數位系統 Digital Systems

1. 數位系統Digital Systems Department of Computer Science and Information Engineering, Chaoyang University of Technology 朝陽科技大學資工系 Speaker: Fuw-Yi Yang 楊伏夷 伏夷非征番, 道德經 察政章(Chapter 58) 伏者潛藏也 道紀章(Chapter 14) 道無形象, 視之不可見者曰夷 Fuw-Yi Yang

2. Text Book: Digital Design 4th Ed. Chapter 7 Problems 7.16 A ROM chip of 4096 X 8 bits has two chip select inputs and operates from a 5-volt power supply. How many pins are needed for the integrated circuit package? Draw a block diagram, and label all input and output terminals in the ROM. Fuw-Yi Yang

3. Text Book: Digital Design 4th Ed. Chapter 7 Problems 7.16 A ROM chip of 4096 X 8 bits has two chip select inputs and operates from a 5-volt power supply. How many pins are needed for the integrated circuit package? Draw a block diagram, and label all input and output terminals in the ROM. Data bits 8 pins (Output) Address bits 12 pins (Input) Power supply 2 pins (Input) Chip select 2 pins (Input) Fuw-Yi Yang

4. Text Book: Digital Design 4th Ed. Chapter 7 Problems 7.17 The 32 X 6 ROM, together with the 20 line, as shown in below, converts a six-bit binary number to its corresponding two digit BCD number. For example, binary 100001 converts to BCD 011 0011 (decimal 33). Specify the truth table for the ROM. Fuw-Yi Yang

5. Text Book: Digital Design 4th Ed. Chapter 7 Problems Fuw-Yi Yang

6. Text Book: Digital Design 4th Ed. Chapter 7 Problems 7.18 Specify the size of a ROM (number of words and number of bits per word) that will accommodate the truth table for the following combinational circuit components: a. a binary multiplier that multiplies two 4-bit binary words, b. a 4-bit adder-subtractor, c. a quadruple two-to-one-line multiplexer with common select and enable inputs, and d. a BCD-to-seven-segment decoder with an enable input. Fuw-Yi Yang

7. Text Book: Digital Design 4th Ed. Chapter 7 Problems a. a binary multiplier that multiplies two 4-bit binary words, A3A2A1A0 * B3B2B1B0 = S7S6S5S4S3S2S1S0 8 inputs and 8 outputs, 256 X 8 ROM, 256 words, 8 bits each word b. a 4-bit adder-subtractor, A + B = Sum 256 X 5 ROM A – B = Difference 256 X 5 ROM Total 512 X 5 ROM Fuw-Yi Yang

8. Text Book: Digital Design 4th Ed. Chapter 7 Problems c. a quadruple two-to-one-line multiplexer with common select and enable inputs, and each two-to-one-line multiplexer (with select and enable inputs) requires 4 input lines and 1 output line quadruple two-to-one-line multiplexer (with common select and enable inputs) requires 10 (4 * 4 – 2 * 3) input lines and 4 output lines 1024 X 4 ROM, 1024 words, each word 4 bits d. a BCD-to-seven-segment decoder with an enable input. 5 inputs and 7 outputs, 32 X 7 ROM Fuw-Yi Yang

9. Text Book: Digital Design 4th Ed. Chapter 7 Problems 7.22 Derive the ROM programming table for the combinational circuit that squares a 4-bit number. Minimize the number of product terms. Fuw-Yi Yang

10. Text Book: Digital Design 4th Ed. Chapter 7 Problems Fuw-Yi Yang