1 / 29

National Backflow Prevention Conference 2-3 August 2013

National Backflow Prevention Conference 2-3 August 2013. Presented by Glenn Tate. IAPMO World Head Quarters - Ontario, California. IAPMO Backflow Prevention. National Code Construction Code Series. National Construction Code Series 2013 Volume Three. A General Provisions.

graceland
Download Presentation

National Backflow Prevention Conference 2-3 August 2013

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. National Backflow Prevention Conference2-3 August 2013 Presented by Glenn Tate IAPMO R&T Oceana Pty. Ltd.

  2. IAPMO World Head Quarters - Ontario, California IAPMO R&T Oceana Pty. Ltd.

  3. IAPMO Backflow Prevention IAPMO R&T Oceana Pty. Ltd.

  4. IAPMO R&T Oceana Pty. Ltd.

  5. National Code ConstructionCode Series National Construction Code Series 2013 Volume Three IAPMO R&T Oceana Pty. Ltd.

  6. A General Provisions PART A2ACCEPTANCE OF DESIGN AND CONSTRUCTION • A2.1   Suitability of materials and products • (a) Every part of a plumbing or drainage installation must be constructed in an appropriate manner to achieve the requirements of the PCA, using materials and products that are fit for the purpose for which they are intended. • (b) Materials or products listed in Table A2.1 which are used in plumbing or drainage installations must be certified and authorised. • (c) Product certification and authorisation must comply with the procedures set out in Part G1. • (d) Materials and products intended for use in contact with drinking water must comply with AS/NZS 4020. • (e) Any new or innovative material or product must be assessed, certified and authorised, if required, in accordance with Part G1 prior to their use in a plumbing or drainage installation. IAPMO R&T Oceana Pty. Ltd.

  7. A General Provisions IAPMO R&T Oceana Pty. Ltd.

  8. Materials and products certifications and authorisation G1.4Authorisation A material or product that is listed on the WaterMark Product Database and is marked in accordance with the WaterMark Certification Scheme is recognised by authorities having jurisdiction as being authorised for use in a plumbing or drainage installation. IAPMO R&T Oceana Pty. Ltd.

  9. Materials and products certifications and authorisation IAPMO R&T Oceana Pty. Ltd.

  10. Materials and products certifications and authorisation G1.5.4.3 Materials and products with a consequence score of more than 4 (Certification Level 1) • For materials and products with a consequence score of more than 4 to achieve certification to WaterMark, they must be certified as fully complying with an approved specification through product testing. • Full product testing for Certification Level 1 must be certified as having been carried out in a recognised testing laboratory by the WMCAB. • The manufacture of the material or product must be certified by the WMCAB as having been carried out in accordance with a Full Quality Assurance Program (as set out in ISO/IEC Guide 67) appropriate for the material or product. • In addition, the approved user must comply with the conditions of the WaterMark licence. • The material or product is granted certification to use the WaterMark if all of the above requirements are met. IAPMO R&T Oceana Pty. Ltd.

  11. WATERMARK CERTIFICATION LEVELS There are two (2) levels of Certification. WaterMark Level 1 – Requires that products comply with a specific Australian or International Standard or other suitable published document and are certified under a program in accordance with the principles of ISO/IEC Guide 67, System 5. WaterMark Level 2 – Requires that products comply with a specific Australian or International Standard or other suitable published document and are certified under a program in accordance with the ISO/IEC Guide 67, System 1b. WaterMark Certification Levels IAPMO R&T Oceana Pty. Ltd.

  12. ISO GUIDE 67 – Fundamentals of product certification • ISO GUIDE 67 – Fundamentals of product certification IAPMO R&T Oceana Pty. Ltd.

  13. 5 MATERIALS IN CONTACT WITH POTABLE WATERMaterials and components in contact with potable water for human consumption shall comply with AS/NZS 4020:2005. • 5 MATERIALS IN CONTACT WITH POTABLE WATER NOTES:2. The microbial test is undertaken for products that contain non-metallic wetted components. Testing of the products is usually conducted at 30ºC and covers products that operate at less than 40ºC (see Appendix E) IAPMO R&T Oceana Pty. Ltd.

  14. APPENDIX B: A GUIDE TO THE USE OF WATERMARK ON PLUMBING AND DRAINAGE PRODUCTS SUPPLIED UNDER THE WMCS B1 REQUIREMENT FOR CERTIFICATION MARKING Plumbing and drainage products used in Australia and supplied under the WMCS should bear the WaterMark once they have been certified by the CAB. Applying the WaterMark to the product provides evidence that the product is - (a) manufactured under a nationally recognized certification scheme and certified by a CAB; (b) supplied and warranted by the manufacturer as complying with the appropriate Specification; and (c) easily recognized by the regulator, tradesmen, distributors and retailers as being certified. The application of a WaterMark on a plumbing and drainage product is a requirement under various Australian State regulations. For most applications, the shape and styles of the WaterMark are shown in Figure B1. • APPENDIX B: B1 REQUIREMENT FOR CERTIFICATION MARKING IAPMO R&T Oceana Pty. Ltd.

  15. POSITIONING OF CERTIFICATION MARKS Due to the complexity of products, there are many different ways of positioning the certification mark on products (see Figure B2). Wherever possible, the CAB will provide guidance and consider any proposals put forward. Some of the main criteria in positioning the WaterMark are as follows: (a) The WaterMark shall be clearly visible on the finished product so the installer is aware that the product is certified. (b) The positioning of the WaterMark shall not mislead the product user to believe the product is certified for other than the applicable Standard/Specification. (c) Where components are combined, the WaterMark shall be positioned to clearly indicate that the complete assembly is certified. (d) Marked components should not be incorporated or combined in such a manner as to misrepresent certification of another product. • POSITIONING OF CERTIFICATION MARKS IAPMO R&T Oceana Pty. Ltd.

  16. POSITIONING OF CERTIFICATION MARKS ATS 5200.001 C of C 9999 ATS 5200.001 C of C 9999 • POSITIONING OF CERTIFICATION MARKS Figure B1 NORMAL AND SPECIAL PRESENTATIONS IAPMO R&T Oceana Pty. Ltd.

  17. AS/NZS 2845.1 Section 3 COMMON DESIGN AND PERFORMANCE REQUIREMENTS • 3.1 GENERAL This Section specifies requirements for the design and manufacture of backflow prevention devices. • 3.2 EFFECTS ON WATER Backflow Prevention devices shall comply with AS/NZS 4020. A sealing factor of 0.01 shall be applied for devices DN 100 and above and 0.05 for devices <DN 100, except for HCVB and BDDC devices which shall be tested as end-of-line fittings • AS/NZS 2845.1: 2010 IAPMO R&T Oceana Pty. Ltd.

  18. AS/NZS 2845.1 APPENDIX AMEANS FOR DEMONSTRATING COMPLANCE WITH THIS STANDARD (Normative) A1 SCOPE This Appendix sets out the means by which compliance of each device with this Standard has to be determined by a manufacturer under the WaterMark product certification scheme. A2 RELEVANCE The long-term performance of plumbing systems is critical to durability of building infrastructure, protection of public health and safety, and protection of the environment. A3 PRODUCT CERTIFICATION The Purpose of product certification is to provide independent assurance of the claim by the manufacturer that products comply with this Appendix. The certification scheme serves to indicate that the products consistently conform to the requirements of this Appendix and the sampling plans of each device. The frequency of the sampling and testing plan is detailed in Paragraph A5, shall be used by the Conformity Assessment Body. Where a batch release testing program is required, it shall be carried out by the manufacturer as detailed in this Appendix for sampling and frequency plans. • AS/NZS 2845.1: 2010 IAPMO R&T Oceana Pty. Ltd.

  19. AS/NZS 2845.1 A6.9 Reduced pressure zone device (RPZD)The compliance sampling and frequency plans for reduced pressure zone devices shall be as given in Tables A17 and A18. TABLE A17 MINIMUM SAMPLING AND TESING FREQUENCY PLAN – TYPE TESTS REDUCED PRESSURE ZONE DEVICE (RPZD) • AS/NZS 2845.1: 2010 IAPMO R&T Oceana Pty. Ltd.

  20. AS/NZS2845.1 TABLE A17 MINIMUM SAMPLING AND TESING FREQUENCY PLAN – TYPE TESTS REDUCED PRESSURE ZONE DEVICE (RPZD)(Continued) • AS/NZS 2845.1: 2010 IAPMO R&T Oceana Pty. Ltd.

  21. AS/NZS 2845.1: 2010 TABLE A18MINIMUM SAMPLING AND FREQUENCY PLAN- BATCH RELEASE TESTS – REDUCED PRESSURE ZONE DEVICE (RPZD) • AS/NZS 2845.1: 2010 IAPMO R&T Oceana Pty. Ltd.

  22. IAPMO R&T OCEANA – TEST PROGRAM IAPMO R&T Oceana Pty. Ltd.

  23. IAPMO R&T OCEANA – TEST PROGRAM IAPMO R&T Oceana Pty. Ltd.

  24. IAPMO R&T OCEANA – TEST PROGRAM IAPMO R&T Oceana Pty. Ltd.

  25. IAPMO R&T OCEANA – TEST PROGRAM IAPMO R&T Oceana Pty. Ltd.

  26. IAPMO R&T OCEANA – TEST PROGRAM IAPMO R&T Oceana Pty. Ltd.

  27. PRODUCT CERTIFICATIONINSPECTION REPORT • AS/NZS 2845.1: 2010 IAPMO R&T Oceana Pty. Ltd.

  28. WaterMark Level 1 & Level 2 Certification Guide • WaterMark Level 1 & Level 2 Certification Guide IAPMO R&T Oceana Pty. Ltd.

  29. Thank YouAny Questions? IAPMO R&T Oceana Pty. Ltd.

More Related