1 / 24

MuP21 Microprocessor

MuP21 Microprocessor. Introduction to MISC. Post-RISC Era. There is no longer a clear distinction between RISC and CISC microprocessors. CISC (Complicated Instruction Computing), like the x86 family, persists due to upward compatibility.

frankstanley
Download Presentation

MuP21 Microprocessor

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MuP21 Microprocessor Introduction to MISC Microprocessors (V22.0480-002)

  2. Post-RISC Era • There is no longer a clear distinction between RISC and CISC microprocessors. • CISC (Complicated Instruction Computing), like the x86 family, persists due to upward compatibility. • RISC (Reduced Instruction Computing) has become much more complicated. • David Ditzel: • "The MIPS R10,000 and HP PA-8000 seem much more complex to me than today's standard CISC architecture, which is the Pentium II. So where is the advantage of RISC, if the chips aren't as simple anymore?" Microprocessors (V22.0480-002)

  3. Introducing MISC • Principles borrowed from RISC: • Simple instruction set is faster • Complicated memory accessing instructions are not necessary • Simpler processor is easier to design and to build • A desire to push the principle of simplicity to its limits. Microprocessors (V22.0480-002)

  4. MISC • Minimum Instruction Set Computing • What is the minimum set of instructions in a practical microprocessor? • Somewhere between 16 and 32 • A convenient choice is 32 which leads a microprocessor to 5 bit instructions. Microprocessors (V22.0480-002)

  5. MUP21 Chip • Highly integrated multiprocessor chip • Main CPU with video and memory coprocessor • Targeted for applications in video displays, CAD design, communication, video games, and embedded systems. Microprocessors (V22.0480-002)

  6. MuP21 Instruction Set • Only 24 5-bit instructions • Transfer Instructions: • JUMP, CALL, RET, JZ, JCZ • Memory Instructions: • LOAD, STORE, LOADP, STOREP, LIT • ALU Instructions: • COM, XOR, AND, ADD, SHL, SHR, ADDNZ • Register Instructions: • LOADA, STOREA, DUP, DROP, OVER, NOP Microprocessors (V22.0480-002)

  7. Missing Instructions • There is an ADD, but no SUB • Subtraction can be accomplished by taking the compliment (COM) and then doing addition. • There is XOR, but no OR • OR can be accomplished by compliment (COM), addition, and then XOR. • Like RISC, MISC avoids unnecessary instructions that can be synthesized from simpler instructions. Microprocessors (V22.0480-002)

  8. Instruction Format • 5-bits instructions corresponding to the 24 different instructions. • 4 instructions per each 20-bit word fed from memory. (natural instruction pipeline) • After 4 instructions are executed, the slower external memory is ready to supply the next set of 4 instructions. • The processor can be four times faster than the memory. Fast cache memory and the associated control circuitry are not needed. Microprocessors (V22.0480-002)

  9. Execution • Unlike RISC, which requires a 4 step execution due to the need to decode the instruction and select operand registers. • MISC needs only two step execution: • Read a 20-bit word from memory and latch it into the instruction latch. • Execute the 5-bit instructions by latching proper results into the T register. Microprocessors (V22.0480-002)

  10. MuP21 Architecture • First of a series of MISC microprocessor • Housed in a 40 pin DIP • Silicon die is less than 100 mils square • Result: • Constrained to a 20 bit microprocessor • Not enough I/O pins to support a processor with wider data and address buses. Microprocessors (V22.0480-002)

  11. MuP21 Architecture (Cont.) • Dual Stack based processor • Data Stack and Return Stack • More advantageous than a register based processor because the source and destination registers are defined in hardware and no register decoding is necessary. • However, stack compilers are not that efficient. • 21-bit CPU Core • Video Coprocessor • Memory Coprocessor Microprocessors (V22.0480-002)

  12. Primary Memory - DRAM • Advantage • DRAM offers the best bit density and lowest cost per bit • Disadvantage • Needs to boot from ROM or 8 bit memory devices • Needs to address various I/O devices • Result: • A memory coprocessor is required in order to handle the buses and to generate proper signals to memory and I/O devices Microprocessors (V22.0480-002)

  13. CPU Components • A Return Stack to nest subroutine return addresses • A Data Stack to store parameters passing between subroutines • A T (Top) Register as the central holding register for operands • An ALU which takes operands from T and the top of Data Stack and returns the results of ALU operation to T Register • An A (Address) Register to hold a memory address for fetching or storing data from/to memory • A PC (Program Counter) Register to hold the address of the next instruction • An Instruction Latch which holds four 5-bit instructions to be executed in sequence Microprocessors (V22.0480-002)

  14. ALU Execution • The ALU instructions can be executed very fast because operands are taken from the T register and the top of the data stack, and the results are returned to the T register. • Once the data in the T register on the top of the data stack are stable, ALU results from COM (of T), SHL, SHR, XOR, AND, ADD, and conditional ADD are generated spontaneously. • The ALU instruction only selects the proper results and gates them back into the T register. Microprocessors (V22.0480-002)

  15. Video Coprocessor • Runs in parallel with main processor to display video frames stored in the primary DRAM memory. • Reads 20 bits word from DRAM and interprets them as four 5 bits instructions. • Can generate NTSC or PAL signal to drive a color TV monitor. Microprocessors (V22.0480-002)

  16. Video Coprocessor - Instruction Set • 5-bit instruction format: 0 I G R B • I,G,R,B stands for intensity, green, red, and blue respectively • Instruction set for video processor: Opcode Hex Name Slot Cycles B 00 Black x 1 S 17 Sync x 1 R 1F Refresh 2 1 K 13 Skip 0 1 C 15 Burst x 1 P 0x Pixel x 1 J 18 Jump 0 0 Microprocessors (V22.0480-002)

  17. Memory Coprocessor • Mostly hidden from the user • Arbitrates DRAM access requests • The memory request from the video coprocessor has priority over that from the main CPU. • Generates the proper control signals to DRAM and SRAM memories as well as I/O devices. • Controls the address and data buses to the memory and I/O devices. • When accessing DRAM memory, the 20-bit addresses are multiplexed over pins A0-A9, and data bus consists of D0-D9 and AD10-AD19. • When accessing SRAM memory during booting, the address bus consists of A0-A9 and AD10-AD19, while the 8-bit data bus is on D0-D7. • When accessing I/O devices, the addresses are on A0-A9, and data are on D0-D9 and AD10-AD19. Microprocessors (V22.0480-002)

  18. Memory and I/O Access • Controlled by address lines and 2 bits in Configuration Register. • MuP21 maintains a 21 bits data/address bus. • Bit 20 is the carry bit in ALU operations. • Selects DRAM when low, and SRAM or I/O when high. Microprocessors (V22.0480-002)

  19. Memory Map • Memory map of memory and I/O devices: Address Device 0-FFFFF 20-bit DRAM memory 12000-1203FF Slow 20-bit I/O devices 14000 Configuration Register 16000-1603FF Fast 20-bit I/O devices 18000-1BFFFF Fast 8-bit SRAM memory 1C000-1FFFFF Slow 8-bit SRAM memory • According to the memory map, MuP21 addresses directly only 256 KB of SRAM memory. • However, Bits 18-19 in the Configuration Register are forced on the address bus when reading or writing SRAM. • This paging mechanism allows MuP21 to access 1 MB of external SRAM memory. Microprocessors (V22.0480-002)

  20. Performance • Executes instructions at a speed of 10ns per instruction. • Peak execution rate is thus 100 MIPS. • Accessing DRAM slows it to 80 MIPS. • The limited 24 instructions is adequate in implementing certain applications: • Quite elaborate operating systems • And demonstration programs Microprocessors (V22.0480-002)

  21. MISC Chips - Applications • Variety of potential application due to key design features like: • High speed, low power consumption, and large addressing space • Potential applications: • Advanced video games • TV signage • Video test pattern generators • CAD design system • Telephone switching system • Handheld computers • High speed communications systems • Intelligent hard disk controllersRobotic controllers Microprocessors (V22.0480-002)

  22. Improvement Possibilities • MuP21 runs at peak speed of 100 MIPS with 1.2 micron CMOS process. • Double speed with 0.8 micron or even triple with 0.5 micron technology. • Using a package with more pins than the 40 bit used in MuP21 can expand to 32 bits instead of 20 bits. • Wider data/address bus improves throughput Microprocessors (V22.0480-002)

  23. Next Generation MISC Chip • F21 microprocessor • Second generation VLSI design by Chuck Moore using OKAD. • Fabricated in 0.8 micron CMOS technology using the HP process at Mosis. • 68 pin PLCC package. • More information, visit: • http://www.ultratechnology.com Microprocessors (V22.0480-002)

  24. Conclusion • MISC microprocessor is simpler and more efficient than RISC and CISC. • Consumes less power when running at equivalent speed. • MISC processor is cheaper than RISC and CISC in terms of price/performance ratio. Microprocessors (V22.0480-002)

More Related