1 / 10

LLRF and Beam-based Longitudinal Feedback

LLRF and Beam-based Longitudinal Feedback. Outline Scope Local feedback loop requirements How this fits into global feedback Other signals Conclusions. Scope. The low level RF controls system consists of RF phase and amplitude controls at these locations: Laser Gun (Klystron 20-6)

fadhila
Download Presentation

LLRF and Beam-based Longitudinal Feedback

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LLRF and Beam-based Longitudinal Feedback • Outline • Scope • Local feedback loop requirements • How this fits into global feedback • Other signals • Conclusions

  2. Scope • The low level RF controls system consists of RF phase and amplitude controls at these locations: • Laser • Gun (Klystron 20-6) • L0-A, a.k.a. L0-1 (Klystron 20-7) • L0-B, a.k.a. L0-2 (Klystron 20-8) • L0 Transverse cavity (Klystron 20-5) • L1-S (Klystron 21-1) • L1-X (Klystron 21-2) • L2 - (Klystrons 24-1,24-2,24-3) to control avg phase/ampl of L2 • L3 Transverse cavity (Klystron 24-8) • L3 - 2 sectors of klystrons, S29+S30

  3. Local feedback loop requirements • At each of these locations, the klystron’s phase and amplitude will be monitored and controlled • When beam is present, control will be done by beam-based longitudinal feedback (except for T-cavs); when beam is absent, control will be done by local phase and amplitude controller (PAC)

  4. How this fits into global feedback (Gun)

  5. How this fits into global feedback (L0)

  6. How this fits into global feedback (L1)

  7. How this fits into global feedback (L2)

  8. How this fits into global feedback (L3)

  9. How this fits into global feedback

  10. Conclusions • At 120 Hz, the LCLS LLRF raw signals must be processed, the phase and amplitude corrections must be sent out, applied and achieved • When there is beam, this system will integrate with the beam-based longitudinal feedback by accepting the latter’s RF phase and amplitude corrections and passing them on.

More Related