1 / 8

Home Security Sensor Configuration Guide

Learn how to set up and configure the device code for different security sensors. Register your sensors and link them to the monitoring system with detailed instructions provided in the project settings menu. Seamlessly switch between alarm modes and customize sensor settings for various scenes. Follow the step-by-step guide for a comprehensive setup process.

gjoyner
Download Presentation

Home Security Sensor Configuration Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Security Sensor Configure Instruction -- Home Security

  2. Device Code Setting Setting the Device Code of different Security Sensor Joint the Pin to make the device doce different

  3. Security Sensor Register Enter the Project Setting Menu, and choose the Electrical Setting > Device Setting for register.

  4. RF Signal Exchanger One set RF Signal Exchanger for 6 group of Security Sensor register, Support the Senor type 433MHz or 315MHz http://en.taichuan.com/service/view/21efb7fd-8874-4922-87e5-563e1c0d0020

  5. Wired to Wireless Alarm The intelligent Alarm Module support the wired Security Sensor wireless register to the indoor monitor Up position is switch to 24H Force alarm mode Middle position is switch to Register mode Down position is switch to Normal alarm mode

  6. Arming & Disarming Setting Enter the Appliances Setting Menu, and choose the Scenes Setting to edit each registered security sensor for each Scene. Add the required security sensor which already registered, Enable or Disable for each Scene setting. e.g. enable all the security sensor ON under the OUTHOME scene, when switch to the Outhome scene, if any sensor is triggered, it will alarm to the indoor monitor and management center. The default disarming code is: 1234

  7. Wired Alarm Sensor Wired Alarm Sensor To Indoor monitor

  8. THANK YOU!

More Related