1 / 20

NIKON NPL-332 TOTAL STATION

NIKON NPL-332 TOTAL STATION. CE 201 ENGINEERING SURVEYING. NIKON NPL-332 TOTAL STATION. SETUP INSTRUMENT: Turn On. Rotate Alidade. Tilt Telescope. NIKON NPL-332 MEASUREMENT SETTINGS. MSR1 or MSR2 Hold down key for 1 sec Target – N-Prism/ Prism Const – 30 mm

gage-robles
Download Presentation

NIKON NPL-332 TOTAL STATION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NIKON NPL-332 TOTAL STATION CE 201 ENGINEERING SURVEYING

  2. NIKON NPL-332TOTAL STATION • SETUP INSTRUMENT: • Turn On • Rotate Alidade • Tilt Telescope

  3. NIKON NPL-332MEASUREMENT SETTINGS MSR1 or MSR2 Hold down key for 1 sec Target – N-Prism/Prism Const – 30 mm Mode – Normal/Precise Ave – 0 to 99 - 3 Rec – Confirm/All/ MSR

  4. 1: Angle VA Zero : Vert = 0 ANG Reso: 1”/5”/10” HA: 0 to BS/AZIMUTH 2: Dist Scale: 1.00000 T-P: On Sea Level: On C&R: 0.132 3: Coord. Cord.: NEZ/ENZ Label: XYZ/YXZ/NEZ AZ ZERO: North 4: Power Main: OFF EDM: OFF Sleep: OFF 7: Units Angle: DEG Dist: US-FT Input: decimal-Ft Temp: degF Press: inHg 8:Recording 9: Other Settings XYZ disp 2nd Unit Sig Beep Split St. CD Input Owner Detail NIKON NPL 332INITIAL SETTINGS MENU 3: Settings

  5. NIKON NPL 332 • HOT KEY: • 1: HT - Input Height of Target • 2: T-P - Input Temperature & Pressure • 3: Target = Prism30 mm - Prism Offset • 4: Notes = 50 characters • BUBBLE INDICATOR: (0) KEY • Graphical Check

  6. NIKON NPL 332 • MEASURING DISTANCE • Sight Target • Press MSR1 or MSR2 • if ave. count = 0, cont. measurement • if ave. count set to >0 , SDx • DISPLAY - DSP Key • toggle between displays: • 1/4, 2/4, 3/4, 4/4

  7. NIKON NPL 332 • HORIZONTAL ANGLE • ANGLE KEY • 1: 0-Set • 2: Input – ddd.mmss • 3:Rept – angle repetitions • 4:F1/F2 – Face Left/Right • 5:Hold – hold horizontal angle

  8. NIKON NPL 332 • RDM: Remote Distance Measurement • Indirect Distance Measurement • PROGRAMS (4 Key) • CONTINUOUS (4)

  9. Difference between “3:RDM(Radial)” & “4:RDM (Cont.)” NIKON NPL 332Remote Distance Measurement

  10. NIKON NPL 332 • DISPLAY • Sight 1st Pt • MSR1 or MSR2 • Sight 2nd Pt • MSR1 or MSR2 MAGNETIC AZIMUTH

  11. NIKON NPL 332 • REM: REMOTE ELEVATION MEASUREMENT • PROGRAMS (4 Key) • REM (5)

  12. NIKON NPL 332 • REM: REMOTE ELEVATION • Enter HT – Target Height • Sight Target • MSR1 • Sight Vertical Point • Read Vh

  13. NIKON NPL 332 • JOB SETUP • MENU 1: JOB • OPEN EXISTING JOB - enter • Or • CREATE NEW JOB • 8 Characters - GRP # • Enter – Create Job • Abrt (Soft Key) • Sett (Soft Key) • OK (Soft Key) * = Current Job

  14. OLIN STATION 10 ENTRANCE NIKON NPL 332 • STATION: STN / 7 KEY • 1: Known • ST: Enter Station Pt -10 • INPUT N,E,Z • N = 1,000.00 • E = 1,000.00 • Z = 100.00 • HI = ________ • CD = _______

  15. NIKON NPL 332 OLIN • STATION • BACK SIGHT • 2: ANGLE • BS PT - No Entry • AZ – Mag Azimuth – Flag Pole • SIGHT BS & ENT STATION 10 ENTRANCE

  16. HMU #4 STATION 11 FIRE #101 STATION 10 STATION 12 STATION 13 • POINT GUIDANCE • Traverse Points – Single Digit • Instrument/Setup Pts – Double Digit • Sideshots/BM – Triple Digits B-BALL #5 MILLER #3 OLIN #2 ENTRANCE #1 ENTRANCE #7 PARKING #6

  17. NIKON NPL 332 OLIN • Bench Mark Survey • STN / 7 KEY • 4: RBM Input BM Point – (Flag Pole) • PT= 0 - Enter • N = No Entry • E = No Entry • Z = 561.00 HT= ________ CD = FLAG STATION 10 ENTRANCE • Sight Benchmark • MSR • ENT • HI ______

  18. NIKON NPL-332POINT SURVEY • SIGHT POINT • MSR1 • RECORD PT _____ • CD _____ • ENT Comments Left Cursor – Delete Entry Right Cursor – Overwrite Mode Auto Point Advance = Next Pt = Pt =1

  19. HMU NIKON NPL 332 STATION 11 • New Instrument Station • STN / 7 KEY • 2: RESECTION • PT: 1ST POINT • Input Point # – ENTER • HT • Sight 1st POINT • MSR • PT: 2ND POINT • Input Point # – ENTER • HT • Sight 2nd POINT • MSR B-BALL MILLER OLIN ENTRANCE PARKING

  20. HMU NIKON NPL 332 STATION 11 • New Instrument Station • (Continued) • N (small number good) • E (small number good) • Z (small number good) • REC • ST 11 • HI ______ • CD STATION 11 • BS _____(Default 1st PT) • ENT B-BALL MILLER OLIN ENTRANCE PARKING

More Related