1 / 47

Issues in Wireless Physical Layer

Issues in Wireless Physical Layer. A. Chockalingam Assistant Professor Indian Institute of Science, Bangalore-12 achockal@ece.iisc.ernet.in http://ece.iisc.ernet.in/~achockal. Outline. RF Spectrum Issues Wireless Channel Characteristics Combating Fading Diversity Techniques

garrison-jennings
Download Presentation

Issues in Wireless Physical Layer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Issues in Wireless Physical Layer A. Chockalingam Assistant Professor Indian Institute of Science, Bangalore-12 achockal@ece.iisc.ernet.in http://ece.iisc.ernet.in/~achockal

  2. Outline • RF Spectrum Issues • Wireless Channel Characteristics • Combating Fading • Diversity Techniques • Transmit Diversity • Multiple Access • Power Control • Co-channel Interference • Ultra Wideband Techniques Dept of ECE, IISc, Bangalore

  3. Radio Frequency Spectrum • Communication through electromagnetic wave propagation • Frequency Spectrum • Certain ranges of frequency • Only certain frequency spectra are usable • Limitations of atmospheric propagation effects • Technology/Device limitations • Regulatory issues • Safety hazards • Demand for spectrum far exceeds supply • Efficient use of RF spectrum is important Dept of ECE, IISc, Bangalore

  4. RF Spectrum - Some Current systems • 900 MHz Cellular Band • GSM: 890 - 915 MHz Uplink; 935 - 960 MHz Downlink • IS-54: 824 - 849 MHz Uplink; 869 - 894 MHz Downlink • PDC: 810 - 820 MHz and 1429 - 1453 MHz Uplink 940 - 960 MHz and 1477 - 1501 MHz Uplink • IS-95: 824 - 844 MHz Uplink; 869 - 889 MHz Downlink • 1800 MHz PCS Band • 1850 - 1910 MHz Uplink; 1930 - 1960 MHz Downlink • DECT: 1880 - 1900 MHz • C, Ku, L and S-Bands for SATCOM • C-band: 5.9 - 6.2 GHz Uplink; 3.7- 4.2 GHz: Downlink • Ku-band: 14 GHz Uplink; 12 GHz Downlink • L-band: 1.61 - 1.6265 GHz; S-band: 2.4835 - 2.5 GHz Dept of ECE, IISc, Bangalore

  5. Unlicensed Radio Spectrum Carrier wavelength: 33 cm 12 cm 5 cm 26 MHz 83.5 MHz 200 MHz 5.35 MHz 2.4 GHz 902 MHz 5.15 GHz 2.4835 GHz 928 MHz • Wireless LANs • Cordless phones • 802.11b • Bluetooth • Microwave Oven • 802.11a Dept of ECE, IISc, Bangalore

  6. RF Spectrum • Some forward looking developments • 300 MHz BW in the 5 GHz band made available to stimulate Wireless LAN technologies and use • Ultra wideband (UBW) technology • 60 GHz band for high-speed, short-range communications Dept of ECE, IISc, Bangalore

  7. Physical Layer Tasks • Wireless systems need to overcome one or more of the following distortions: • AWGN (receiver thermal noise) • Receiver carrier frequency and phase offset • Receiver timing offset • Delay spread • Fading (without or with LOS component) • Co-channel and adjacent interference (CCI, ACI) • Nonlinear distortion, intermodulation, impulse noise Dept of ECE, IISc, Bangalore

  8. Motivation for PHY Layer Advances • Increase channel capacity (spectral efficiency) - higher average bit rate • Increase Erlang Capacity - more users per square area • Increase reliability • Reduce Tx power • Increase range • Increase coverage Dept of ECE, IISc, Bangalore

  9. PHY Layer Advances Erlang Capacity Spectral Efficiency Transmit Diversity Spatial Multiplexing OFDM Sectorisation Link Adaptation Space-Time Coding Variable Bit-Rate Voice Activity Detection Transmit Diversity Frequency Hopping Receive Diversity Smart Beam-forming Turbo Coding Interference Suppression DS-CDMA Fixed Beamforming Power Control Range (Power Efficiency) Multi-user Detection Dynamic Channel Selection Dept of ECE, IISc, Bangalore

  10. Wireless Channel Characteristics • Free-space Transmission ( ) Rx Tx Dept of ECE, IISc, Bangalore

  11. Mobile Radio Channel • Characterized by • Free space (distance) loss • Long-term fading (shadowing) • Short-term fading (multipath fading) Dept of ECE, IISc, Bangalore

  12. Mobile Radio Channel Short Term Fading 0.1 - 1 m (10 - 100 msecs) Received Power Distance Loss Long Term Fading 10 - 100 m (1 - 10 secs) Distance, d Dept of ECE, IISc, Bangalore

  13. Distance Loss • In line-of-sight AWGN channels (AWGN: Additive White Gaussian Noise) • distance loss ,: distance between Tx and Rx • loss exponent is 2(i.e., 20 dB/decade loss) • In urban mobile radio channels • loss exponent varies between 2.5 to 5.5 • 40 dB/decade loss (typ)Rx Signal power (Based on field measurements) • Slowly varying compared to carrier wavelength • Fwd & Rev links impacted in the same way 40 dB 40 dB/decade 40 dB 1 km 10 m 100 m Dept of ECE, IISc, Bangalore

  14. Shadowing • Signals are blocked by obstacles (e.g., bridges buildings, trees, etc) • Shadow loss variation - typ log-normally distributed (Std Dev of distribution: 4 to 12 dB) • Slowly varying compared to carrier wavelength • Fwd & Rev links impacted in the same waybri Dept of ECE, IISc, Bangalore

  15. Multipath Propagation Base Station Tx. signal Rx. signal Channel Path 1 Path 2 Impulse Response Path n Mobile Frequency Response Dept of ECE, IISc, Bangalore

  16. Multipath (Short term) Fading • Time-varying impulse response • Fluctuations in received signal amplitude (typically Rayleigh distributed) • Time spread • Doppler Spread • Fade variations are fast • Rev link fading independent of Fwd link fading Signal Strength Rev link fade Fwd link fade time Dept of ECE, IISc, Bangalore

  17. Key Multipath Parameters • Delay / Frequency Characterization • Delay spread, • Coherence BW, • Time variations • Coherence time, • Doppler BW, Dept of ECE, IISc, Bangalore

  18. Delay Spread / Coherence BW • Autocorrelation function of • If we let , gives the average power output of the channel as a function of Autocorrelation FT Max. Delay Spread FT Pair Coherence Bandwidth Dept of ECE, IISc, Bangalore

  19. Delay / Frequency Characterization • Delay Spread • range of differential delay between different paths • jitter in Rx time of the signal, long echoes • results in Inter-Symbol Interference (ISI). • Need equalization to combat ISI(in unspread systems) • Provides “time Diversity” in spread systems (RAKE Combining in CDMA) • Coherence BW • BW over which fade remains constant or have strong amplitude correlation Dept of ECE, IISc, Bangalore

  20. Delay / Frequency Characterization • Frequency non-selective fading • Coherence BW > Signal BW • Frequency selective fading • Coherence BW < Signal BW: Dept of ECE, IISc, Bangalore

  21. Time Variations • Coherence Time • Time over which fade remains constant or have strong amplitude correlation • Coherence time > symbol time : Slow fading • Coherence time < symbol time : Fast fading • Doppler BW • frequency shift on the carrier frequency due to relative motion between Tx and Rx • depends on user velocity and carrier wavelength • Note: Dept of ECE, IISc, Bangalore

  22. Doppler Bandwidth : mobile velocity : carrier wavelength : carrier frequency ForMHz, m Km/h, Hz • Larger Doppler Bandwidth necessitates • Larger power control control update • rates in CDMA • Faster converging algorithms when • adaptive receivers are employed Dept of ECE, IISc, Bangalore

  23. Effect of Fading Fading AWGN Non-fading AWGN Channel: falls exponentially with increasing SNR Fading Channel: falls linearly with increasing SNR Dept of ECE, IISc, Bangalore

  24. Combating Fading Effects • Diversity techniques • Provide the receiver with multiple fade replicas of the same information bearing signal • Assume independent diversity branches • If denote the probability that the instantaneous SNR is below a given threshold on a particular diversity branch • Then, the probability that the the instantaneous SNR is below the same threshold on diversity branches is Dept of ECE, IISc, Bangalore

  25. SISO to MIMO • Single Input Single Output (SISO) • LOS point-to-point links • Single Input Multiple Output (SIMO) • Receiver diversity • Multiple Input Single Output (MISO) • Transmit diversity • Space time transmission • Multiple Input Multiple Output (MIMO) • Multiple transmitting and multiple receiving antennas Dept of ECE, IISc, Bangalore

  26. Receive Diversity Techniques • Several methods by which receive diversity can be achieved include • Space diversity • Time diversity (coding/interleaving can be viewed as a efficient way of time diversity) • Frequency diversity (multiple channels separated by more than the coherence BW) • Multipath diversity (obtained by resolving multipath components at different delays) • Angle/Direction diversity (directional antennas) • Macro diversity Dept of ECE, IISc, Bangalore

  27. Receive Diversity Combining • Method by which signals from different diversity branches are combined • Predetection Combining • Postdetection combining • With ideal coherent detection there is no difference between pre- and postdetection combining • With differentially coherent detection, there is a slight difference in performance Dept of ECE, IISc, Bangalore

  28. Receive Diversity Combining • Maximal Ratio Combining (MRC) For BPSK: • Equal Gain Combining (EGC) • Selection Combining (SC) where • Generalized Selection Combining (GSC) • Switch and Stay Combining (SSC) Dept of ECE, IISc, Bangalore

  29. Diversity Performance Fading (L=1) L=2 AWGN L=3 L=4 Average SNR • Diversity gain is maximum when the diversity branches are • uncorrelated. • Correlation between diversity branches reduces diversity gain • Diversity gain is greater for Raleigh fading than for Ricean Dept of ECE, IISc, Bangalore

  30. Transmit Diversity • Issue: Receive diversity at the mobile is difficult because of space limitations • Using multiple transmit antennas at the base station with a single receive at the mobile can give same diversity benefits • Tx. Diversity schemes • with feedback from the mobile • without feedback from the mobile Dept of ECE, IISc, Bangalore

  31. Transmit Diversity Tx Rx Dept of ECE, IISc, Bangalore

  32. Spatial Multiplexing • Use N Tx antennas and M Rx antennas (N < M) • by sending N symbols at a time Rx Tx Channel Matrix Dept of ECE, IISc, Bangalore

  33. Co-channel Interference • Frequencies reused in different cells to increase capacity • Reuse Distance: • Minimum distance between cells using same frequencies • Cell Radius: • Reuse Ratio: Dept of ECE, IISc, Bangalore

  34. Co-channel Interference • S/I : Signal-to-Interference Ratio • For same size cells, co-channel interference (CCI) becomes a function of and • Increasing reduces CCI : path loss exponent (=4 typ) : No. of co-channel cells • S/I required = 18 dB (typ) => cluster size N > 6.49 • For 7-cell reuse (N= 7), S/I = 18.7 dB Dept of ECE, IISc, Bangalore

  35. Co-Channel Interference • In FDMA/TDMA CCI determines the reuse distance • In CDMA, CCI affects the number of users supported by a BS • CCI can be reduced by • Sectorization • Power Control • Discontinuous Transmission • Frequency Hopping • Multiuser detection Dept of ECE, IISc, Bangalore

  36. Multiple Access • FDMA • AMPS • TDMA • GSM, EDGE, DECT, PHS • CDMA • IS-95, WCDMA, cdma2000 • OFDM (can be viewed as a spectrally efficient FDMA) • 802.11a, 802.11g, HiperLAN, 802.16 Dept of ECE, IISc, Bangalore

  37. OFDM Tones Carriers Power Frequency Time-slots Time Dept of ECE, IISc, Bangalore

  38. DS-CDMA vs OFDM Tx. signal Rx. signal Channel CDMA attempts to exploit “time-diversity” through RAKE receiver Impulse Response OFDM attempts to exploit “frequency-diversity” by frequency slicing Frequency Response Dept of ECE, IISc, Bangalore

  39. RAKE Receiver H*(f) Carrier L-Parallel Demodulators 90 H*(f) Dept of ECE, IISc, Bangalore

  40. RAKE Finger nTc H*(f) Carrier Initial timing from searcher Pilot Sequence Despreader Pilot Seq Tracking Loop (Early-Late Gate) 90 nTc H*(f) Dept of ECE, IISc, Bangalore

  41. Power Control • To combat the effect of fading, shadowing and distance losses • Transmit only the minimum required power to achieve a target link performance (e..g, FER) • Minimizes interference • Increases battery life • FL Power Control • To send enough power to reach users at cell edge • RL Power Control • To overcome “near-far” problem in DS-CDMA Dept of ECE, IISc, Bangalore

  42. Power Control • Types of Power Control • Open Loop Power Control • Closed loop Power Control • Open Loop Power Control (on FL) • Channel state on the FL is estimated by mobile • RL Transmit power made proportional to FL channel Loss • Works well if FL and RL are highly correlated • which is generally true for slowly varying distance and shadow losses • but not true with fast multipath Rayleigh fading • So open loop power control can effectively compensate for distance and shadow losses, and not for multipath fading Dept of ECE, IISc, Bangalore

  43. Power Control • Closed Loop Power Control (on RL) • Base station measures the received power • Compares it with the desired received power (target Eb/No) • Sends up or down command to mobile asking it to increase or decrease the transmit power • Must be performed fast enough a rate (approx. 10 times the max. Doppler BW) to track multipath fading • Propagation and processing delays are critical to loop performance Dept of ECE, IISc, Bangalore

  44. Ultra wideband (UBW) Techniques • Impulse Radio Tx (Marconi’s century old radio tx) has now emerged under the banner `ultrawideband • Reason: • mature digital techniques • practicality low power impulse radio communications • UWB • Tx and Rx of ultra-short (sub-nanosecs) electromagnetic energy impulses (or monocycles with few zero crossings) • FCC’s definition of UWB: • BW’s greater than 1.5 GHz or • or BW’s greater than 25% of the center frequency measured at 10 dB down points Dept of ECE, IISc, Bangalore

  45. UWB • Modern UWB radio is characterized by • very low effective radiated power (sub-mW range) • extremely low power spectral densities and wide bandwidths (> 1GHz) • EIRP < -41.25 dBm/MHz, with restrictions in bands below 960 MHz, between 1.99 and 10.6 GHz Dept of ECE, IISc, Bangalore

  46. UWB • Ways of generating signals having UWB characteristics • TM-UWB • Time modulated impulse stream • DS-UWB • continuous streams of PN-coded impulses (resemble CDMA signaling) • employ a chip rate commensurate with the emission center frequency • TRD-UWB • employs impulse pairs that are differentially polarity encoded by the data Dept of ECE, IISc, Bangalore

  47. UWB Capabilities • High spatial capacity • High channel capacity and scalability • Robust multipath performance • Very low transmit power • Location awareness and tracking Dept of ECE, IISc, Bangalore

More Related