Tips to remember while operating mixing products

1. BEST USES OF CONCRETE-MIXERS ON CONSTRUCTION SITES Concrete mixers make the mixing process of concrete easier. It is necessary to mix concrete well in order to get the best results. This process is not possible through manual labor. Mixers are used for both small and large construction projects. The basic steps for using a concrete mixer will be the same, no matter what construction work is being carried out. Few tips must be remembered while operating these products. http://www.alustep.se/

2. PRECAUTIONS It is important to make use of long sleeves, gloves, closed shoes and safety shades when operating a concrete mixer. Users must not put their hands inside when the concrete mixer is in use. The construction site should be clear and it can help to put up warning signs to notify people about wet concrete.

3. PREPARATION The mixer must be set on a flat surface and close to water supply. It is important to understand the correct proportions of ingredients required to make concrete. Adding the right amount of water is essential when using a mixer. Overfilling the concrete mixer might result in making the concrete too dilute. It can help to mix the concrete in batches rather than making a large amount at one go.

4. CONSISTENCY Remember that the concrete must not be too wet or too dry. The concrete must be mixed well in order to achieve best result. Otherwise, it can get difficult to carry off the work well. Concrete must be mixed really well to allow smooth working around the mixer’s drum. Watch the consistency of the concrete carefully as the drum rotates; if it reaches the top of the drum before falling off, then it is an indication that concrete is dry. http://www.alustep.se/produkt-kategori/byggutrustning/