Important Tips to Remember While Installing Concrete Pavers

1. If you are planning to cover open areas like patios, driveway, walkways, and other outdoor areas, pavers is the best choice. Pavers offer you the right mix of aesthetic beauty, strength, durability, and innumerable design flexibility. Whether you are planning to install stone, concrete, or brick pavers, you should have enough knowledge about the installation process to get the best installation work at the minimum possible cost. If you are looking for an insured concrete paver contractor in Bronx or Queens you should keep these points in mind while installing concrete pavers. Points to Consider While Installing Pavers There is no denying the fact that pavers look exceptionally brilliant and admirable on installation day. But the quality of work could be judged only when your installation endures one good winter. No structure is built to last forever, but if you hire professional concrete or stone pavers in Queens, you can expect your paver installation to last longer than average. If you are not aware of steps to be followed for quality installation, then read further to know what experts say about quality paver installation in Bronx and Queens.

2. •Planning First Space planning is the first step towards getting quality pavers installed at the minimum possible cost. You can measure the area and draw the layout easily using graph paper and ask a professional paver installer to mark the area using spray paint to form an outline. Don’t forget the gradient or slope factor for better durability. •How Much Pavers Required Based on the measurement of length and width of the area to be paved you can find the square footage, thus the total number of pavers required to cover the surface. You should add 5 or 10% to the area to compensate for cuts to fit curves. •Excavation Planning The life of pavers depends on drainage, so you should pay attention to the height of the pavers and slope of the area to be covered. Based on the gradient, you can easily calculate the depth of excavation required. Your insured concrete paver contractor will do the digging, as required, and level and compact the ground using a suitable compacting machine. •Base Material The next important factor for durable paver installation is the laying base material, which consists of crushed rock of varying size and gravel. Be attentive to the thickness of base material, which depends on sub-base material, and weigh expectations. •Edge Restraints If edge restraints are not installed scientifically harsh weather, excess load, and traffic could move pavers. Discuss this with your paver installer and choose edge restraining material as per the climatic condition. •Sand Bedding Ideally, a concrete or stone paver installer in Bronx will lay bedding sand before laying the pavers. It helps in protecting sand joints from erosion. The best is to follow the standard paver installation process to get quality installation work. Laying Pavers While laying pavers as per design and pattern, keep them close together. If cutting is required, ask the insured concrete pavers contractor to use a suitable saw and chisel for perfection. On completion of lying, make sure your pavers installer must use a mechanical plate compactor for a smooth setting into the sand bedding.

3. Sealing Pavers Professional concrete pavers of Bronx will first clean and sweep the paved area and seal the area using suitable sand bedding sealant. It helps in the prevention of vegetation and the development of stains. Experienced concrete or stone pavers in Queens make sure pavers are installed as per plan. If installed professionally, you will see pavers endure the vagaries of nature with the lest possible maintenance. You can reduce the chances of damage if you could use sealant regularly to maintain color and appearance. Keep the pavers area clean to avoid stains. It is better to avoid power washing, as this could weaken joints.