Corporate VPN Provisioning & Level-1 Support

1. Corporate VPN Provisioning & Level-1 Support

2. Important information in Repository • City • Client • Area codes/ Phone number • Username / Password • VPI/VCI • Tagin/Tagout /F-S-P • Card-Port ONU cases • Device IP • Client IP Address • PIE & Core end RT:RD

3. Client End Configuration Check LAN IP assigned and ping response received LAN IP Assigned From DHCP or Manually Assigned to System Important Checks: ADSL Light status Check LAN cable /Local Area disconnected

4. Client End Configuration Cont… Manually Configured IP Address DHCP Enabled

5. Client End Configuration Cont… APIPA MS windows Feature 169.254.0.1 to 169.254.255.254 DHCP Failover Mechanism DHCP Server not working Not exist in WinNT How to resolve this Issue?

6. NAT Enable Backend Parameters Framed IP Address Uni-Sphere Virtual Route Framed IP Address exist in routing table Translation Required Not sure about Private network Private IP not routed

7. NAT Disable Backend Parameters Framed IP Address Uni-Sphere Virtual Route Framed Route LAN IP no need translation Check in routing Table

8. Remote Access Enable Features Http Telnet Ping Snmp Ftp Icmp Tftp

9. Modem WAN Setting Check Selected PVC (7) VPI/VCI Protocol PPPOE/Bridge Username/Password

10. Line Parameters • SNR • more than 6 • Attenuation • Greater < Speed • 50-60dB > Experienced disconnectivity • RATE • Upload • Download

11. Operations and Maintenance

12. Operations and Maintenance Consol 192.168.1.1 Click Quick Setup and Go Next

13. Operations and Maintenance Select PPPoE /PPPOA.

14. Operations and Maintenance Username/Password VPI/VCI NAT

15. Operations and Maintenance

16. Operations and Maintenance Step: Click Advance  LAN Replace LAN IP Address with your G.W Set Range of Start IP n End IP Save setting Also Click Advance  FirewallDisable it

17. Operations and Maintenance In Access Control  Set interface on Both Save setting Refresh Page

18. Thank You