1 / 28

Example DLL Protocols

Learn about MAC protocols, CSMA, CSMA/CD, Ethernet, and more! Dive into the world of network protocols, channel allocation, and data transmission techniques.

graym
Download Presentation

Example DLL Protocols

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Example DLL Protocols 1. High-Level Data Link Control (HDLC). 2. Point-to-Point Protocol (PPP).

  2. HDLC Flag Identifies host. ACK, seq. # CRC

  3. PPP • Internet’s DLL. • Router-to-router. • Home user-to-ISP. • RFC 1661, etc. • PPP is a multi-protocol framing mechanism that can be used over multiple PHYs (dial-up, dedicated point-to-point connections).

  4. Why MAC? • Point-to-point versus shared-medium networks. • Shared-medium networks use “broadcast” channels. • multi-access or random access channels. MAC layer protocols regulate access to medium in shared-medium networks.

  5. MAC and LANs • LANs typically use shared-medium. • Examples? • MAC layer critical! • BTW, in wireless networks also! • WANs typically use point-to-point connections

  6. Channel Allocation Problem • How to allocate single shared, broadcast channel among several stations/users. • If no arbitration, several stations/users may transmit at the same time: COLLISIONS!

  7. MAC Protocols • Contention-based • ALOHA and Slotted ALOHA. • CSMA. • CSMA/CD. • Round-robin : token-based protocols. • Token bus. • Token ring.

  8. Pure ALOHA • In pure ALOHA, frames are transmitted at completely arbitrary times.

  9. Carrier Sense Multiple Access • The capacity of ALOHA or slotted ALOHAis limited by the large vulnerability period of a packet. • By listening before transmitting, stations try to reduce the vulnerability period to one propagation delay. • This is the basis of CSMA.

  10. CSMA • Station that wants to transmit first listens to check if another transmission is in progress (carrier sense). • If medium is in use, station waits; else, it transmits. • Collisions can still occur. • Transmitter waits for ACK; if no ACKs, retransmits.

  11. Channel Busy? Packet ready yes no transmit delay packet transmission k times wait for a round-trip time positive ack? compute random backoff integer k no yes CSMA Protocol • CSMA

  12. CSMA (cont’d) • Collisions can occur only when 2 or more stations begin transmitting within short time. • If station transmits and no collisions during the time leading edge of frame propagates to farthest station, then NO collisions.

  13. CSMA Flavors • After detecting carrier, a station can persist trying to transmit after the channel is idle again. • 1-persistent CSMA (IEEE 802.3) • If medium idle, transmit; if medium busy, wait until idle; then transmit. • If collision, waits random period and starts again. • Non-persistent CSMA: if medium idle, transmit; otherwise wait a random time before re-trying. • Thus, station does not continuously sense channel when it is in use. • P-persistent: when channel idle detected, transmits packet in the first slot.

  14. CSMA versus Aloha Comparison of the channel utilization versus load for various random access protocols.

  15. CSMA/CD • CSMA with collision detection. • Problem: when frames collide, medium is unusable for duration of both (damaged) frames. • For long frames (when compared to propagation time), considerable waste. • What if station listens while transmitting?

  16. CSMA/CD Protocol 1. If medium idle, transmit; otherwise 2. 2. If medium busy, wait until idle, then transmit with p=1. 3. If collision detected, transmit brief jamming signal and abort transmission. 4. After aborting, wait random time, try again.

  17. CSMA/CD Performance • Wasted capacity restricted to time to detect collision. • Time to detect collision < 2*maximum propagation delay. • Rule in CSMA/CD protocols: frames long enough to allow collision detection prior to end of transmission.

  18. CSMA with Collision Detection • CSMA/CD can be in one of three states: contention, transmission, or idle.

  19. Ethernet • IEEE 802. family. • Standards for LANs and MANs. • Ethernet defined in the IEEE 802.3 standard.

  20. Ethernet MAC • CSMA/CD. • Binary exponential back-off. • CRC

  21. Ethernet Frame • Frame formats. (a) DIX Ethernet, (b) IEEE 802.3.

  22. Ethernet MAC (Cont’d)

  23. Ethernet Frame Length • At 10Mbps with 2,500 m maximum distance: • RTT ~ 50 microsec. • Thus, at least 500-bit frames. • It is actually 512 bits. • If fewer bits than that, add “padding”.

  24. Ethernet Cabling • The most common kinds of Ethernet cabling.

  25. Switched Ethernet • A simple example of switched Ethernet.

  26. Fast Ethernet The original fast Ethernet cabling.

  27. Gigabit Ethernet • Gigabit Ethernet cabling.

  28. Intro to 802.5 and ATM • 802.5 Token ring networks • ATM – Asynchronous Transfer Mode

More Related