1 / 17

LDC borstplätering

LDC borstplätering. LDC borstplätering. LDC Portable Electroplating Cold process: used at room temperature , no stress or adjustments because of termal distorsion. To tolerance: normaly no machining required Quick metal build-up: 0,05 mm in 10-15 min.

fleur
Download Presentation

LDC borstplätering

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LDC borstplätering www.ldc-brushplating.com

  2. LDC borstplätering LDC Portable Electroplating Cold process: used at roomtemperature, no stress or adjustmentsbecause of termal distorsion. To tolerance: normaly no machining required Quick metal build-up: 0,05 mm in 10-15 min. Plating: on all conductive materials, castiron, stainless, mild steel, copper, chromeetc Densedeposits: no or verylittleporosity in mostcoatings Many differens metals: nickel, gold, silver, copper, cobolt, zinc and alloys. Excellent bonding: molecular bonding results in very god adhesion, all coatingscan be machined, ground or polished. Mobile equipment: the repair can be done on site www.ldc-brushplating.com

  3. LDC borstplätering • Retainingrings, part of generator for powerstation, silverplated. www.ldc-brushplating.com

  4. LDC borstplätering • Retainingrings, part of generator for powerstation, silverplated. www.ldc-brushplating.com

  5. LDC borstplätering Bus bar, contact rods for the power generating industry, gold and silver coated contact-surfaces for increased conductivity. www.ldc-brushplating.com

  6. LDC borstplätering On-site plating job, shafts to be restored www.ldc-brushplating.com

  7. LDC borstplätering • Electric rotor with bad / worn bearing / seal areas repaired to original size. www.ldc-brushplating.com

  8. LDC borstplätering • Electric rotor with bad / worn bearing / seal areas repaired to original size. www.ldc-brushplating.com

  9. LDC borstplätering • Endcover of cast iron or Aluminium with worn /mismachined bearing seat corrected by LDC nickel. www.ldc-brushplating.com

  10. LDC borstplätering • Worn shaft on a turbine wing in power plant, to be repaired. www.ldc-brushplating.com

  11. LDC borstpläteringTel: +46 248 17440 ldc@swipnet.se Onsite repair of 2  pieces of seal  surfaces on a compressor  shaft due to  local wear damage.Built with the LDC-2904 Copper Hi-speed 0.5 mm. www.ldc-brushplating.com

  12. LDC borstpläteringTel: +46 248 17440 ldc@swipnet.se Finished compressor  shaft to its original dimensions,  with a hard, dense  top layer of the LDC-2874 Nickel Tungsten. With a hardness of 58 Hrc www.ldc-brushplating.com

  13. LDC borstplätering • Bearing journals and sealareas can be repaired on a Turboshaft • Highly polished cylinders with damages is corrected by LDC plating www.ldc-brushplating.com

  14. LDC borstplätering • Propellershaft sleeve repaired on-site in England by LDC www.ldc-brushplating.com

  15. LDC borstplätering • Documented view of enlarged LDC-2807 Nickel layer, as part of quality control. www.ldc-brushplating.com

  16. LDC borstplätering • Typical document of approval for LDC in Sweden. www.ldc-brushplating.com

More Related