Stephane Deghaye

  18. Power Converter • Still have CAMAC controlled power converters in the klystron gallery • Converters in building 2002 and 2009: CAMAC  MIL 1553. AB/CO/FC Section Metting Stephane Deghaye

  19. RF Controls • Low level RF equipments (phaser, attenuator…) on 1553 • Modulator-Klystrons either CAMAC/MIL 1553 or PLC solutions • Phase compression control • Control using the Joeger functions generator • Acquisition using the SIS3300 ADC module • Water cooling stations based on PLC • Software to be done AB/CO/FC Section Metting Stephane Deghaye

  20. Instrumentation • BPM, sem-grid, collimator, MTV & streak camera • New ADC module for the CTF3: SIS3300 • Use the machine 96 MHz as sampling clock • Need ECL triggers • Everything observed with xSampgen but dedicated developments forseen • CTF3 is the 1st machine with new VME based video system AB/CO/FC Section Metting Stephane Deghaye

  21. Vacuum Equipments • Standard X25 based control • Gauges direct acquisitions for RF conditioning • New AT/VAC control system for the delay loop (see LEIR) AB/CO/FC Section Metting Stephane Deghaye

  22. What’s next ? • New stepper motor solution from 2nd run • New PETS line to produce RF power from the 30 GHz harmonic • End of the year, End of the linac. • Transfer line and delay loop under the Frascati responsibility • Frascati will use as far as possible the CERN standards  Same equipments for CO AB/CO/FC Section Metting Stephane Deghaye

  23. Acknowledgements • Great thanks to Frank Tecker (AP/OP) for the drawings and the explanations. AB/CO/FC Section Metting Stephane Deghaye

  24. CTF3 – The visit Let’s have a look at the hardware !! AB/CO/FC Section Metting Stephane Deghaye

More Related