1 / 12

Objectives

Objectives. How to trim a sketch. How to model a mini iphone keyring stand. Task 1. Draw a square, then draw another square inside, as shown below. Then use the trim button and trim the top edge of the square. This will trim the shape to the one shown below. Final outcome. Task 2.

fanniej
Download Presentation

Objectives

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Objectives How to trim a sketch. How to model a mini iphone keyring stand.

  2. Task 1 Draw a square, then draw another square inside, as shown below. Then use the trim button and trim the top edge of the square. This will trim the shape to the one shown below

  3. Final outcome

  4. Task 2 Log onto fusion 360 and draw this shape.

  5. Add a rectangle that is the thickness of your smart phone. In this case an iphone 6 has a thickness of just over 7.00. It’s rounded up to 7.5mm to account for shrinkage of plastic as it cools. • Add a 5 mm hole of the key ring to go through

  6. Extrude this shape by 5 mm.

  7. Add 5mm fillets to the edges to round the corners.

  8. On the top surface create a new sketch and sketch the shape below and then trim it.

  9. Extrude this shape by 1.5mm. This will allow more grip on the phone.

  10. Select the top surface and create a new sketch. • Add text on to it or a pattern. • Then extrude it by 1.0mm • On the bottom keyring hole, add a fillet of 1.00.

  11. The design should look like this below. • Export it as an STL file and then 3D print it. • This should take under an hour to print if the layer height is set to 2.00 and speed at 100mm/s

  12. Plenary • Explain the function of the trim feature and why you would use it?

More Related