Curtains Question 1 & 2 by GetGoodGrade.com

1. Surname 1 Author Tutor Course Date Curtains Question 1 & 2 Question One There are several measurements that are required when estimating the quantities of fabric. The three most important measurements include Drop, Length of track, and Width of fabric. Drop Drop refers to the amount of times that a strip of fabric has to conjoin to suit its purpose such as cover a window in the case of a curtain. Drop is relevant in fabric measurement due to the fact that the amount of price charged for serving curtains is determined based on the required number of drops. As is, the drop determines the amount of labor and time defining the final product. That is, the amount of time spent in matching patterns and coming up with headers. The number of drops is mainly influenced by 2 decisions such as the width of the chosen fabric of interest and how full an individual requires the fabric to look like. Incidentally, when utilizing a wider fabric, such as 150cm, an individual requires lesser drops of about 120cm (Powers 28). Utilizing twice as much as fabric as the curtain’s width is regarded as a norm implemented when designing them. However, this is not mandatory as an individual can utilize less and save a drop. Length of Track Length of Track is relevant in fabric measurement as it refers to the length of pole being utilized to ascertain the amount of fabric required. The length of the track is measured from the By GetGoodGrade.com

2. Surname 2 rings base where the curtains will hang from. However, in this case the measure is done from 1cm from the top most edge due to the fact that a track is being utilized. The 1cm allowance is needed to ensure that the curtain’s heading hides the track. However, in cases of floor-length curtains, a 1.5cm clearance allowance is allowed between the floor and the edge of the curtain. For curtains that touch the floor, a designer should provide an extra 5cm to the length of the curtain and 51cm incase an individual requires the curtain to puddle on the floor. Additionally, 12cm is added at the top besides 3cm for the sake turning (Powers 28). Width of the Fabric Width measurement is relevant due to the fact that it provides an overview of the amount of fabric required to cover the width of a window. To arrive at the width figure, the length of the pole in use is measured and later multiplied by 1.5 incases where an individual desires to utilize a standard heading tape. On the contrary, if a person opts for a pencil pleat tape, the length of the pole will be multiplied by 2.5. Subsequently, 20cm is added on both sides to provide an allowance for the side hems (Burrell 12). The figure is later subdivided by the fabric’s width and the final figure rounded up to the nearest whole number. Question Two Various proportions are required when choosing pelmets, tails and swags when designing curtains. Pelmets Pelmets refers to the decorated board mounted above a window treatment (Williamson 100). It is evident that pelmets must be proportionate to the window in order to have the right effect to the general design of the curtain. As is, having them too small or large makes them look By GetGoodGrade.com

3. Surname 3 out of place. To avoid this, the height of the pelmet should be approximately a sixth of the curtain’s length. Pelmets are desirable to the overall design of a window’s treatment due to the fact that they add sophistication to the general window treatment by providing it with a fantastic look. In addition, pelmets are known to conceal any curtain fixings that may be undesirable when noticed. Besides, the pelmets are known to control light and heat coming from the window’s top hence making the room in question more cooler. The fact that pelmets are made from MDF, wood or other similar material contributes towards the contrasting look of the window treatment explaining the sophistication element brought about by their availability. As is, wood is considered as an important contrast that a person ought to consider when creating any visual element intended to be appealing (Oliphant 15). Swag and Tails Swags refers to the loop section at the decorative window treatment’s top. Normally, the swag forms a u shape as it hangs down the window treatment. On the other hand, tail refers to the hanging part of the swag at the window’s side. Swags and tails are used with a main purpose of creating an elegant look on curtains. Generally, it is recommended that swags should be around a sixth the window treatment’s length. On the other hand, the tails are required to be between two thirds and a third of the curtain’s length. Swags and tails can be designed from contrasting or coordinating colors. The only limitation for a person in this case is the existing type of fabric that an individual can find. Swags and tails provides an elegant and a luxurious look on the general look of the window treatment. By GetGoodGrade.com

4. Surname 4 Works Cited Burrell, Kirsty. "William Chambers, The 'Very Pretty Conoisseur'--The Interiors At Duddingston House And The.." Architectural Heritage 11.1 (2000): 12. Academic Search Premier. Web. 3 Mar. 2016. Oliphant, Jane. "Keeping Tabs On Windows." Cabinet Maker 5199 (2000): 15. Business Source Complete. Web. 3 Mar. 2016. Powers, Alan. "Drawing On Curtains." Building Design 1616 (2004): 28. Business Source Complete. Web. 3 Mar. 2016. Williamson, Gayle A. "Cushions & Curtains (Book)." Library Journal 127.1 (2002): 100. Academic Search Premier. Web. 3 Mar. 2016. By GetGoodGrade.com