270 likes | 284 Views
Lab 09-5 ONLINE LESSON. If viewing this lesson in Powerpoint Use down or up arrows to navigate. Universal Transverse Mercator UTM. Similar to latitude and longitude…UTM involves the intersection of lines of reference….
E N D
If viewing this lesson in Powerpoint Use down or up arrows to navigate
Similar to latitude and longitude…UTM involves the intersection of lines of reference…
Instead of the references latitude and longitude…easting and northing is used…
Planet earth is divided into 60 zones that are in concert with lines of longitude
Each of these zone lines are 6 degrees apart…and are designated zones 1 to 60…these are easting values…
There are also latitude bands that are 8 degrees apart and are designated C to X…I and O are omitted…these are northing values
The “10S” zone and band are further divided into 1000 meter squares that are used for navigation…
This is the easting coordinate This is the northing coordinate
To find the position of the Wells use the zone and band designator 10S…
To find the wells coordinates…start with the easting value of 603000
Place the UTM guide at the bottom of the square in which the target is located…
Since this is a square that is 1000 meters square, 8 will represent 800 meters…add this to 603000 and the easting value is 603800…
To find the northing place the UTM guide along the right edge of the square in which the target is located
Since this is a square that is 1000 meters square, 7.5 will represent 750 meters…add this to 4171000 and the northing value is 4171750…
So the complete UTM coordinate of Wells is 10S 603800 4171750!
Zone and band easting northing 10S 603800 4171750