1 / 11

Concentration

Concentration. Solution Concentration. Read 509-515. Try practice problems 8-17 (show work) Concentration = quantity of solute quantity of solution (not solvent) There are 3 basic ways to express concentration: 1) percentages,

ginny
Download Presentation

Concentration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Concentration

  2. Solution Concentration Read 509-515. Try practice problems 8-17 (show work) Concentration = quantity of solute quantity of solution (not solvent) There are 3 basic ways to express concentration: 1) percentages, 2) very low concentrations, and 3) molar concentrations 1) % concentration can be in V/V, W/W, or W/V • Like most %s, V/V and W/W need to have the same units on top and bottom. • W/V is sort of in the same units; V is mostly water and water’s density is 1 g/mL or 1 kg/L 3gH2O2/100mLsolution  3gH2O2/100gsolution

  3. Solution Concentration 2) Expressing concentrations in parts per million (ppm) requires the unit on top to be 1,000,000 times smaller than the unit on the bottom E.g. 1 mg/kg or g/g • Multiples of 1000 are expressed in this order _, m_, _, k_ (“_” is the base unit, e.g. g, L) • Notice that any units expressed as a volume must be referring to a water solution (1L = 1kg) • For parts per billion (ppb), the top unit would have to be 1,000,000,000 times smaller 3) Molar concentration is the most commonly used in chemistry. Ensure that units are mol/L.

  4. FORMULAS Molarity = moles solute/liters solution Moles of solute = M1 x V1 = M2 x V2 Percent by volume = volume solute/solution volume x 100% Percent by mass = mass solute/solution volume x 100%

  5. Please attempt to work the following problems out before you look at the answers. REMEMBER: only practice will help you get better at Chemistry, so, don’t cheat yourself out of the opportunity to earn a better grade.

  6. PROBLEMS FROM CHAPTER 18, SECTION 12 8. A solution has a volume of 2 L & contains 36 g of glucose. What is the molarity of the solution? 9. A solution has a volume of 250 mL & contains 0.7 mol NaCl. What is its molarity? 10. How many moles of ammonium nitrate are in 335 mL of 0.425 M solution? 11. How many moles of solute are in 250 mL of 2 M calcium chloride? How many grams of calcium chloride is this? 12. How many mL of a stock solution of 4 M KI would be needed to prepare 250 mL of 0.76 M KI? 13. You need 250 mL of 0.2 M NaCl, but all you have is a 1 M solution. How do you prepare the required solution?

  7. 14. If 10 mL of acetone is diluted with water to a total solution volume of 200 mL, what is the percent by volume in the solution? 15. A bottle of hydrogen peroxide is labeled 3%. How many mL of hydrogen peroxide is in a 400 mL bottle? 16. Calculate the grams of solute to make 250 mL of 0.1% magnesium sulfate. 17. A solution contains 2.7 grams of copper(II) sulfate in 75 mL of solution. What is the percent of the solution?

  8. SOLUTIONS FOLLOW

  9. 36 g/180g/mol/2.0 L = 0.1 M 9. .7 mol x 58.45 g/mol/.25 L/58.45g/mol = 2.8 M 10. .335 L x .425 M/1 L = .142 M 11. .25 L x 2.0 M/1 L = .50 M .50 Mx 110.99 g/mol = 55.5 g 12..76 M x .25 L/4 M = .0475 L or 47.5 mL 13. Use a pipette to transfer 50 mL of 1.0 M solution to a 250 mL volumetric flask, then fill with distilled water. 250 mL x .2 M = 50 mL. 14. 10 mL/200mL = .05 x 100% = 5% 15. .03 = X/400 mL = 12 mL

  10. 16. .001 = X g/250 mL = .25 g magnesium sulfate 17. 2.7 g/75 mL = 0.036 x100% = 3.6 % copper (II) sulfate

  11. More practice 10 g / 260 g = 3.8 % 30 mL / 280 mL = 11% (in reality may be off) 8.0 g / 100 g = 8% • What is the % of copper in an alloy when 10 g of Cu is mixed with 250 g of Zn? • What is approximate % if 30 mL of pure ethanol is added to 250 mL of water? • What is the %if 8.0g copper is added to enough zinc to produce 100 g of an alloy?

More Related