1 / 16

HOME AUTOMATION USING PC

HOME AUTOMATION USING PC . DONE BY RAJESHKUMAR S SRI HARSHA D. MAIN APPLICATION OF PROJECT. The aim of the project is to control home appliances like Television, Refrigerator, and Lights and other home electrical appliances using a personal computer.

gilda
Download Presentation

HOME AUTOMATION USING PC

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HOME AUTOMATION USING PC DONE BY RAJESHKUMAR S SRI HARSHA D

  2. MAIN APPLICATION OF PROJECT The aim of the project is to control home appliances like Television, Refrigerator, and Lights and other home electrical appliancesusing a personal computer. In this project a PC is interfaced with a micro-controller and it is connected to relays to which the appliances which are to be controlled are connected. The micro-controller controls the relays for switching the appliances, ON or OFF. Pre-defined symbols are sent to the Microcontroller through RS232 cable

  3. What Is Home Automation Home automation deals with providing a network in the house which links • computers & peripheral equipment. • smart chip bearing household appliances likedish washers, washing machines, microwaves and other electrical appliances. • sub-systems like Heating, Ventilation, Air-conditioning (HVAC), and security systems.

  4. Micro Controller Power supply ReLay Driver FAN Relay Relay MAX MAX 232 LIGHT PCM BLOCK DIAGRAM Power supply

  5. ADVANTAGES OF HOME AUTOMATION • Flexibility & Convenience • Security • Cost Saving • Remote Control

  6. EMBEDDED SYSTEM An embedded system can be defined as a computing device that does a specific focused job. Appliances such as the air-conditioner, VCD player, DVD player, printer, fax machine, mobile phone etc. are examples of embedded systems. Each of these appliances will have a processor and special hardware to meet the specific requirement of the application along with the embedded software that is executed by the processor for meeting that specific requirement.

  7. MICROCONTROLLER VS MICROPROCESSOR • Microprocessors and microcontrollers are widely used • in embedded systems products. • Microcontroller is a programmable device. • A microcontroller has a CPU in addition to a fixed • amount of RAM, ROM, I/O ports and a timer • embedded all on a single chip. • The fixed amount of on-chip ROM, RAM and number • of I/O ports in microcontrollers makes them ideal for • many applications in which cost and space are critical.

  8. INTERNALARCHITECTURE All upgraded microcontrollers use one of two basic design models called Harvard and von-Neumann architecture VON-NEUMANN ARCHITECTURE Microcontrollers using this architecture have only one memory block and one 8-bit data bus. As all data are exchanged by using these 8 lines, this bus is overloaded and communication itself is very slow and inefficient The CPU can either read an instruction or read/write data from/to the memory. Both cannot occur at the same time since the instructions and data use the same bus system

  9. HARVARD ARCHITECTURE Microcontrollers using this architecture have two different data buses. One is 8-bit wide and connects CPU to RAM memory. Another one consists of several lines (12, 14 or 16) and connects CPU to ROM memory Accordingly, the CPU can read an instruction and perform a data memory access at the same time

  10. PIN Diagram Of Micro Controller Of AT89S8252

  11. TIMERS SFR’S USED IN TIMERS: • The special function registers used in timers are • TMOD Register • TCON Register Timer(T0) & timer(T1) Registers

  12. TMOD Register: • TMOD is dedicated solely to the two timers (T0 & T1). • The timer mode SFR is used to configure the mode of operation of each of the two timers. • Using this SFR your program may configure each timer to be a 16-bit timer, or 13 bit timer, 8-bit auto reload timer, • or two separate timers. • It can consider as two duplicate 4-bit registers, each of which controls the action of one of the timers.

  13. TCON Register • The timer control SFR is used to configure and modify the way in which the 8051’s two timers operate. • This SFR controls whether each of the two timers is running or stopped and contains a flag to indicate that each timer has overflowed. Additionally, some non-timer related bits are located in TCON SFR. • These bits are used to configure the way in which the external interrupt flags are activated, which are set when an external interrupt occurs.

  14. CONCLUSION By using this project we control all the Electrical appliances of Home using PersonalComputer via RS232 as the communication medium between pc and controller. We are controlling the devices like light and fan and etc by sending signals from the pc to controller. This project gives exact concept of interfacing a high voltage electrical device or DC / AC motor to high sensitive personal computer system.

  15. Thank You

More Related