1 / 23

Updated: April 2010

STM-1 (Optical/Electrical) Add-Drop Multiplexer Product Presentation. Orion Telecom Networks Inc. - 2010. Updated: April 2010. Product Overview.

garzae
Download Presentation

Updated: April 2010

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. STM-1 (Optical/Electrical) Add-Drop Multiplexer Product Presentation Orion Telecom Networks Inc. - 2010 Updated: April 2010

  2. Product Overview • STM-1 (Optical / Electrical), E1 and Ethernet Multi-Service SDH Transmission Unit is a modular platform unit with two 155.52Mbps optical / electrical interfaces • Used in a point-to-point, chain or ring application to provide an ultra-compact, cost effective and flexible multi-service platform • Interface card options include the 8xE1 interface card (120 Ohms [RJ-45] and 75 Ohms [BNC]), 4x100BaseT Ethernet interface card (1 VCG, 4 Ports 1 Channel) and 4x100BaseT Ethernet interface card (4 VCG, 4 Ports 4 Channels) options along with Engineering Order Wire • The user removable / replaceable STM-1 Optical / Electrical interface option makes it easy to meet various and changing user requirements • Provides full capability to cross-connect at E1 level between all tributaries • Used as Terminal Multiplexer (TM) or an Add-Drop-Multiplexer (ADM) to build a point-to-point, ring and chain (add-drop) transmission network.

  3. Features and Highlights • 1U height, 19-Inch standard rack-mountable chassis • Service interfaces • 2 x STM-1 optical interfaces, MSA compliant SFP (pluggable) optical module (LC connector) based design, which supports onsite optical port replacement • 2 x STM-1 electrical interfaces, SFP electrical module (Mini BNC connector) Optional • Maximum 16 E1 interfaces compliant with ITU-T G.703 (8 E1 interfaces per card) • 120 Ohms E1 and 75 Ohms E1 interfaces options available • 4 x 10/100BaseT Ethernet (electric) interface • 10/100BaseT (FE) Ethernet Interface Options • 4 Ports, 4 Channels (4 VCG), and • 4 Ports, 1 Channel (1 VCG).

  4. Features and Highlights • 1 x GigE (Gigabit) Ethernet interface Options • Optical GigE (Gigabit) Ethernet interface • Electrical 1000BaseT (Gigabit) Ethernet Interface • Provides complete diagnostics facilities to the user for monitoring optical ports • Provide reading of optical transmit power, optical receive power, laser temperature, bias current in voltage alarms etc. • Performance Monitoring and Alarms - Error counts for B1, B2, B3 • Performance Analysis - Error Seconds (ES), Several Error Seconds (SES), Unavailable seconds (UAS), Higher Order Virtual Container - Remote Error Indication (HOVC-REI), Higher Order Virtual Container - Pointer Justification Event (HOVC-PJE).

  5. Features and Highlights • Management and Maintenance interfaces • 10/100BaseT Ethernet management interface • RS232 serial management interface • Remote (Telnet) management interface • Windows XP based Graphical User Interface (GUI) • Windows 7 based Graphical User Interface (GUI) • SNMP V2 Monitoring. • Engineering Order Wire (EOW) interface (RJ-11) • NMS (Network Management System) for monitoring multiple units from a single / central location.

  6. Features and Highlights • Timing mode • Synchronization with STM-1 line timing • Synchronization with timing from any of the E1 interfaces (1-16 E1 tributary interfaces) • External timing source - 120 Ohms 2MBps (External Bits Clock) - Factory Configurable • External timing source - 120 Ohms 2MHz (External TTL Clock) - Factory Configurable • Internal Clock - ITU-T G.813 internal oscillator (Stratum 3) • The timing source can be auto-switched according to default or operator programmed settings.

  7. Features and Highlights • Ethernet Standards Conformity • Generic Framing Procedure GFP-F compliant with ITU-T G.7041 • VCAT compliant with ITU-T G.707 and LCAS compliant with ITU-T G.7042 • Ethernet flow control on WAN port and LAN port. • Large buffer size upto 410,000 bytes • Maximum Frame length (MTU size):1552 bytes with Gigabit Ethernet Card • Maximum Frame length (MTU size):1536 bytes with 4 port 1 channel(1 VCG) Ethernet Card • Maximum Frame length (MTU size): 2036 bytes with 4 port 4 channel(4 VCG) Ethernet Card • Electrical Gigabit compliant with 802.3ab • Optical Gigabit compliant with 802.3z • Auto MID/MID-X for Ethernet Interfaces • Support 802.1Q based VLAN tagging.

  8. Features and Highlights • Support Port based VLAN tagging • Performance Analysis • All Received Packets • All Transmitted Packets • Received Dropped Packets • Supports 1+1 Line Protection and Automatic Protection Switching (APS) with less than 50ms recovery • Supports point-to-point, ring and chain topology (4 VCG card only) • Local management and network-based management via a unified platform • Supports Remote Power Down Detection and Auto Laser Shutdown • Supports STM-1 and E1 loop-back for troubleshooting • 850nm multi-Mode, 1310nm Single Mode and 1550nm Single Mode optical interface options offered • Ethernet mapping adopts GFP/VC-12 virtual concatenated technology; according with MSTP criterion.

  9. Features and Highlights • Provides Ethernet over SDH mapping through standard GFP and VC-12 virtual concatenation (VCAT) • Ethernet bandwidth can be adjusted by the user between 2MBps ~126 Mbps (VC-12 mapping) • Supports MAC Address list filtration, learning and updating function • Easy to operate • Redundant power supply card options AC+DC, DC+DC and AC+AC • 110V AC - 240V AC (50/60 Hz) power options available • -48VDC power option available • -24VDC power option available • Power consumption less than 17W.

  10. Alarm and Indicator Monitoring • Power Indicator • Current Status (integrity and activity) Indicator • Urgent Alarm Indicator • Minor Alarm Indicator • Optical Signal Loss Alarm Indicator • Remote Device Power-down Indicator • E1 and Ethernet Card Status Indicator • General Alarm Indicator for E1 and Ethernet Card (including Loss of signal of E1 Port and Link-down of Ethernet Port) • Auto Laser Shutdown (ALS) Indicator • Engineering Order-Wire (EOW) Indicator • Ethernet Link Indicator • Ethernet Speed Indicator • Dry contact via 9-pin, D-type male connector • Buzzer Alarm • SNMP Diagnostic and Monitoring.

  11. Application Diagram Point to point Network 10/100Base T Ethernet 10/100Base T Ethernet PC PC STM-1(Optical/Electrical) Add-Drop Multiplexer STM-1(Optical/Electrical) Add-Drop Multiplexer Fiber E1 E1 E1 Multiplexer E1 Multiplexer

  12. Application Diagram Chain Network STM-1(Optical/Electrical) Add-Drop Multiplexer STM-1(Optical/Electrical) Add-Drop Multiplexer STM-1(Optical/Electrical) Add-Drop Multiplexer PC PC PC E1 Multiplexer E1 Multiplexer E1 Multiplexer

  13. Application Diagram E1 Multiplexer PC/Server Ring Network A B STM-1 (Optical/Electrical)Add-Drop Multiplexer PC/Server PC/Server B A A B STM-1 (Optical/Electrical)Add-Drop Multiplexer B A E1 Multiplexer E1 Multiplexer PC/Server E1 Multiplexer

  14. Front Panel Description

  15. Switches ADDRESS NE / EOW (Phone) address switch MUTE Alarm speaker mute / unmute switch LED Indicators PWR (Green) Power indicator RUN (Green) Running indicator UALM (Red) Urgent alarm indicator DALM (Yellow) Minor alarm indicator NOP A/B (Red) Optical / electrical signal loss Alarm indicator RPD A/B (Yellow) Remote device power-down indicator CARD1/2/3 (Green) Corresponding card existing status indicator TALM1/2/3 (Red) Corresponding cardgeneral alarm indicator ALS (Green) Auto Laser Shut enable / disable status indicator BUSY (Green) EOW (Phone) status indicator

  16. Access Interfaces CONSOLE (RJ-45) Serial network management interface for CLI management EMU (RJ-45) Ethernet network management interface Optical Interfaces OPTA SFP based optical / electrical interface A OPTB SFP based optical / electrical interface B External Alarm (U/DALMO) Interface U/DALM (DB-9) Urgent (major) and differed (minor) external alarm interface

  17. User Channel (RS232) Interface RS2322 (RJ-45) User channel interface, RS232 level, used to transmit the collected alarm information of the telehouse, the user control information and etc. EOW Interfaces EOW Interface (RJ-11) Engineering Order Wire (Phone) interface, Ordinary telephone set with two line mode can be used. External Management / Timing Interfaces ETS1/ETS2 (RJ-45) Two external timing source interfaces EXM1/EXM2 (RJ-45) Two external management interfaces

  18. Rear Panel Description

  19. AC and DC Power Supply Power Slot Two power card slots, one for 110V AC - 240V AC (50/60 Hz), the other is -48V DC. Two different cards (AC+DC) or two same cards (AC+AC, DC+DC) can be inserted into the device simultaneously. Power Switch ON / OFF switch, '1': Power ON, '0': Power OFF. E1 Options SOCKET 1/2 E1 Card options, Option 1 – 8 E1 - 120 Ohms (DB-37 to 8 x RJ-45 provided with system) – Standard configuration Option 2 – 8 E1 - 75 Ohms (DB-37 to 16 x BNC provided with system).

  20. Ethernet Options SOCKET 3 Ethernet Card options, Option 1 – 4 Ethernet ports, 4VCG (4 x RJ-45 port, 4 channel) – Standard configuration Option 2 – 4 Ethernet ports, 1VCG (4 x RJ-45 port, 1 channel) Option 3 – Electrical 1000BaseT (Gigabit) Ethernet Interface (2 x RJ-45) Option 4 – Optical GigE (Gigabit) Ethernet interface (1 SFP based optical Gigabit Ethernet).

  21. Management Options • Easy to use CLI commands through RS232 serial connection and TCP/IP TELNET connection • SNMP V2 Management through MIB browser • DIP switch settings given on front panel • Windows XP / Windows 7 based GUI (Graphical User Interface) to access the equipment over RS232 serial connection, TCP/IP and SNMP protocol. Alarms and Indicator Monitoring • SNMP based Alarms (TRAPS) event monitoring through MIB browser and NMS • Visual alarm indicators in the front panel • Ethernet (Data) port speed and mode status • Real time Buzzer alarm for any alarm event.

  22. NMS (Networks Management System) built in GUI • Monitoring and Managing multiple systems from a central location over RS232 serial connection (Local), TCP/IP TELNET and SNMP Protocol (LAN or Remotely)

  23. Thank you for your attention For more details visit us at our Website at http://www.oriontelecom.com Headquarters: Phoenix, Arizona Orion Telecom Networks Inc. 16810, Avenue of the Fountains, Suite # 108, Fountain Hills, AZ 85268 U.S.A. Phone: +1 480-816-8672, Fax: +1 480-816-0115 E-mail: sales@oriontelecom.com Website: http://www.oriontelecom.com Regional Office: Miami, Florida Orion Telecom Networks Inc. 4000 Ponce de Leon Blvd. Suite 470, Coral Gables, FL 33146, U.S.A. Phone: 1-305-777-0419, Fax: 1-305-777-0201 E-mail: sales@oriontelecom.com Website: http://www.oriontelecom.com

More Related