1 / 24

Lecture Objectives:

Lecture Objectives:. Finish with Sorption cooling Review Electric power generation. Simple absorption system. 3 V. 3 L. 3 LLP. Simple absorption system. Saturated vapor at p 2 =p 3 =p 4. 3 V. 6. 3. 5 V. mixing. 1’. Needed thermal energy. Useful cooling energy. 4. 3 L. 5.

gpursley
Download Presentation

Lecture Objectives:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture Objectives: • Finish with Sorption cooling • Review Electric power generation

  2. Simple absorption system 3V 3L 3LLP

  3. Simple absorption system Saturated vapor at p2=p3=p4 3V 6 3 5V mixing 1’ Needed thermal energy Useful cooling energy 4 3L 5 3LLP 2 Saturated liquid at p2=p3=p4 Saturated liquid at p1=p5=p6=p3_LLP 1 5L

  4. Absorption cooling with preheaterSystem improvement #1 Rich ammonia vapor 4 5 Refrigeration and air conditioning (Ramesh et al)

  5. Absorption cooling with preheater Saturated vapor at p1’ 1’’’V=3 Major heat source 6 1’’’ mixing isotherm 6h 1’’ Useful cooling energy 1’’’L =2 4 5 1’ Saturated liquid at p1’ 2’ , 2’’ Saturated liquid at p1 1 Cooling tower Pumping energy COP= Q cooling / Q heating (Pump ???)

  6. For Real energy analysis you need real h-x diagram! hfg for H2O hfg for NH3

  7. Use of precooling(system improvement #2)

  8. Absorption cooling with precooling Saturated vapor at p1’ 1’’’V=3 Major heat source 6’ 6 1’’’ 6h mixing Saturated liquid at p1’ isotherm 1’’ Useful cooling energy (larger!) 1’’’L =2 4 1’ Saturated liquid at p1 4’ 2’ , 2’’ 5 1 Cooling tower (needs to cool more!) Pumping energy

  9. System improvement #3(described as Rectification) Generator with Enrichment of NH3 Different 8V 9 8L 10 8LLP 11

  10. Heat transfer with separation into liquid and vapor (Generator) How to move point 4 to right ? =2V =2V heating m4 Q12 /m1 2L= 2L= =m2 m1 =m2 mixture Separator mixture sub cooled liquid x1 x1 m3 Q12 m3 Q12

  11. Heat rejection with separation into liquid and vapor (Enrichment NH3 in the vapor mixture) This is our point cooling 1 4=2V Separator 6=5V Q12 /m1 cooling Q45 /m4 x8 m8 8 7 5 m1 =m2 2 mixture isotherm sub cooled liquid m3 2L Q12 x8 x1

  12. Heat rejection with separation into liquid and vapor (Enrichment NH3 in the vapor mixture) This is our point cooling 1 4=2V Separator 6=5V Q12 /m1 cooling Q45 /m4 x8 m8 8 7 5 m1 =m2 2 mixture isotherm sub cooled liquid m3 2L Q12 x8 x1

  13. Ammonia Vapor Enrichment Process(Rectification)

  14. Absorption system with Enrichment (no preheater nor precooler) Saturated vapor at p2 3V 8V mixing 3 11 8L 1’ Useful cooling energy 8LLP 10 2 3L 9 Saturated liquid at p2 Saturated liquid at p1 1

  15. Combined heat and power(cogeneration CHP or three generation CCHP) Here, we use thermal energy for heating and/or cooling

  16. Gas powered turbine http://www.youtube.com/watch?feature=player_embedded&v=rxps0sZ8T3Y

  17. Combustion product gas powered turbines • Limited to gas or oil as a major source of fuel • Approximately 55 to 65% of the power produced by the turbine is used for compressor. • Gas temperatures at the turbine inlet can be 1200ºC to 1400ºC • Because of the power required to drive the compressor, energy conversion efficiency for a simple cycle gas turbine plant is ~ 30%

  18. Combined Cycle(gas and steam) http://www.youtube.com/watch?feature=player_embedded&v=D406Liwm1Jc

  19. Steam powered turbine

  20. Ideal Rankine Cycle h1=hf saturated liquid Wpump (ideal)=h2-h1=vf(Phigh-Plow) vf=specific volume of saturated liquid at low pressure qin=h3-h2 heat added in boiler Usually either qin will be specified or else the high temperature and pressure (so you can find h3) qout=h4-h1 heat removed from condenser) wturbine=h3-h4 turbine work

  21. Reheat Cycle • It allows increase boiler pressure without problems of low quality at turbine exit

  22. Regeneration • Preheats steam entering boiler using a feed-water heater, improving efficiency

  23. Further improvements

  24. Analogy with cooling cycles

More Related